To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. R1RP0404D Series 4M High Speed SRAM (1-Mword x 4-bit) REJ03C0116-0100Z Rev. 1.00 Mar.12.2004 Description The R1RP0404D is a 4-Mbit high speed static RAM organized 1-Mword x 4-bit. It has realized high speed access time by employing CMOS process (6-transistor memory cell) and high speed circuit designing technology. It is most appropriate for the application which requires high speed and high density memory, such as cache and buffer memory in system. The R1RP0404D is packaged in 400-mil 32-pin SOJ for high density surface mounting. Features * Single 5.0 V supply: 5.0 V 10% * Access time 12 ns (max) * Completely static memory No clock or timing strobe required * Equal access and cycle times * Directly TTL compatible All inputs and outputs * Operating current: 130 mA (max) * TTL standby current: 40 mA (max) * CMOS standby current : 5 mA (max) : 1.0 mA (max) (L-version) * Data retention current: 0.5 mA (max) (L-version) * Data retention voltage: 2.0 V (min) (L-version) * Center VCC and VSS type pin out Rev.1.00, Mar.12.2004, page 1 of 11 R1RP0404D Series Ordering Information Type No. Access time Package R1RP0404DGE-2PR 12 ns 400-mil 32-pin plastic SOJ (32P0K) R1RP0404DGE-2LR 12 ns Pin Arrangement 32-pin SOJ A0 A1 A2 A3 A4 CS# I/O1 VCC VSS I/O2 WE# A5 A6 A7 A8 A9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 A19 A18 A17 A16 A15 OE# I/O4 VSS VCC I/O3 A14 A13 A12 A11 A10 NC (Top view) Pin Description Pin name Function A0 to A19 Address input I/O1 to I/O4 Data input/output CS# Chip select OE# Output enable WE# Write enable VCC Power supply VSS Ground NC No connection Rev.1.00, Mar.12.2004, page 2 of 11 R1RP0404D Series Block Diagram (LSB) A14 A13 A12 A5 A6 A7 A11 A10 A3 A1 (MSB) Internal voltage generator Row decoder 1024-row x 64-column x 16-block x 4-bit (4,194,304 bits) VSS CS Column I/O I/O1 . . . I/O4 Input data control Column decoder A8 A9 A19 A17 A18 A15 A0 A2 A4 A16 (LSB) (MSB) WE# CS# OE# CS Rev.1.00, Mar.12.2004, page 3 of 11 VCC CS R1RP0404D Series Operation Table CS# OE# WE# Mode VCC current I/O Ref. cycle H x x Standby ISB, ISB1 High-Z L H H Output disable ICC High-Z L L H Read ICC DOUT Read cycle (1) to (3) L H L Write ICC DIN Write cycle (1) L L L Write ICC DIN Write cycle (2) Parameter Symbol Value Supply voltage relative to VSS VCC -0.5 to +7.0 Voltage on any pin relative to VSS VT -0.5* to VCC + 0.5* Power dissipation PT 1.0 W Operating temperature Topr 0 to +70 C Storage temperature Tstg -55 to +125 C Storage temperature under bias Tbias -10 to +85 C Note: H: VIH, L: VIL, x: VIH or VIL Absolute Maximum Ratings Unit V 1 2 V Notes: 1. VT (min) = -2.0 V for pulse width (under shoot) 6 ns. 2. VT (max) = VCC + 2.0 V for pulse width (over shoot) 6 ns. Recommended DC Operating Conditions (Ta = 0 to +70C) Parameter Symbol Supply voltage Min Typ Max Unit 3 4.5 5.0 5.5 V 4 0 0 0 VIH 2.2 VCC + 0.5* VIL -0.5* 0.8 VCC* VSS* Input voltage Notes: 1. 2. 3. 4. 1 VIL (min) = -2.0 V for pulse width (under shoot) 6 ns. VIH (max) = VCC + 2.0 V for pulse width (over shoot) 6 ns. The supply voltage with all VCC pins must be on the same level. The supply voltage with all VSS pins must be on the same level. Rev.1.00, Mar.12.2004, page 4 of 11 V 2 V V R1RP0404D Series DC Characteristics (Ta = 0 to +70C, VCC = 5.0 V 10%, VSS = 0 V) Parameter Symbol Min Max Unit Test conditions Input leakage current IILII 2 A VIN = VSS to VCC Output leakage current IILOI 2 A VIN = VSS to VCC Operation power supply current ICC 130 mA Min cycle CS# = VIL, lOUT = 0 mA Other inputs = VIH/VIL Standby power supply current ISB 40 mA Min cycle, CS# = VIH, Other inputs = VIH/VIL ISB1 5 mA f = 0 MHz VCC CS# VCC - 0.2 V, (1) 0 V VIN 0.2 V or (2) VCC VIN VCC - 0.2 V * Output voltage Note: 1 1.0* 1 VOL 0.4 V IOL = 8 mA VOH 2.4 V IOH = -4 mA 1. This characteristics is guaranteed only for L-version. Capacitance (Ta = +25C, f = 1.0 MHz) Parameter Input capacitance* 1 Input/output capacitance* Note: 1 Symbol Min Max Unit Test conditions CIN 6 pF VIN = 0 V CI/O 8 pF VI/O = 0 V 1. This parameter is sampled and not 100% tested. Rev.1.00, Mar.12.2004, page 5 of 11 R1RP0404D Series AC Characteristics (Ta = 0 to +70C, VCC = 5.0 V 10%, unless otherwise