SCD8533 Rev A
FEATURES
❑
32-channels provided by two independent 16-channel multiplexers
❑
Radiation performance
- Total dose: 150 krads(Si), Dose rate = 50 - 300 rads(Si)/s
- SEU: Immune up to 90 MeV-cm2/mg
- SEL: Immune by process design
❑
Full military temperature range
❑
Low power consumption < 30mW
❑
Separate address bus and enable line for CH
0-15
and CH
16-31
❑
Fast access time < 500ns typical
❑
All channel inputs protected by ±20V nominal Transorbs
❑
Input over voltage protection (power on or off)
❑
Break-Before-Make switching
❑
High analog input impedance (power on or off )
❑
Designed for aerospace and high reliability space applications
❑
Packaging – Hermetic ceramic
- 56 leads, 0.80"Sq x 0.20"Ht quad flat pack
- Typical Weight 6 grams
❑
DSCC SMD 5962-09232 pending
MUX8533 Dual 16-Channel Analog Multiplexer Module
Radiation Tolerant & ESD Protected
GENERAL DESCRIPTION
Aeroflex’s MUX8533 is a radiation tolerant, Dual 16 channel multiplexer MCM (Multi Chip Module) with
electrostatic discharge (ESD) protection on all channel inputs.
The MUX8533 has been specifically designed to meet exposure to radiation environments. It is available
in a 56 lead High Temperature Co-Fired Ceramic (HTCC) Quad Flatpack (CQFP). It is guaranteed
operational from -55°C to +125°C. Available screened in accordance with MIL-PRF-38534, the
MUX8533 is ideal for demanding military and space applications.
ORGANIZATION AND APPLICATION
The MUX8533 consists of two separate and independent 16 channel multiplexers arranged as shown in the
block diagram.
A Section
Sixteen (16) channels addressable by bus A0~A3, enabled by EN
0-15
and outputted on Output1 (
0-15).
B Section
Sixteen (16) channels addressable by bus B0~B3, enabled by EN
16-31
and outputted on Output2 (
16-31).
Standard Products
April 20, 2009
Note: Aeroflex Plainview does not currently have a DSCC certified Radiation Hardened Assurance Program.
www.aeroflex.com/mux
2
SCD8533 Rev A 4/20/09 Aeroflex Plainview
MUX8533: DUAL 16 CHANNEL ANALOG MUX BLOCK DIAGRAM
CH 0
CH 15
•
•
•
EN 0-15
OUTPUT2 (16-31)
B0
B1
B2
B3
OUTPUT1 (0-15)
MUX 1
MUX 2
16
CH 16
CH 31
•
•
•
16
EN 16-31
A0
A1
A2
A3
SECTION A
SECTION B
16
VR
16
VR
-V
EE
V
REF
GND
+V
EE
3
SCD8533 Rev A 4/20/09 Aeroflex Plainview
ABSOLUTE MAXIMUM RATINGS
1/
Parameter Range Units
Case Operating Temperature Range -55 to +125 °C
Storage Temperature Range -65 to +150 °C
Supply Voltage
+V
EE
(Pin 18)
-V
EE
(Pin 46)
V
REF
(Pin 39)
+20
-20
+7.5
V
V
V
Digital Input Overvoltage
V
EN
0-15
(Pin 13), V
EN
16-31
(Pin 44), V
A
(Pins 14, 15, 16, 17), V
B
(Pins 40, 41, 42, 43) < V
REF
+.5
> GND -.5 V
V
Analog Input Over Voltage
V
S
±18V V
Notes:
1/ All measurements are made with respect to ground.
NOTICE: Stresses above those listed under "Absolute Maximums Rating" may cause permanent damage to the device. These are stress rating
only; functional operation beyond the "Operation Conditions" is not recommended and extended exposure beyond the "Operation Conditions" may
affect device reliability.
RECOMMENDED OPERATING CONDITIONS
1/
Symbol Parameter Typical Units
+V
EE
+15V Power Supply Voltage +15.0 V
-V
EE
-15V Power Supply Voltage -15.0 V
V
REF
Reference Voltage +5.00 V
V
AL
Logic Low Level +0.8 V
V
AH
Logic High Level +4.0 V
1/ Power Supply turn-on sequence shall be as follows: -V
EE
, V
REF
, followed by +V
EE
.
