DP7310/DP8310/DP7311/DP8311 Octal Latched Peripheral Drivers Y General Description The DP7310/8310, DP7311/8311 Octal Latched Peripheral Drivers provide the function of latching eight bits of data with open collector outputs, each driving up to 100 mA DC with an operating voltage range of 30V. Both devices are designed for low input currents, high input/output voltages, and feature a power up clear (outputs off) function. The DP7310/8310 are positive edge latching. Two active low write/enable inputs are available for convenient data bussing without external gating. The DP7311/8311 are positive edge latches. The active low strobe input latches data or allows fall through operation when held at logic ``0''. The latches are cleared (outputs off) with a logic ``0'' on the clear pin. Y Y Y Y Applications Y Y Y Y Y Y Y Features Y Y Y High current, high voltage open collector outputs Low current, high voltage inputs All outputs simultaneously sink rated current ``DC'' with no thermal derating at maximum rated temperature Parallel latching or buffering Separate active low enables for easy data bussing Internal ``glitch free'' power up clear 10% VCC tolerance Y High current high voltage drivers Relay drivers Lamp drivers LED drivers TRIAC drivers Solenoid drivers Stepper motor drivers Level translators Fiber-optic LED drivers Connection Diagrams Dual-In-Line Package Dual-In-Line Package TL/F/5246 - 1 Top View TL/F/5246 - 2 Top View Order Number DP7310J, DP7311J, DP8310N or DP8311N See NS Package Number J20A or N20A C1995 National Semiconductor Corporation TL/F/5246 RRD-B30M105/Printed in U. S. A. DP7310/DP8310/DP7311/DP8311 Octal Latched Peripheral Drivers February 1995 Absolute Maximum Ratings (Note 1) Operating Conditions If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage (VCC) Supply Voltage Input Voltage Output Voltage Maximum Power Dissipation* at 25 C Cavity Package DP8310/DP8311 Storage Temperature Range Temperature DP7310/DP7311 DP8310/DP8311 7.0V 35V 35V Min 4.5 Max 5.5 Units V b 55 a 125 a 70 C C 30 30 V V Max Units 0.8 V 0 Input Voltage Output Voltage 1821 mW 2005 mW b 65 C to a 150 C Lead Temperature (Soldering, 4 sec.) 260 C *Derate cavity package 12.1 mW/ C above 25 C; derate molded package 16.0 mW/ C above 25 C. DC Electrical Characteristics DP7310/DP8310, DP7311/DP8311 (Notes 2 and 3) Symbol Parameter VIH Logical ``1'' Input Voltage VIL Logical ``0'' Input Voltage VOL Logical ``0'' Output Voltage Conditions Min Typ 2.0 V Data outputs latched to logical ``0'', VCC e Min. IOL e 75 mA IOL e 100 mA 0.35 0.4 0.5 V V Data outputs latched to logical ``1'', VCC e Min. VOH e 25V VOH e 30V 2.5 500 250 mA mA Logical ``1'' Input Current VIH e 2.7V, VCC e Max 0.1 25 mA II Input Current at Maximum Input Voltage VIN e 30V, VCC e Max 1 250 mA IIL Logical ``0'' Input Current VIN e 0.4V, VCC e Max b 215 b 300 mA Vclamp Input Clamp Voltage IIN e 12 mA b 0.8 b 1.5 V ICC0 Supply Current, Outputs On Data outputs latched to a logical ``0''. All Inputs are at logical ``1'', VCC e Max. 100 100 88 88 125 152 117 125 mA mA mA mA 40 40 25 25 47 57 34 36 mA mA mA mA DP7310/DP7311 DP8310/DP8311 IOH Logical ``1'' Output Current DP7310/DP7311 DP8310/DP8311 IIH DP7310 DP8310 DP7311 DP8311 ICC1 Supply Current, Outputs Off Data outputs latched to a logic ``1''. Other conditions same as ICC0. DP7310 DP8310 DP7311 DP8311 2 AC Electrical Characteristics DP7310/DP8310: VCC e 4.5V, TA e b55 C to a 125 C Symbol Parameter Conditions Min Typ Max Units 40 120 ns 70 150 ns tpd0 High to Low Propagation Delay Write Enable Input to Output (Figure 1) tpd1 Low to High Propagation Delay Write Enable Input to Output (Figure 1) tSETUP Minimum Set-Up Time Data in to Write Enable Input tHOLD e 0 ns (Figure 1) tpWH, tpWL Minimum Write Enable Pulse Width (Figure 1) tTHL High to Low Output Transition Time (Figure 