±0.05
±0.002
0.05
0.002
PART NO. CTS DATE
"A"
±0.12
±0.005
2.03
0.080 ±0.12
±0.005
2.41
0.095
PAD #1 MARK
SEATING
PLANE
1.27 TYP.
0.050
1.52 Ref
0.060
±0.12
±0.005
0.64
0.025
How to Order
Series 752 Products
Application specific custom
products are marked with either a
customer part number or a
non-descriptive CTS part number.
Send documentation to a CTS
Sales Office giving schematic,
resistor values and tolerance,
and other non-standard
information. See pages 24-25
for application notes.
NOTE: No dashes or spaces to appear in part number. Example: 752163101GTR See page 33 for part marking information.
16
CTS Resistor/Electrocomponents ■406 Parr Road ■Berne, IN ■46711 ■fax: (219) 589-3243 ■www.ctscorp.com ■752B
17
CTS Resistor/Electrocomponents ■406 Parr Road ■Berne, IN ■46711 ■fax: (219) 589-3243 ■www.ctscorp.com ■752B
Input/Outputs ”A” Dim.
SRT mm in.
8 11.81 ±0.12 0.465 ±0.005
9 13.08 ±0.12 0.515 ±0.005
10 14.35 ±0.12 0.565 ±0.005
12 16.89 ±0.12 0.665 ±0.005
DRT mm in.
16 11.81 ±0.12 0.465 ±0.005
18 13.08 ±0.12 0.515 ±0.005
20 14.35 ±0.12 0.565 ±0.005
24 16.89 ±0.12 0.665 ±0.005
±0.05
±0.002
0.05
0.002
PART NO. CTS DATE
"A"
1.27 TYP.
0.050
1.52 Ref
0.060
±0.12
±0.005
0.64
0.025
±0.12
±0.005
2.03
0.080 ±0.12
±0.005
2.41
0.095
SEATING
PLANE
PAD #1 MARK
PAD #1
In-Line Surface Mount Resistor Products
• High density packaging
• Low profile
• Input/outputs available:
Dual Row Terminations - 16, 18, 20, 24
Single Row Terminations - 8, 9, 10, 12
• Nickel barrier solder-coated pads
• Designed for visual inspection of solder joints
• Designed for board cleaning
• 24mm tape & reel packaging
• Application specific circuits are available
• Compatible with all solder processes
Wave, IR reflow, Vapor phase reflow
Resistance Range:
Standard: 10Ωto 1 MegΩ
Resistance Tolerance:
Standard: ±2% or 0.5Ω(whichever is greater)
Special: ±1% or 0.3Ω(whichever is greater)
Maximum Operating Voltage:
25V not to exceed rated power
Temperature Coefficient:
Standard: ±200PPM/°C
Special: ±100PPM/°C
(33Ωto 1 MegΩ)
Dielectric Strength:
100 VAC
Operating Temperature Range:
-55°C to +125°C
Power Rating (Total Network Power):
Number of input/outputs (watts)
SRT 8 9 10 12
DRT 16182024
@25°C 1.2 1.3 1.4 1.7 1.4 1.5 1.6 2.0
@70°C 0.8 0.85 0.9 1.1 0.9 0.95 1.0 1.3
Maximum Resistor Power:
(Not to Exceed Total Network Power)
Bussed & Dual Isolated
Terminator Schematic Schematic
@25°C 0.12w 0.24w
@70°C 0.08w 0.16w
Surface Mount Series 752
Single Row Termination (SRT)
Dual Row Termination (DRT)
Dimensions are mm/in.
752 16 3 101 G TR
Series 752 Resistor Code
See Page 32
Schematic 5
Tolerance
Schematic Schematic
1 & 3 5
J= ±5% All 5 schematic
G= ±2% products are
F= ±1% 2% tolerance.