DC ELECTRICAL PERFORMANCE CHARACTERISTICS
1/
(T
C
= -55°C
TO
+125°C, -V
EE
= -15V, V
REF
= +5.0V, +V
EE
= +15V - U
NLESS
OTHERWISE
SPECIFIED
)
Parameter Symbol Conditions Min Max Units
Supply Current +I
EE
V
EN
(0-15) = V
EN
(16-31) = V
A
(0-3) = V
B
(0-3) = 0
0 1
mA
-I
EE
V
EN
(0-15) = V
EN
(16-31) = V
A
(0-3) = V
B
(0-3) = 0
-1 0
mA
+I
SBY
V
EN
(0-15) = V
EN
(16-31) = 4V, V
A
(0-3) = V
B
(0-3) = 0 7/
0 1
mA
-I
SBY
V
EN
(0-15) = V
EN
(16-31) = 4V, V
A
(0-3) = V
B
(0-3) = 0 7/
-1 0
mA
Address Input Current I
AL
(0-3)
A
V
A
= 0V
-1 1
µA
I
AH
(0-3)
A
V
A
= 5V
-1 1
µA
I
AL
(0-3)
B
V
B
= 0V
-1 1
µA
I
AH
(0-3)
B
V
B
= 5V
-1 1
µA
Enable Input Current I
ENL
(0-15) V
EN
(0-15) = 0V
-1 1
µA
I
ENH
(0-15) V
EN
(0-15) = 5V
-1 1
µA
I
ENL
(16-31) V
EN
(16-31) = 0V
-1 1
µA
I
ENH
(16-31) V
EN
(16-31) = 5V
-1 1
µA
4
SCD8533 Rev A 4/20/09 Aeroflex Plainview
Positive Input Leakage
Current CH0-CH31 +I
SOFFOUTPUT
(
ALL
)V
IN
= +10V, V
EN
= 4V, output and all unused MUX inputs
under test = -10V 2/, 3/ -100 +1000 nA
Negative Input Leakage
Current CH0-CH31 -I
SOFFOUTPUT
(
ALL
)V
IN
= -10V, V
EN
= 4V, output and all unused MUX inputs
under test = +10V 2/, 3/ -100 +1000 nA
Positive Output
Leakage Current
OUTPUTS (pins 12,45) +I
DOFFOUTPUT
(
ALL
)V
OUT
= +10V, V
EN
= 4V, output and all unused MUX
inputs under test = -10V 3/, 4/ -100 +100 nA
Negative Output
Leakage Current
OUTPUTS (pins 12,45) -I
DOFFOUTPUT
(
ALL
)V
OUT
= -10V, V
EN
= 4V, output and all unused MUX
inputs under test = +10V 3/, 4/ -100 +100 nA
Input Clamped Voltage
CH0 - CH31 +V
CLMP
V
EN
= 4V, all unused MUX inputs under test
are open. 3/
+25°C
+125°C
-55°C
18.0
18.0
17.5
23.0
23.5
22.5
V
V
V
Input Clamped Voltage
CH0 - CH31 -V
CLMP
+25°C
+125°C
-55°C
-23.0
-23.5
-22.5
-18.0
-18.0
-17.5
V
V
V
Switch ON Resistance
OUTPUTS
(pins 12,45) 6/
R
DS
(
ON
)(0-31)
A
V
IN
= +15V, V
EN
= 0.8V, I
OUT
= -1mA 2/, 3/, 5/ 200 1000
Ω
R
DS
(
ON
)(0-31)
B
V
IN
= +5V, V
EN
= 0.8V, I
OUT
= -1mA 2/, 3/, 5/ 200 1500
Ω
R
DS
(
ON
)(0-31)
C
V
IN
= -5V, V
EN
= 0.8V, I
OUT
= +1mA 2/, 3/, 5/ 200 2500
Ω
Notes:
1/ Measure inputs sequentially. Ground all unused inputs of the device under test. V
A
is the applied input voltage to the address lines A(0-3). V
B
is
the applied input voltage to the address lines B(0-3)
2/ V
IN
is the applied input voltage to the input channels CH0-CH31.
3/ V
EN
is the applied input voltage to the enable line EN (0-15) and EN (16-31).
4/ V
OUT
is the applied input voltage to the output lines OUTPUT1 (0-15), OUTPUT2 (16-31)
5/ Negative current is the current flowing out of each of the MUX pins. Positive current is the current flowing into each MUX pin.
6/ The MUX8533 cannot be operated with analog inputs from -15 to -5 volts.
7/ Not tested, guaranteed to the specified limits.
SWITCHING CHARACTERISTICS
(T
C
= -55°C
TO
+125°C, -V
EE
= -15V, V
REF
= +5.0V, +V
EE
= +15V -- U
NLESS
OTHERWISE
SPECIFIED
)
Parameter
Symbol Conditions Min Max Units
Switching Test MUX tAHL
R
L
= 10K
Ω
, C
L
= 50pF 10 1000 ns
tALH 10 1000 ns
t
ON
EN
R
L
= 1K
Ω
, C
L
= 50pF
10 1000 ns
t
OFF
EN 10 1000 ns
DC ELECTRICAL PERFORMANCE CHARACTERISTICS
1/
(continued)
(T
C
= -55°C
TO
+125°C, -V
EE
= -15V, V
REF
= +5.0V, +V
EE
= +15V - U
NLESS
OTHERWISE
SPECIFIED
)
Parameter Symbol Conditions Min Max Units
5
SCD8533 Rev A 4/20/09 Aeroflex Plainview
16
TRUTH TABLE (CH0 – CH15)
A3 A2 A1 A0 EN (0-15) "ON" CHANNEL, 1/ (OUTPUT 1)
X X X X H NONE
L L L L L CH0
L L L H L CH1
L L H L L CH2
L L H H L CH3
L H L L L CH4
L H L H L CH5
L H H L L CH6
L H H H L CH7
H L L L L CH8
H L L H L CH9
H L H L L CH10
H L H H L CH11
H H L L L CH12
H H L H L CH13
H H H L L CH14
H H H H L CH15
1/ Between CH0-15 and OUTPUT1 (0-15)
TRUTH TABLE (CH16 – CH31)
B3 B2 B1 B0 EN (16-31) "ON" CHANNEL, 1/ (OUTPUT 2)
X X X X H NONE
L L L L L CH16
L L L H L CH17
L L H L L CH18
L L H H L CH19
L H L L L CH20
L H L H L CH21
L H H L L CH22
L H H H L CH23
H L L L L CH24
H L L H L CH25
H L H L L CH26
H L H H L CH27
H H L L L CH28
H H L H L CH29
H H H L L CH30
H H H H L CH31
1/ Between CH16-31 and OUTPUT2 (16-31)
6
SCD8533 Rev A 4/20/09 Aeroflex Plainview
MUX8533 SWITCHING DIAGRAMS
4.0V
50%
~3V to 12.5V
50%
0V
t
OFF
ENt
ON
EN
Definition of t
ON
EN
and t
OFF
EN
0.8V
0V
0V
50%
50%
4.0V
0.8V
50%
11.6V MIN
11.6V MIN
4.0V
Address Lines
t
A
HL
50%
NOTE: f = 10KHz, Duty cycle = 50%.
