NL17SZ125 Non-Inverting 3-State Buffer The NL17SZ125 is a high performance non-inverting buffer operating from a 1.65 V to 5.5 V supply. Features * * * * * * * * * http://onsemi.com MARKING DIAGRAMS M * * * Extremely High Speed: tPD 2.6 ns (typical) at VCC = 5.0 V Designed for 1.65 V to 5.5 V VCC Operation Overvoltage Tolerant Inputs and Outputs LVTTL Compatible - Interface Capability With 5.0 V TTL Logic with VCC = 3.0 V LVCMOS Compatible 24 mA Balanced Output Sink and Source Capability Near Zero Static Supply Current Substantially Reduces System Power Requirements 3-State OE Input is Active-Low Replacement for NC7SZ125 Chip Complexity = 36 FETs These Devices are Pb-Free and are RoHS Compliant NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q100 Qualified and PPAP Capable SC-88A (SOT-353) DF SUFFIX CASE 419A M0 MG G SOT-553 XV5 SUFFIX CASE 463B 5 5 1 M0 MG G TSOP-5 DT SUFFIX CASE 483 1 IN A 2 GND 3 VCC 5 UDFN6 1.0 x 1.0 CASE 517BX 4 OUT Y M0 M G Figure 1. Pinout (Top View) OE M 1 = Specific Device Code = Date Code = Pb-Free Package (*Note: Microdot may be in either location) *Date Code orientation and/or position may vary depending upon manufacturing location. EN OUT Y IN A FUNCTION TABLE Figure 2. Logic Symbol OE Input A Input Y Output PIN ASSIGNMENT L L H L H X L H Z 1 OE 2 IN A 3 GND 4 OUT Y 5 VCC (c) Semiconductor Components Industries, LLC, 2012 May, 2012 - Rev. 13 1 Y OE M0 M G G X = Don't Care ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. 1 Publication Order Number: NL17SZ125/D NL17SZ125 MAXIMUM RATINGS Symbol Value Units VCC DC Supply Voltage -0.5 to +7.0 V VIN DC Input Voltage -0.5 to +7.0 V DC Output Voltage -0.5 to +7.0 V VOUT Parameter IIK DC Input Diode Current -50 mA IOK DC Output Diode Current -50 mA IOUT DC Output Sink Current 50 mA ICC DC Supply Current per Supply Pin 100 mA -65 to +150 C 260 C +150 C TSTG Storage Temperature Range TL Lead Temperature, 1 mm from Case for 10 Seconds TJ Junction Temperature Under Bias qJA Thermal Resistance (Note 1) SC-88A/SOT-553 TSOP-5 350 230 PD Power Dissipation in Still Air at 85C 150 MSL FR VESD Moisture Sensitivity C/W mW Level 1 Flammability Rating Oxygen Index: 28 to 34 UL 94 V-0 @ 0.125 in ESD Withstand Voltage Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) V u2000 u200 N/A Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm-by-1 inch, 2 ounce copper trace with no air flow. 2. Tested to EIA/JESD22-A114-A. 3. Tested to EIA/JESD22-A115-A. 4. Tested to JESD22-C101-A. RECOMMENDED OPERATING CONDITIONS Symbol Parameter VCC DC Supply Voltage VIN DC Input Voltage VOUT DC Output Voltage TA Operating Temperature Range tr, tf Input Rise and Fall Time VCC = 1.8 V 0.15 V VCC = 2.5 V 0.2 V VCC = 3.0 V 0.3 V VCC = 5.0 V 0.5 V http://onsemi.com 2 Min Max Units 1.65 5.5 V 0 5.5 V 0 5.5 V -55 +125 C 0 0 0 0 20 20 10 5.0 ns/V NL17SZ125 47.9 100 178,700 20.4 110 79,600 9.4 120 37,000 4.2 130 17,800 2.0 140 8,900 1.0 TJ = 80C 117.8 419,300 TJ = 90C 1,032,200 90 TJ = 100C 80 TJ = 110C Time, Years TJ = 120C Time, Hours FAILURE RATE OF PLASTIC = CERAMIC UNTIL INTERMETALLICS OCCUR TJ = 130C Junction Temperature C NORMALIZED FAILURE RATE DEVICE JUNCTION TEMPERATURE VERSUS TIME TO 0.1% BOND FAILURES 1 1 10 100 1000 TIME, YEARS Figure 3. Failure Rate vs. Time Junction