0.8mm pitch connector For PCB Right-angle through hole type female connector for PCB HDRA-E68W1LFDT-( )+ Right-angle Through hole ANSI/SFF8441 Configuration of product Part No. HDRA- E 68 W 1 LFD T- ( )+ Series name No. of contacts: 136 (682) No. of stacks: 2 Type of contact LFD: Right-angle through hole type, female With location peg Lock screw Blank: None SL : Provided (Thickness of panel: 1.12 mm) 42.7 1.15 1.2 1.15 34.7 1.20.03 0.03 1.15 0.05 5.08 1.2 1.15 5.08 R 2.4 0.08 1.15 5.3 37.7 Components Bracket Contacts 5.84 4.88 0.08 0.03 0.3 2.02 11.84 35 3.5 68 POS.#1 (CN2) 2.08 1 POS.#2 (CN2) 5.84 1 34 3.46 35 68 34 32.35 0.05 6-o1.2 (P.T.H.) Recommended PCB layout t=1.6mm POS.#68 (CN1) 25 2.02 o2.25 PAD Edge of PCB 0.833=26.4 POS.#68 (CN2) 0.1 0.4 0.03 0.8 0.03 0.833=26.4 0.05 32.35 0.1 POS.#68 (CN2) 37.7 31.65 28.3 1.15 1.2 0.03 2.250.05 (Four lock screws are supplied with a connector.) o0.95 POS.#1(CN2) POS.#2(CN2) 6.3MAX POS.#1 (CN1) 1.15 1.6 0.03 POS.#2 (CN1) PAD o10.1 POS.#67(CN1) POS.#68(CN1) 0.05 0.03 JAPAN HONDA POS.#1 (CN1) 0.03 2.78 1.6 136-o0.65 (P.T.H.) 0.03 0.833=26.40.05 0.03 0.03 2.02 2.98 1.15 0.03 Recommended panel cut-out dimensions Insulator Select the connector according to panel thickness. For the application without panel, use washers or special lock screw (P/N: HDRA-E68LFD-7C). Square nuts Shell Lock screw Mating connector: HDRA series IDC type male cable connector, or straddle SMT type male connector Others Wire wrapping Crimping Soldering IDC Press-in SMT Through hole