(A0 - A3/B0 - B3)
MUX Output
MUX Output
MUX Output
Address Lines
(A0 - A3/B0 - B3)
EN
Lines
t
A
LH
Definition of t
A
HL
Definition of t
A
LH
0.8V
7
SCD8533 Rev A 4/20/09 Aeroflex Plainview
Notes:
1. It is recommended that all "NC" or "no connect pin", be grounded. This eliminates or minimizes any ESD or static buildup.
2. Package lid is internally connected to circuit ground (Pins 7, 8, 11, 21, 22, 35, 36, 49, 50).
PIN NUMBERS & FUNCTIONS
MUX8533 – 56 Leads Ceramic QUAD Flat Pack
Pin # Function Pin # Function
1CH0 29 CH31
2CH1 30 CH30
3CH2 31 CH29
4CH3 32 CH28
5CH4 33 CH27
6CH5 34 CH26
7GND 35 GND
8GND 36 GND
9CH6 37 CH25
10 CH7 38 CH24
11 CASE GND 39 V
REF
12 OUTPUT1 (0-15) 40 B3
13 EN 0-15 41 B2
14 A0 42 B1
15 A1 43 B0
16 A2 44 EN 16-31
17 A3 45 OUTPUT2 (16-31)
18 +V
EE
46 -V
EE
19 CH15 47 CH16
20 CH14 48 CH17
21 GND 49 GND
22 GND 50 GND
23 CH13 51 CH18
24 CH12 52 CH19
25 CH11 53 CH20
26 CH10 54 CH21
27 CH9 55 CH22
28 CH8 56 CH23
SCD8533 Rev A 4/20/09
8
PLAINVIEW, NEW YORK
Toll Free: 800-THE-1553
Fax: 516-694-6715
SE AND MID-ATLANTIC
Tel: 321-951-4164
Fax: 321-951-4254
INTERNATIONAL
Tel: 805-778-9229
Fax: 805-778-1980
WEST COAST
Tel: 949-362-2260
Fax: 949-362-2266
NORTHEAST
Tel: 603-888-3975
Fax: 603-888-4585
CENTRAL
Tel: 719-594-8017
Fax: 719-594-8468
w w w . a e r o f l e x . c o m i n f o - a m s @ a e r o f l e x . c o m
Aeroflex Microelectronic Solutions reserves the right to
change at any time without notice the specifications, design,
function, or form of its products described herein. All
parameters must be validated for each customer's application
by engineering. No liability is assumed as a result of use of
this product. No patent licenses are implied.
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused
EXPORT CONTROL: EXPORT WARNING:
This product is controlled for export under the International Traffic in
Arms Regulations (ITAR). A license from the U.S. Department of
State is required prior to the export of this product from the United
States.
Aeroflex’s military and space products are controlled for export under
the International Traffic in Arms Regulations (ITAR) and may not be
sold or proposed or offered for sale to certain countries. (See ITAR
126.1 for complete information.)
PACKAGE OUTLINE
V
Note: Outside ceramic tie bars
not shown for clarity. Contact
factory for details.
ORDERING INFORMATION
Model DSCC SMD # Screening Package
MUX8533-S
-
Military Temperature, -55°C to +125°C
Screened in accordance with MIL-PRF-38534, Class K QUAD Flat
Pack
MUX8533-7
-
Commercial Flow, +25°C testing only
MUX8533-201-1S 5962-0923202KXC
(Pending) In accordance with DSCC SMD
0.800 SQ
Pin 50
Pin 7
Pin 35Pin 22
Pin 8
Pin 21
Pin 36
Pin 49
Pin 1
(13 Spaces at .050)
Tol Non-Cum
4 Sides
.0165
±.003
0.650 ±.005
.200
MAX
(.650)
.006
±.002
±.010