D= ±1/2% (not marked)
Schematic 1 Bussed
3 Isolated
5 Dual Terminator
Packaging - TR - Tape & Reel
B - Bulk (see page 36)
Input/Outputs
SRT DRT
08 16
09 18
10 20
12 24
Bussed DRT Schematic 1
N N - 1
12
N/2 + 1
N/2
Isolated DRT Schematic 3
N N - 1
12
N/2 + 1
N/2
Bussed SRT Schematic 1
1N
Dual Terminator SRT Schematic 5
1N
R1 R1
R2
R1
R2R2
Isolated SRT Schematic 3
1N
Not Available
in 9 Pad
Not Available
in 18 Pad
Not Available
in DRT
(Ohms) EIA Code
3300 332
3900 392
4700 472
5100 512
5600 562
6800 682
8200 822
10000 103
11000 113
12000 123
15000 153
18000 183
20000 203
22000 223
27000 273
33000 333
39000 393
47000 473
56000 563
68000 683
82000 823
100000 104
110000 114
120000 124
150000 154
180000 184
200000 204
220000 224
270000 274
330000 334
390000 394
470000 474
560000 564
680000 684
820000 824
1000000 105
(Ohms) EIA Code
10 100
12 120
15 150
18 180
22 220
27 270
33 330
39 390
47 470
51 510
56 560
68 680
82 820
100 101
110 111
120 121
150 151
180 181
200 201
220 221
270 271
330 331
390 391
470 471
510 511
560 561
680 681
820 821
1000 102
1100 112
1200 122
1500 152
1800 182
2000 202
2200 222
2700 272
Values and CTS
Code listed on
page 32
The TCE of the mounting surface will
affect the long term reliability of the
solder joint between the Series 752 and
the mounting surface. Application
requirements vary and each user must
determine whether the Series 752 is
appropriate for the application. Thermal
shock data for solder joint fatigue is
available on request.
Application Notes pages 24-25
Power Derating page 33
Land Patterns pages 34-35
Packaging pages 36-37
Environmental
Performance
Specifications pages 38-39
How to Order
Series GTL & ECL Products
NOTE: No dashes or spaces to appear in part number. Example: 75324G101GTR See page 33 for part marking information.
20
CTS Resistor/Electrocomponents ■406 Parr Road ■Berne, IN ■46711 ■fax: (219) 589-3243 ■www.ctscorp.com ■75XB
21
CTS Resistor/Electrocomponents ■406 Parr Road ■Berne, IN ■46711 ■fax: (219) 589-3243 ■www.ctscorp.com ■75XB
ECL Standard Resistance Values
R1 R2 Thev Code
81Ω130Ω50Ω500A
120Ω200Ω75Ω750B
162Ω260Ω100Ω101B
220Ω270Ω121Ω121B
180Ω390Ω123Ω121A
220Ω330Ω130Ω131A
330Ω390Ω180Ω181A
330Ω470Ω190Ω191A
1
R = Terminator Resistance Value/2
234
RR
0.5nH 0.5nH 0.5nH
0.08pF 0.08pF 0.6nH
0.1pF
R
R
0.08pF
RR
0.2nH 0.2nH 0.6nH 0.2nH
0.1pF
0.1pF
12 34
Series 752
Series 753 Resistor Code
3 digit EIA
Tolerance
J = ±5%
G = ±2% (standard)
F = ±1% or .5Ω
Termination
G=GTL
E=ECL
# Pads
24 (GTL)
12 (ECL)
High Speed Digital Termination Networks
• Low inductance leadless construction
• Excellent high frequency response
• Very low crosstalk
• High power dissipation versus board space
• Spice models available for circuit simulation
• Solder-coated nickel barrier pads
• Tape & reel packaging per EIA 481
• Designed to work with standard automated
surface mount pick & place solder processes
Resistance Tolerance:
Standard ±2% or 0.5Ω(whichever is greater)
Special: ±1%
Temperature Coefficient (TCR):
Standard: ±200PPM/°C
Operating Temperature Range:
-55°C to +125°C
R18 R17 R16 R15 R14 R13 R12 R11 R10
24 13
R1 R2 R3 R4 R5
1
R6 R7 R8 R9
12
R1
1
R2
12
Spice Equivalent Circuit
GTL Termination
ECL Termination
GTL Standard Resistance Values
Value Code Value Code
39Ω390 100Ω101
47Ω470 110Ω111
50Ω500 120Ω121
51Ω510 150Ω151
56Ω560 180Ω181
62Ω620 220Ω221
68Ω680 270Ω271
75Ω750 330Ω331
82Ω820
Standard Product Offering
Termination CTS Rated Package Resistor Term. Term.
