Marketing Bulletin DATE: April 20th, 2010 TO: All Sales Personnel FROM: Isaac Gonzalez RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective April 20th, 2010: Series EC11 Description RoHS Compliant (Pb-free) 5.0V 14 Pin DIP Metal Thru-Hole HCMOS/TTL Oscillator Recommended Replacement EH11 EC11HS RoHS Compliant (Pb-free) 5.0V 8 Pin DIP Metal Thru-Hole HCMOS/TTL Oscillator EH11HS In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after September 1st, 2010, with delivery to conclude by December 1st, 2010. If there are any questions pertaining to this bulletin, please feel free to contact me. Thank you again for your cooperation. Best Regards, Isaac Gonzalez Configuration Manager Ecliptek Corporation 3545 CADILLAC AVENUE * COSTA MESA, CA 92626-1401 * (714) 433-1200 * Fax (714) 433-1234 EC11 Series EC11 * Crystal Clock Oscillators * CMOS/TTL Output * +5.0V Supply Voltage * Tri-State Output Option * Custom Lead Length & Gull Wing Options * 8 pin DIP Metal Package * RoHS Compliant (Pb-free) H 5.6 L 13.2 W 13.2 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range (MHz) 0.250MHz to 106.250MHz Operating Temperature Range 0C to 70C or -40C to 85C Storage Temperature Range -55C to 125C Supply Voltage (VDD) 5.0VDC 10% Input Current Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time 250.000kHz to 24.000MHz 45mA Maximum 24.001MHz to 50.000MHz 55mA Maximum 50.001MHz to 66.667MHz 65mA Maximum 66.668MHz to 106.250MHz 85mA Maximum Inclusive of Operating Temperature Range, Supply Voltage, 100ppm, 50ppm, 25ppm, or and Load 20ppm Max. (0C to 70C Only) w/TTL Load 2.4VDC Minimum w/CMOS Load VDD-0.5VDC Minimum w/TTL Load 0.4VDC Maximum w/CMOS Load 0.5VDC Maximum 0.4VDC to 2.4VDC w/TTL Load; 20% to 80% of 6 nSeconds Maximum Waveform w/CMOS Load Duty Cycle Load Drive Capability Tri-State Input Voltage at 1.4VDC w/TTL Load; at 50% of Waveform w/CMOS Load 50 10(%) (Standard) at 1.4VDC w/TTL Load or w/CMOS Load < 70.000MHz 50 5(%) (Optional) at 50% of Waveform w/TTL Load or w/CMOS Load > 70.000MHz 50 5(%) (Optional) 250.000kHz to 24.000MHz 10TTL Load or 50pF CMOS Load 24.001MHz to 70.000MHz 10TTL Load or 15pF CMOS Load 70.001MHz to 106.250MHz 10LSTTL Load or 15pF CMOS Load VIH :No Connection Enables Output VIH :2.2VDC Enables Output VIL :0.8VDC Disables Output: High Impedance Aging (at 25C) 5ppm / year Maximum Start Up Time 10mSeconds Maximum Period Jitter: Absolute 100pSeconds Maximum Period Jitter: One Sigma 25pSeconds Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR EC11 8 pin DIP 5.0V OS05 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 08/06 Specifications subject to change without notice. PART NUMBERING GUIDE EC11 00 HS ET T TS - 60.000M - G TR FREQUENCY TOLERANCE / STABILITY 00=100ppm Max., 45=50ppm Max. 25=25ppm Max., 20=20ppm Max. PACKAGING OPTIONS Blank=Bulk TR=Tape & Reel (only offered with Half Size G and Half Size G2 Options) PACKAGE HS=Half Size 8 Pin DIP AVAILABLE OPTIONS Blank=None CLXXX=Custom Lead Length G=Half Size Gull Wing G2=Half Size Gull Wing OPERATING TEMP. RANGE Blank=0C to 70C , ET=-40C to 85C DUTY CYCLE Blank=50 10(%) , T=50 5(%) FREQUENCY K=kHz, M=MHz OUTPUT CONTROL FUNCTION Blank=None (No Connection on Pin 1), TS=Tri-State Enable High MECHANICAL DIMENSIONS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1 Locator for Gull Wing (1) For "G" Option (2) For "G2" Option O Pin 1: No Connect or Tri-State Pin 4: Case Ground Pin 5: Output Pin 8: Supply Voltage MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: EC11 TS Output Control Function Blank = None (No Connection on Pin 1) TS = Tri-State Enable High Series Designator 700 Pieces Per Reel Compliant to EIA-481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Line 3: XX.XXX M M=MHz, K=kHz Frequency (5 Digits Maximum + Decimal) Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot Characteristic Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC11 8 pin DIP 5.0V OS05 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.