0 Items Sign In
SHOP BLOG LEARN FORUMS VIDEOS
COMPONENTS & PARTS / HEAT SINKS / MINI ALUMINUM HEAT SINK FOR RASPBERRY PI - 13 X 13 X 3MM
DESCRIPTION
Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim
13x13x3mm Heat Sink!
This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi
but is best paired with a Raspberry Pi 3 since it can run a little hot. It comes with thermal
adhesive already applied to the back making installation super easy. Clean the surface of the
chip of any dust or grease then peel off the protective film and press the heat sink firmly onto
the chip. You can use this heatsink with any of our injection molded Adafruit Pi Enclosures, but it
1
ADD TO CART
Mini Aluminum Heat
Sink for Raspberry Pi -
13 x 13 x 3mm
PRODUCT ID: 3084
IN STOCK
1-9
10-99
100+
ADD TO WISHLIST
DESCRIPTION
TECHNICAL DETAILS
may not work with other enclosures and some HATs may not fit on top with the heat sink
installed.
We don't have formal specs for this heat sink, but when we ran 'stress -c 4' on the Pi 3 to run all
4 CPUs, a heat-sink-less Pi quickly dropped down to 0.96 GHz to maintain thermal equilibrium.
With this heat sink installed, it could run at 1.02 GHz (so, 6% higher performance). It's a very
minimal heatsink!
Note that you do not
need
a heatsink for the Pi 3, it will automatically adjust its speed to avoid
overheating! It can also, of course, be used for other processors and chips.
TECHNICAL DETAILS
Product Dimensions: 13.0mm x 13.0mm x 3.3mm / 0.5" x 0.5" x 0.1"
Product Weight: 0.7g / 0.0oz
MAY WE ALSO SUGGEST...
TO-220 Clip-On Heatsink
Aluminum Heat Sink for
Raspberry Pi 3 - 14 x 14 x
Aluminum SMT Heat Sink -
0.27"x0.27" square
Aluminum SMT Heat Sinks
10 Pack - 0.25"x0.25" x 0.15"
Raspberry Pi 3 - Model B -
ARMv8 with 1G RAM
Aluminum SMT Heat Sink -
0.26"x0.26" square - 0.39"
Aluminum SMT Heat Sink -
0.5"x0.5" square
Heat Sink Thermal Tape -
3M 8810 - 80mm x 80mm
Aluminum Heat Sink for
Raspberry Pi 3 - 15 x 15 x
Aluminum SMT Heat Sink -
0.4"x0.4" square
Heat Sink Thermal Tape -
3M 8810 - 25mm x 25mm
Miniature 5V Cooling Fan
for Raspberry Pi (and Other