1) 16 35 tTLH Low to High Output Transition Time (Figure 1) 38 70 ns CIN ``N'' Package (Note 4) 5 15 pF Typ Max Units 30 60 ns 70 100 ns 45 20 ns 60 25 ns ns AC Electrical Characteristics DP7311/DP8311: VCC e 5V, TA e 25 C Symbol Parameter Conditions Min tpd0 High to Low Propagation Delay Data In to Output (Figure 2) tpd1 Low to High Propagation Delay Data to Output (Figure 2) tSETUP Minimum Set-Up Time Data in to Strobe Input tHOLD e 0 ns (Figure 2) 0 b 25 ns tpWL Minimum Strobe Enable Pulse Width (Figure 2) 60 35 ns tpdC Propagation Delay Clear to Data Output (Figure 2) tpWC Minimum Clear Input Pulse Width (Figure 2) 60 25 tTHL High to Low Output Transition Time (Figure 2) 20 35 tTLH Low to High Output Transition Time (Figure 2) 38 60 ns CIN Input CapacitanceAny Input (Note 4) 5 15 pF 70 135 ns ns ns Note 1: ``Absolute Maximum Ratings'' are those values beyond which the safety of the device cannot be guaranteed. Except for ``Operating Temperature Range'' they are not meant to imply that the devices should be operated at these limits. The table of ``Electrical Characteristics'' provides conditions for actual device operation. Note 2: Unless otherwise specified min/max limits apply across the b 55 C to a 125 C temperature range for the DP7310/DP7311 and across the 0 C to a 70 C for the DP8310/DP8311. All typical values are for TA e 25 C, VCC e 5V. Note 3: All currents into device pins shown as positive, out of device pins as negative, all voltages referenced to ground unless otherwise noted. Note 4: Input capacitance is guaranteed by periodic testing. fTEST e 10 kHz at 300 mV, TA e 25 C. 3 Logic Table DP7310/DP8310 DP7311/DP8311 Write Enable 1 WE1 Write Enable 2 WE2 Data Input DI1 - 8 Data Output DO1 - 8 0 0 0 O O 0 1 1 0 O O 0 0 1 0 1 X 0 1 0 1 X X X Q 1 0 1 0 Q Q Q Clear CLR Strobe STR Data Input DI1- 8 Data Output DO1-8 1 1 1 0 1 0 0 X X 0 1 X Q 1 0 1 X e Don't Care 1 e Outputs Off 0 e Outputs On Q e Pre-existing Output O e Positive Edge Transition Block Diagrams DP7310/DP8310 TL/F/5246 - 3 DP7311/DP8311 TL/F/5246 - 4 4 Switching Time Waveforms DP7310/DP8310 TL/F/5246 - 5 DP7311/DP8311 TL/F/5246 - 6 Switching Time Test Circuits TL/F/5246 - 7 TL/F/5246 - 8 *WE1 e 0V When the Input e WE2 Pulse Generator Characteristics: ZO e 50X, tr e tf e 5 ns FIGURE 1. DP7310/DP8310 FIGURE 2. DP7311/DP8311 5 Typical Applications DP8310/11 Buffering High Current Device (Notes 1 and 2) PNP High Current Driver NPN High Current Driver TL/F/5246 - 10 TL/F/5246-9 VMOS High Current Driver Circuit Used to Reduce Peak Transient Lamp Current RB e # V JR 6.3 1 # 1 J 18X VB b VL L L b RB e e 95.4 & 100X TL/F/5246-11 TL/F/5246 - 12 Eight Output/Four Output Fiber Optic LED Driver DP8311 Parallel Outputs (200 mA) Drivers* DP8311 100 mA Drivers TL/F/5246-13 *Parallel only adjacent outputs TL/F/5246 - 14 6 Typical Applications (Continued) 8-Bit Level Translator-Driver Digital Controlled 256 Level Power Supply from 1.2V to 30V TL/F/5246 - 15 TL/F/5246 - 16 200 mA Drive for a 4 Phase Bifilar Stepper Motor Reading the State of the Latched Peripherals *High Level Input Voltage must not Exceed VCC of the DM81LS96 *Parallel only adjacent outputs TL/F/5246 - 17 TL/F/5246 - 18 Note 1: Always use good VCC bypass and ground techniques to suppress transients caused by peripheral loads. Note 2: Printed circuit board mounting is required if these devices are operated at maximum rated temperature and current (all outputs on DC). 7 8 Physical Dimensions inches (millimeters) Ceramic Dual-In-Line Package (J) Order Number DP7310J or DP7311J NS Package Number J20A 9 DP7310/DP8310/DP7311/DP8311 Octal Latched Peripheral Drivers Physical Dimensions inches (millimeters) (Continued) Molded Dual-In-Line Package (N) Order Number DP8310N or DP8311N NS Package Number N20A LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.