Type Series# Power @25°C Power @25°C Pitch Lines
GTL (parallel) 753 0.82W 0.06W 0.025” 18
752 2.0W 0.08W 0.050”
ECL (Thevenin) 753 0.82W 0.06W 0.025” 8
752 2.0W 0.08W 0.050”
Apply Spice Measured Spice Measured
250mV Result Result Result Result
1nS 1nS 28pS 28pS
Apply P1
View P2 4.4mV 4.5mV 48mV 34mV
View P4 3.1mV 3.0mV 28mV 22mV
Apply P2
View P1 4.4mV 5.0mV 55mV 34mV
View P4 3.0mV 2.4mV 30mV 16mV
Apply P4
View P1 3.1mV 3.0mV 30mV 22mV
View P4 3.0mV 2.6mV 30mV 16mV
GTL & ECL Terminators-Series 752 & 753
Testing based on TDR pulse using a Tektronix 11802 digitizing
scope. 28ps pulse applied, 1ns filter applied on 1ns measurement.
Terminator value tested = 50Ω.
See pages 16-19 for physical dimensions, power rating and
other 752 & 753 information.
See page 19 for available value codes See page 32 for available
value & CTS codes
753 24 G 101 G TR
Packaging -
TR - Tape & Reel
B - Bulk
(see page 36)
Part Series No. of Schematic R Resistor Value Tolerance Date Code
Pins/Pads or Code YRWK
742, 743, 744 ✓
745, 746 ✓✓
752
12 & 24 pad ✓✓ ✓ ✓ ✓3-digit
10 & 20 pad ✓✓ ✓ ✓3-digit
9 & 18 pad ✓✓✓3-digit
8 & 16 pad ✓✓✓3-digit
753
12 & 24 pad ✓✓✓2-digit
10 & 20 pad ✓✓✓2-digit
9 & 18 pad ✓✓✓
8 & 16 pad ✓✓✓
766, 767, 768 ✓✓ ✓ ✓ ✓4-digit
770 ✓✓ ✓ ✓ 4-digit
32
CTS Resistor/Electrocomponents ■406 Parr Road ■Berne, IN ■46711 ■fax: (219) 589-3243 ■www.ctscorp.com ■DTCB
33
CTS Resistor/Electrocomponents ■406 Parr Road ■Berne, IN ■46711 ■fax: (219) 589-3243 ■www.ctscorp.com ■PDC/PMC
CTS Dual Terminator Schematics
Standard CTS Dual Terminator products contain (2N-2) resistors
of two different values with each resistor value connected to a
common buss. CTS assigns the resistance value portion of the
standard part numbers of the dual terminator network in two
different methods.
The Series 770 part number includes the actual values of the
resistors in the dual terminator. For example:
770105180/470 R1=180ΩR2=470Ω
The Series 752, 766, 767 and 768 part number includes the EIA
Code value of the Thevenin equivalent resistances of R1 and R2.
The Thevenin equivalent resistance is calculated in the
following way: the suffix letter relates only to the sequence
of variations which equal the same equivalent resistance.
Reference chart.
Req = R1R2
(R1 + R2)
Examples:
766165131A R1=220ΩR2=330ΩReq=132Ω
767145191A R1=330ΩR2=470ΩReq=194Ω
768205131C R1=180ΩR2=470ΩReq=130Ω
Pin N/2 is common to R2 and Pin #N is common to R1 on
CTS Series 766, 767 and 768 .
Pin #1 is common to R2 and Pin N is common to R1 on all
CTS Series 752, 753 and 770 dual terminator schematics.
1. All tolerances ±2%.
2. Other values available on request.
3. Suffix letter has no significance–assigned in sequential order.
Part Marking
The following chart indicates the characters marked on parts with standard marking.