Temperature DC ELECTRICAL CHARACTERISTICS Symbol Parameter Min 0.75 VCC 0.7 VCC VIH High-Level Input Voltage 1.65 to 1.95 2.3 to 5.5 VIL Low-Level Input Voltage 1.65 to 1.95 2.3 to 5.5 VOH High-Level Output Voltage VIN = VIH VOL Low-Level Output Voltage VIN = VIL IIN Input Leakage Current IOZ 3-State Output Leakage IOFF Power Off Leakage Current ICC Quiescent Supply Current TA = 255C VCC (V) Typ -555C 3 TA 3 1255C Max Min Max 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC Units Condition V 0.25 VCC 0.3 VCC V 1.65 1.8 2.3 3.0 4.5 1.55 1.7 2.2 2.9 4.4 1.65 1.8 2.3 3.0 4.5 1.55 1.7 2.2 2.9 4.4 V IOH = -100 mA 1.65 2.3 3.0 3.0 4.5 1.29 1.9 2.4 2.3 3.8 1.52 2.15 2.80 2.68 4.20 1.29 1.9 2.4 2.3 3.8 V IOH = -4 mA IOH = -8 mA IOH = -16 mA IOH = -24 mA IOH = -32 mA 1.65 1.8 2.3 3.0 4.5 0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 V IOL = 100 mA 1.65 2.3 3.0 3.0 4.5 0.08 0.10 0.15 0.22 0.22 0.24 0.30 0.40 0.55 0.55 0.24 0.30 0.40 0.55 0.55 V IOL = 4 mA IOL = 8 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA 0 to 5.5 0.1 1.0 mA VIN = 5.5 V or GND 1.65 to 5.5 0.5 5.0 mA VIN = VIH or VIL 0 V VOUT 5.5 V 0 1.0 10 mA VIN = 5.5 V or VOUT = 5.5 V 5.5 1.0 10 mA VIN = 5.5 V or GND http://onsemi.com 3 NL17SZ125 AC ELECTRICAL CHARACTERISTICS (tR = tF = 3.0 ns) Symbol tPLH tPHL tPZH tPZL tPHZ tPLZ Parameter Condition Propagation Delay AN to YN (Figures 4 and 5, Table 1) Output Enable Time (Figures 6, 7and 8, Table 1) Output Disable Time (Figures 6, 7and 8, Table 1) TA = 255C -555C 3 TA 3 1255C VCC (V) Min Typ Max Min Max Units 9.0 10 2.0 10.5 ns RL = 1 MW CL = 15 pF 1.8 0.15 2.0 RL = 1 MW CL = 15 pF 2.5 0.2 1.0 7.5 1.0 8.0 RL = 1 MW RL = 500 W CL = 15 pF CL = 50 pF 3.3 0.3 0.8 1.2 5.2 5.7 0.8 1.2 5.5 6.0 RL = 1 MW RL = 500 W CL = 15 pF CL = 50 pF 5.0 0.5 0.5 0.8 4.5 5.0 0.5 0.8 4.8 5.3 RL = 250 W CL = 50 pF 1.8 0.15 2.0 9.5 2.0 10 2.5 0.2 1.8 8.5 1.8 9.0 3.3 0.3 1.2 6.2 1.2 6.5 5.0 0.5 0.8 5.5 0.8 5.8 1.8 0.15 2.0 10 2.0 10.5 2.5 0.2 1.5 8.0 1.5 8.5 3.3 0.3 0.8 5.7 0.8 6.0 5.0 0.5 0.3 4.7 0.3 5.0 RL and R1= 500 WCL = 50 pF 7.6 8.0 ns ns CAPACITIVE CHARACTERISTICS Symbol CIN Parameter Condition Typical Units Input Capacitance VCC = 5.5 V, VI = 0 V or VCC 2.5 pF COUT Output Capacitance VCC = 5.5 V, VI = 0 V or VCC 2.5 pF CPD Power Dissipation Capacitance (Note 5) 10 MHz, VCC = 3.3 V, VI = 0 V or VCC 10 MHz, VCC = 5.5 V, VI = 0 V or VCC 9 11 pF 5. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no-load dynamic power consumption; PD = CPD VCC2 fin + ICC VCC. http://onsemi.com 4 NL17SZ125 OE = GND VCC INPUT 50% A tPHL tPLH OUTPUT GND CL* RL 50% VCC Y Figure 4. Switching Waveform *Includes all probe and jig capacitance. A 1 MHz square input wave is recommended for propagation delay tests. Figure 5. tPLH or tPHL 2 INPUT VCC R1 = 500 W INPUT VCC OUTPUT CL = 50 pF OUTPUT CL = 50 pF RL = 500 W RL = 250 W A 1 MHz square input wave is recommended for propagation delay tests. A 1 MHz square input wave is recommended for propagation delay tests. Figure 6. tPZL or tPLZ Figure 7. tPZH or tPHZ 2.7 V Vmi OE Vmi 0V tPZH tPHZ VCC VOH - 0.3 V Vmo On 0V tPZL tPLZ 3.0 V Vmo On VOL + 0.3 V GND Figure 8. AC Output Enable and Disable Waveform Table 1. OUTPUT ENABLE AND DISABLE TIMES tR = tF = 2.5 ns, 10% to 90%; f = 1 MHz; tW = 500 ns VCC Symbol 3.3 V + 0.3 V 2.7 V 2.5 V + 0.2 V Vmi 1.5 V 1.5 V VCC/2 Vmo 1.5 V 1.5 V VCC/2 http://onsemi.com 5 NL17SZ125 DEVICE ORDERING INFORMATION Package Shipping NL17SZ125DFT2G SC-88A (SOT-353) (Pb-Free) 3000 / Tape & Reel NLV17SZ125DFT2G* SC-88A (SOT-353) (Pb-Free) 3000 / Tape & Reel NL17SZ125XV5T2G SOT-553 (Pb-Free) 4000 / Tape & Reel NL17SZ125DTT1G TSOP-5 (Pb-Free) 3000 / Tape & Reel UDFN6, 1.0 x 1.0 x 0.35P (Pb-Free) 3000 / Tape & Reel Device NL17SZ125CMUTCG For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q100 Qualified and PPAP Capable. http://onsemi.com 6 NL17SZ125 PACKAGE DIMENSIONS SC-88A (SC-70-5/SOT-353) CASE 419A-02 ISSUE K A G 5 4 -B- S 1 2 DIM A B C D G H J K N S 3 D 5 PL 0.2 (0.008) B M NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419A-01 OBSOLETE. NEW STANDARD 419A-02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. M N INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC --0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 J C K H SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 7 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC --0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 NL17SZ125 PACKAGE DIMENSIONS SOT-553, 5 LEAD CASE 463B ISSUE B D -X- 5 A 4 1 e 2 3 E -Y- NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. L HE b 5 PL 0.08 (0.003) c M MILLIMETERS NOM MAX 0.55 0.60 0.22 0.27 0.13 0.18 1.60 1.70 1.20 1.30 0.50 BSC 0.10 0.20 0.30 1.50 1.60 1.70 DIM A b c D E e L HE X Y MIN 0.50 0.17 0.08 1.50 1.10 SOLDERING FOOTPRINT* 0.3 0.0118 0.45 0.0177 1.35 0.0531 1.0 0.0394 0.5 0.5 0.0197 0.0197 SCALE 20:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 8 INCHES NOM 0.022 0.009 0.005 0.063 0.047 0.020 BSC 0.004 0.008 0.059 0.063 MIN 0.020 0.007 0.003 0.059 0.043 MAX 0.024 0.011 0.007 0.067 0.051 0.012 0.067 NL17SZ125 PACKAGE DIMENSIONS TSOP-5 CASE 483-02 ISSUE H D 5X NOTE 5 2X 0.10 T 2X 0.20 T NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 5. OPTIONAL CONSTRUCTION: AN ADDITIONAL TRIMMED LEAD IS ALLOWED IN THIS LOCATION. TRIMMED LEAD NOT TO EXTEND MORE THAN 0.2 FROM BODY. 0.20 C A B M 5 1 4 2 L 3 B S K DETAIL Z G A DIM A B C D G H J K L M S DETAIL Z J C 0.05 SEATING PLANE H T SOLDERING FOOTPRINT* 0.95 0.037 MILLIMETERS MIN MAX 3.00 BSC 1.50 BSC 0.90 1.10 0.25 0.50 0.95 BSC 0.01 0.10 0.10 0.26 0.20 0.60 1.25 1.55 0_ 10 _ 2.50 3.00 1.9 0.074 2.4 0.094 1.0 0.039 0.7 0.028 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 9 NL17SZ125 PACKAGE DIMENSIONS UDFN6, 1x1, 0.35P CASE 517BX ISSUE O PIN ONE REFERENCE 2X 0.08 C 2X EEE EEE 0.08 C 0.05 C L1 A B D L NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.20 MM FROM TERMINAL TIP. 4. PACKAGE DIMENSIONS EXCLUSIVE OF BURRS AND MOLD FLASH. L3 E DETAIL A ALTERNATE TERMINAL CONSTRUCTION EE CC EE CC TOP VIEW EXPOSED Cu DETAIL B A3 A1 MOLD CMPD DETAIL B A ALTERNATE CONSTRUCTION 0.05 C SIDE VIEW C SEATING PLANE 3 1 6X MILLIMETERS MIN MAX 0.50 0.65 0.00 0.05 0.13 REF 0.17 0.23 1.00 BSC 1.00 BSC 0.35 0.20 0.40 --- 0.15 0.26 0.33 RECOMMENDED SOLDERING FOOTPRINT* e DETAIL A DIM A A1 A3 b D E e L L1 L3 L 6X 6X 0.25 0.52 1.20 6 4 BOTTOM VIEW 6X PACKAGE OUTLINE b 0.07 M C A B 0.05 M C 1 0.35 PITCH NOTE 3 DIMENSION: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 10 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NL17SZ125/D