noted.) Test Conditions * Input pulse levels: 3.0 V/0.0 V * Input rise and fall time: 3 ns * Input and output timing reference levels: 1.5 V * Output load: See figures (Including scope and jig) 5V 1.5 V 480 RL = 50 DOUT Zo = 50 DOUT 255 30 pF 5 pF Output load (B) (for tCLZ, tOLZ, tCHZ, tOHZ, tWHZ, and tOW) Output load (A) Read Cycle R1RP0404D -2 Parameter Symbol Min Max Unit Read cycle time tRC 12 ns Address access time tAA 12 ns Chip select access time tACS 12 ns Output enable to output valid tOE 6 ns Output hold from address change tOH 3 ns Chip select to output in low-Z tCLZ 3 ns 1 Output enable to output in low-Z tOLZ 0 ns 1 Chip deselect to output in high-Z tCHZ 6 ns 1 Output disable to output in high-Z tOHZ 6 ns 1 Rev.1.00, Mar.12.2004, page 6 of 11 Notes R1RP0404D Series Write Cycle R1RP0404D -2 Parameter Symbol Min Max Unit Notes Write cycle time tWC 12 ns Address valid to end of write tAW 8 ns Chip select to end of write tCW 8 ns 9 Write pulse width tWP 8 ns 8 Address setup time tAS 0 ns 6 Write recovery time tWR 0 ns 7 Data to write time overlap tDW 6 ns Data hold from write time tDH 0 ns Write disable to output in low-Z tOW 3 ns 1 Output disable to output in high-Z tOHZ 6 ns 1 Write enable to output in high-Z tWHZ 6 ns 1 Notes: 1. Transition is measured 200 mV from steady voltage with output load (B). This parameter is sampled and not 100% tested. 2. Address should be valid prior to or coincident with CS# transition low. 3. WE# and/or CS# must be high during address transition time. 4. If CS# and OE# are low during this period, I/O pins are in the output state. Then, the data input signals of opposite phase to the outputs must not be applied to them. 5. If the CS# low transition occurs simultaneously with the WE# low transition or after the WE# transition, output remains a high impedance state. 6. tAS is measured from the latest address transition to the later of CS# or WE# going low. 7. tWR is measured from the earlier of CS# or WE# going high to the first address transition. 8. A write occurs during the overlap of a low CS# and a low WE#. A write begins at the latest transition among CS# going low and WE# going low. A write ends at the earliest transition among CS# going high and WE# going high. tWP is measured from the beginning of write to the end of write. 9. tCW is measured from the later of CS# going low to the end of write. Rev.1.00, Mar.12.2004, page 7 of 11 R1RP0404D Series Timing Waveforms Read Timing Waveform (1) (WE# = VIH) tRC Address Valid address tOH tAA tACS tCHZ CS# tOE tOHZ OE# tOLZ tCLZ DOUT High impedance Valid data Read Timing Waveform (2) (WE# = VIH, CS# = VIL, OE# = VIL) tRC Address Valid address tAA tOH tOH DOUT Rev.1.00, Mar.12.2004, page 8 of 11 Valid data R1RP0404D Series Read Timing Waveform (3) (WE# = VIH, CS# = VIL, OE# = VIL)* 2 tRC CS# tACS tCHZ tCLZ DOUT High impedance Valid data High impedance Write Timing Waveform (1) (WE# Controlled) tWC Valid address Address tWR tAW OE# tCW CS#*3 tAS tWP WE#*3 tOHZ High impedance*5 DOUT tDW DIN Rev.1.00, Mar.12.2004, page 9 of 11 *4 tDH Valid data *4 R1RP0404D Series Write Timing Waveform (2) (CS# Controlled) tWC Valid address Address tWR tCW CS# *3 tAW tWP WE# *3 tAS tWHZ tOW High impedance*5 DOUT tDW DIN Rev.1.00, Mar.12.2004, page 10 of 11 *4 tDH Valid data *4 R1RP0404D Series Low VCC Data Retention Characteristics (Ta = 0 to +70C) This characteristics is guaranteed only for L-version. Parameter Symbol Min Max Unit Test conditions VCC for data retention VDR 2.0 V VCC CS# VCC - 0.2 V (1) 0 V VIN 0.2 V or (2) VCC VIN VCC - 0.2 V Data retention current ICCDR 500 A VCC = 3 V, VCC CS# VCC - 0.2 V (1) 0 V VIN 0.2 V or (2) VCC VIN VCC - 0.2 V Chip deselect to data retention time tCDR 0 ns See retention waveform Operation recovery time tR 5 ms Low VCC Data Retention Timing Waveform t CDR Data retention mode V CC 4.5 V 2.2 V V DR CS# 0V Rev.1.00, Mar.12.2004, page 11 of 11 VCC CS# VCC - 0.2 V tR Revision History Rev. Date R1RP0404D Series Data Sheet Contents of Modification Page Description 0.01 Oct. 01, 2003 Initial issue 1.00 Mar.12.2004 Deletion of Preliminary Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 (c) 2003, 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0