Dual Terminator
R1R2
R1R2
R1R2
R1R2
R1R2
R1R2
R1R2
R1R2
R1R2
R1R2
R1R2
R1R2
R1R2
R1R2
N N/2 +1
N/21
0%
0
Degrees Centigrade
Percent Rated Power
20%
40%
60%
80%
100%
120%
140%
160%
10 20 30 40 50 60 70 80 90 100 110 120
Dual Terminator Resistor Values & Codes Power Derating Curve for Resistor Networks
R1 R2 Thevenin CTS
Ohms Equivalent Code
25 50 15 ohm 150A
30 50 19 ohm 190A
30 620 29 ohm 290A
33 4.7K 33 ohm 330A
36 620 34 ohm 340A
43 620 40 ohm 400A
68 189 50 ohm 500B
75 620 67 ohm 670A
80 220 59 ohm 590A
81 130 50 ohm 500A
81 2.2K 78 ohm 780A
100 200 67 ohm 670B
100 430 81 ohm 810A
100 150 60 ohm 600A
106 169 65 ohm 650A
110 220 73 ohm 730A
118 178 71 ohm 710A
120 200 75 ohm 750B
120 180 72 ohm 720A
120 120 60 ohm 600B
150 150 75 ohm 750A
160 260 99 ohm 990A
160 240 96 ohm 960A
160 270 100 ohm 101D
162 260 100 ohm 101B
180 300 113 ohm 111B
180 470 130 ohm 131C
180 390 123 ohm 121A
180 270 108 ohm 111A
180 220 99 ohm 101A
200 1.5K 176 ohm 171D
220 330 132 ohm 131A
220 270 121 ohm 121B
220 220 110 ohm 111D
240 170 100 ohm 101C
240 620 173 ohm 171C
250 250 125 ohm 131B
270 470 171 ohm 171A
R1 R2 Thevenin CTS
Ohms Equivalent Code
270 180 108 ohm 111C
271 131 88 ohm 880A
330 470 194 ohm 191A
330 680 222 ohm 221A
330 390 179 ohm 181A
330 220 132 ohm 131D
330 330 165 ohm 171B
360 720 240 ohm 241B
360 600 225 ohm 231A
390 620 239 ohm 241A
470 1K 320 ohm 321A
470 680 278 ohm 281A
470 940 313 ohm 311A
500 500 250 ohm 251A
560 910 347 ohm 351A
560 1K 359 ohm 361A
680 1K 405 ohm 401A
750 750 375 ohm 381A
750 2.3K 566 ohm 571A
1K 3.3K 767 ohm 771A
1K 2K 667 ohm 671A
1.1K 2.2K 733 ohm 731A
1.2K 1.2K 600 ohm 601A
1.5K 1.5K 750 ohm 751A
1.5K 3.3K 1031 ohm 102A
2K 2K 1000 ohm 102B
2.2K 5.6K 1579 ohm 162A
2.2K 4.4K 1467 ohm 152A
2.2K 3.3K 1320 ohm 132A
3K 6.2K 2022 ohm 202A
3K 2K 1200 ohm 122A
3.3K 4.7K 1939 ohm 192A
3.9K 3.3K 1788 ohm 182A
4.7K 22K 3873 ohm 392A
5K 5K 2500 ohm 252A
6.8K 22K 5194 ohm 522A
10K 51K 8361 ohm 842A
50K 100K 33,333 ohm 333A
DRT
Solder Paste Stencil Opening
KSwS Q
4 mil 752 0.66 0.76 1.52 0.38
0.026 0.030 0.060 0.015
6 mil 752 0.051 0.064 1.40 0.30
0.020 0.025 0.055 0.012
34
CTS Resistor/Electrocomponents ■406 Parr Road ■Berne, IN ■46711 ■fax: (219) 589-3243 ■www.ctscorp.com ■SMLPB
35
CTS Resistor/Electrocomponents ■406 Parr Road ■Berne, IN ■46711 ■fax: (219) 589-3243 ■www.ctscorp.com ■SMLPB
SRT
Solder Paste Stencil Opening
KSwS Q
4 mil 752 2.40 0.76 0.38
0.095 0.030 NA 0.015
6 mil 752 1.90 0.63 0.33
0.075 0.025 NA 0.013
AB CD
742 1.80 0.80 0.50 0.90
0.071 0.032 0.020 0.035
743 1.90 1.27 0.80 1.20
0.075 0.050 0.032 0.047
744 3.00 1.27 0.80 1.30
0.118 0.050 0.032 0.051
745 3.00 1.27 0.80 1.30
0.118 0.050 0.032 0.051
746 1.52 0.64 0.35 0.80
0.060 0.025 0.014 0.032
Dimensions mm/inch
Series
Surface Mount Land Patterns
Concave and Convex Chip Resistor Arrays 742-746
Surface Mount Series 752 Surface Mount Series 753
Surface Mount Series 766, 767 & 768
"D"
"C"
"B"
"A"
"C"
2.03
0.080 TYP.
1.27
0.050 TYP.
0.63
0.025TYP.
