! Economical cost, prompt delivery!
! Wide varieties of values
! Choice of 5 or 10 equally spaced taps
! TTL and DTL compatible
! Operating temperature: 0°C to 70°C
! Excellent for applications requiring high
delay stability, fast rise times and no jitter,
such as memory boards, disk drives, and
signal processing
FEATURES
ACTIVE (DIGITAL) DELAY LINES
! Non-standard delay times or tolerances
! Non-symmetrical tap delays
! Dynamic RAM timing delay
! Fast logic TTL available
! Faster rise times
! ECL, H-CMOS, and low power designs
available
! Option T - Measurement at both leading
and trailing edges
! Option ER - Ceramic IC’s screened to MIL-
STD-883, -55 to +125°C per MIL-D-83532
! Option 39 - -40-+85°C op. temp.
OPTIONS
Wide selection of sizes!
RCD’s digital delay lines have been designed to provide precise tap
delays with all the necessary drive and pick-off circuitry. All inputs and
outputs are schottky-type and require no additional components to achieve
specified delays. Encapsulated/molded construction ensures full com-
pliance to all applicable requirements of MIL-D-23859. Units are 100%
inspected for solder joint integrity and electrical conformance.
A0805 SERIES 5-TAP 8-PIN DIP
SA0805 SERIES 5-TAP 8-PIN SIP
A1405 SERIES 5-TAP 8-PIN DIP
A1410 SERIES 10-TAP 14-PIN DIP
ELECTRICAL CHARACTERISTICS
TEST CONDITIONS @25°C
1) Delay measured at 1.5V on leading edge only with no loads on output.
2) Rise time measured from 0.75V to 2.4V.
3) Delay will inversely vary approximately 4% for every 5% change in supply voltage.
4) Supply voltage (VCC) = 5.0±.25VDC
5) Input test pulse: 3.2V, 2nS rise time, width>40% of total delay, pulse period to be a
minimum of 3x the pulse width.
* Consult factory for availability.
FA specifications subject to change without notice
RCD Components Inc., 520 E. Industrial Park Dr ., Manchester, NH, USA 03109
Tel: (603) 669-0054 Fax:(603) 669-5455 E-mail: sales@rcdcomponents.com www.rcdcomponents.com
RESISTORS
""
""
"CAP
S
&
C
OILS
""
""
"DELAY
LINES
P/N DESIGNA TION:
RCD T ype
Options: (leave blank if standard)
ER, T, 39, or as assigned by RCD
T otal Delay
Packaging: B=bulk (standard)
A1405 - 100nS - B
TYPE A0805 (Available
20nS to 500nS) ← →
.500 [12.7]
Max. ↑
↓
.400
[10.2]
Max.
.300
[7.62]
← →
.300
[7.62]
↑
↓
VCC
G
IN 1
8
4
5
Outputs
7 2 6 3
R
→ ←→ ←
→ ←→ ←
→ ←
.018
[.457]
Typ.
.100
[2.54]
Typ.
→ ← → ←
→ ← → ←
→ ←
.250
[6.35]
Max.
↑
↓
TYPE SA0805 (Available 20nS to 250nS)
.340
[8.64]
Max.
.150
[3.81]
Typ.
←.810 [20.6] Max.→
→ ←→ ←
→ ←→ ←
→ ← .100
[2.54]
Typ.
→ ← → ←
→ ← → ←
→ ←
.020
[.51]
.018
[.457]
Typ.
.010
[.254]
VCC
G
IN 2
1
8
7
R
Outputs
3 4 5 6
→ ←
.180
[4.57]
Max.
→ ← → ←
→ ← → ←
→ ←
7
TYPE A1410
(Available 50nS to 1000nS)
→ ←→ ←
→ ←→ ←
→ ←
.300
[7.62]
Max.
.150
[3.81]
Typ.
.020±.003
[.5±.076]
↑
↓
.100
[2.54]
→ ← → ←
→ ← → ←
→ ←
←.800 [20.3] Max.→
↑
↓
↓
↑
↓
.300±.010
[7.62±.254]
↑
↓
.400 [10.2]
Max.
←.800 [20.3] Max.→
.050 [1.27]
R
IN 1
14 8 OUT
G
VCC
13 3 12 4 11 5 10 6 9
← →
TYPE A1405A
Auto Insertable Molded
(20nS to 1000nS)--
also avail. in .165” profile
←.785 [19.9] Max.→ .25
[6.35]
↓
↑
.600±.010
[12.7±.254]
← →
TYPE A1405 - Economy
(20nS to 1000nS)
12 4 10 6 8 OUT
R
IN 1
14
7
G
VCC
.300±.01
[7.62±.254]
← →
.280
[7.11]
.120
[3.05]
Min. .280
[7.11]
Max.
↓
↑
↓
↑ → ←→ ←
→ ←→ ←
→ ←
.018
[.457]
Typ. .100
[2.54]
Typ.
→ ← → ←
→ ← → ←
→ ←
←.800 [20.3] Max.→
.600±.010
[12.7±.254]
← →
→ →
→ →
→
← →← →
← →← →
← →
.100
[2.54] .300
[7.62] ↓
↑
↓
.300±.010
[7.62±.254]
.050 [1.27]
Typ.
↑
↓
.400
[10.2]
.010
[.254]
↓
↑
latoT yaleD
paTrePyaleD )ceSn( 5080A 080AS 5041A 0141A
0252030405
4
5
6
8
01
*
*
*
*
5
0657 001 521 051
2151025203
65.701 5.21 51
571 002 052 003 053
5304050607
5.71 02520353
004 054 005 057 0001
0809 001 051 002
04540557 001
ecnareloTyaleDlatoT)retaergsirevehcihw(Sn2ro%5±
ecnareloTyaleDpaT)retaergsirevehcihw(Sn2ro%5±
ecnatsiseRnoitalusnI0001MΩ.nim
htgnertScirtceleiDCDV001
emiTesiR.xamSn4