"D"
"B"
"A"
Lead ABCD
Count
766-8P 3.60 5.60 7.60 3.81
0.140 0.220 0.300 0.150
766-14P 3.60 5.60 7.60 7.60
0.140 0.220 0.300 0.300
766-16P 3.60 5.60 7.60 8.90
0.140 0.220 0.300 0.350
767-14 5.34 7.37 9.40 7.60
0.210 0.290 0.370 0.300
767-16 5.34 7.37 9.40 8.90
0.210 0.290 0.370 0.350
768-14 5.34 7.37 9.40 7.60
0.210 0.290 0.370 0.300
768-16 5.34 7.37 9.40 8.90
0.210 0.290 0.370 0.350
768-20 5.34 7.37 9.40 11.43
0.210 0.290 0.370 0.450
Concave/Convex
Stencil Opening
Stencil Opening
SRT
Solder Paste Stencil Opening
KSwS Q
4 mil 753 2.75 0.30 0.15
0.108 0.012 NA 0.006
6 mil 753 1.72 0.30 0.15
0.068 0.012 NA 0.006
Stencil Opening
DRT
Solder Paste Stencil Opening
KSwS Q
4 mil 753 0.51 0.30 1.32 0.15
0.020 0.012 0.052 0.006
6 mil 753 0.028 0.030 1.47 0.15
0.011 0.012 0.058 0.006
Stencil Opening Land Patterns
No. of “H” Dim
Pads In. mm
8 0.175 4.44
9 0.200 5.08
10 0.225 5.72
12 0.275 6.99
16 0.175 4.44
18 0.200 5.08
20 0.225 5.72
24 0.275 6.99
"B" "C"
"A"
Keep out zone for stand offs.
Circuit board traces should be avoided
in this area to allow the stand off to rest
directly on the PCB.
"F"
"H"
SINGLE ROW
TERMINATION
"B" "C"
"A"
"F"
DUAL ROW
TERMINATION
"E"
"D"
Dim. In. mm.
A 0.120 3.05
B 0.025 0.64
C 0.017 0.43
D 0.050 1.27
E 0.020 0.51
F 0.035 0.89
Land Patterns
No. of “H” Dim
Pads In. mm
8 0.350 8.89
9 0.400 10.16
10 0.450 11.43
12 0.550 13.97
16 0.350 8.89
18 0.400 10.16
20 0.450 11.43
24 0.550 13.97
Dim. In. mm.
A 0.125 3.18
B 0.050 1.27
C 0.030 0.76
D 0.050 1.27
E 0.025 0.64
F 0.050 1.27
Solder Paste
Stencil Opening
"K"
"S"
Radius Q
Sw
"K"
Radius Q
Sw
NOTE:
■Land Patterns for Concave and
Convex termination can be the same.
Series 752 & 753 Stencil OpeningsSeries 752 & 753 Land Patterns
36
CTS Resistor/Electrocomponents ■406 Parr Road ■Berne, IN ■46711 ■fax: (219) 589-3243 ■www.ctscorp.com ■SPB
37
CTS Resistor/Electrocomponents ■406 Parr Road ■Berne, IN ■46711 ■fax: (219) 589-3243 ■www.ctscorp.com ■SPB
Tape & Reel 742C043 742C083 742C163 743C043 743C083 744C043 744C083 745C101 745X101 746X101
742X083 745C102 745X102
Parts/Reel 5000 5000 4000 4000 4000 4000 4000 4000 4000 5000
Pitch 4mm 4mm 4mm 4mm 4mm 4mm 8mm 4mm 4mm 4mm
Carrier Width 8mm 8mm 12mm 8mm 12mm 8mm 12mm 12mm 12mm 8mm
Material paper paper plastic plastic plastic plastic plastic plastic plastic paper
Reel diameter 7"7"7"7"7"7"7"7"7"7"
Tape & Reel TR1 TR2
Parts/reel 5000 STD 2000 STD
1000 min. 1000 min.
Tape width 24mm 24mm
Tape pitch 4mm 12mm
Reel diameter 13"13"
Standard Packaging
Series 770
Bulk Pack All Products 250 Parts/Bag
Slide Pack Tube Length = 457mm/18 in
Series 752
Series 766/767/768
Network 8 Pin 14 Pin 16 Pin 14 Pin 16 Pin 20 Pin
Package 766 766 766 767/768 767/768 768
Tape & Reel
Tape width 12mm 16mm 16mm 24mm 24mm 24mm
Tape pitch 8mm 8mm 8mm 12mm 12mm 12mm
Reel diameter 13"13"13"13"13"13"
#parts/reel* 3,000 3,000 3,000 2,000 2,000 2,000
Reel diameter 7"7"7"
#parts/reel* 800 800 800
Slide Packs
Tube length 20"20"20"20"20"20"
#parts/slide pac* 99ii 56ii 49ii 48ii 43ii 35ii
*nominal full reels or slide packs
Bar Coding Available
Bar coding of reel and boxes available on request.
CTS normally uses code configuration 39 in
accordance with (AIM) USS 39 symbol specification.
Outer container marketing per EIA-556.
Tape & Reel Specifications per EIA-481-2
Carrier Tape: Resistivity <1 X105 ohm/sq.
Cover Tape: Antistatic .004 max.
Reels: Molded plastic
Cover Tape Pull: 30 To 130 gr.
Slide Pacs: Antistatic
DIRECTION OF FEED
PART NO.
CTS DATE
DIRECTION OF FEED
PART NO. CTS DATE
PART NO. CTS DATE
PART NO. CTS DATE
PART NO. CTS DATE
PART NO. CTS DATE
PART NO. CTS DATE
Tape & Reel TR1 TR2
Parts/reel 5000 STD 2000 STD
1000 min. 1000 min.
Tape width 16mm 16mm
Tape pitch 4mm 8mm
Reel diameter 13"13"
Series 753
DIRECTION OF FEED
PART #
PART #
PART #
PART #
PART #
Series 752, 753, 766,767, 768
# Pins 4 5 6 7 8 9 10 11 12
Qty/Tube 50 40 32 28 24 22 19 18 16
Series 742,743,744,745, 746
Bulk Pack 250 parts/bag
Bulk Pack 250 parts/bag
38
CTS Resistor/Electrocomponents ■406 Parr Road ■Berne, IN ■46711 ■fax: (219) 589-3243 ■www.ctscorp.com ■EPSB
39
CTS Resistor/Electrocomponents ■406 Parr Road ■Berne, IN ■46711 ■fax: (219) 589-3243 ■www.ctscorp.com ■EPSC
Environmental Performance Specifications
Mil. Std. Test
Test Max. ∆R 202 Method Cond. Test Description
Thermal Cycling
Series 752, 753, 766, 770 0.5% 107 B 5 cycles, -65°C to +125°C
Series 767, 768 0.25%
Series 742, 743, 744, 745, 746 1.0% 5 cycles, -55°C to +125°C
Short Time Overload
Series 766, 770 0.5% 2 1/2 x rated voltage, 5 sec (100V Max.)
Series 752, 753 0.5% 2 1/2 x rated voltage, 5 sec (50V Max.)
Series 767, 768 0.25% 2 1/2 x rated voltage, 5 sec. (100V Max.)
Series 742, 745 2.0% 2 1/2 x rated voltage, 5 sec (100V Max.)
Series 743 2.0% 2 1/2 x rated voltage, 5 sec. (200V Max.)
Series 744 2.0% 2 1/2 x rated voltage, 5 sec (400V Max.)
Series 746 2.0% 2 1/2 x rated voltage, 5 sec (50V Max.)
Moisture Resistance
Series 752, 753, 766, 767, 0.5% 106 240 hours, 0.1 rated load, -10°C to +65°C,
768, 770 90% RH
Series 742, 743, 744, 745, 746 2.0%
Load Humidity
Series 752, 753, 766, 767, 1.0% 1000 hours, 0.1 rated load, 70°C, 85-92% RH
768, 770
High Temp Exposure
Series 752, 753, 766, 767, 768, 770 1.0% 240 hours, no load, @ 125°C
Series 742, 743, 744, 745, 746 1.0% 1000 hours, no load, @ 125°C
Load Life
Series 752, 753, 766, 767, 768 1.0% 108 F 2000 hours @ 70°C, rated load
Series 770 D 1000 hours @70°C, rated load
Series 742, 743, 744, 745, 746 1.0% 1000 hours @ 70°C, rated load
Resistance to Solder Heat
Series 752, 753, 766, 767, 768 0.25% 30 seconds @ 218°C, dwell
Series 770 0.25% A 3 second dwell @ 350°C solder
Series 742, 743, 744, 745, 746 1.0% B 10 second dwell @ 260°C solder
Resistance to Leach
Series 742, 743, 744, 745, 746, 752, 753 N/A 120 seconds @ 260°C solder
Mechanical Shock
Series 752, 753, 766, 767, 0.25% 213 I 100g, 1 msec., 3 shocks each plane
768, 770
Vibration
Series 752, 753, 766, 767 0.25% 204 D 20g, 10-2000Hz, 4 hours/plane
768, 770
Mil. Std. Test
Test Max. ∆R 202 Method Cond. Test Description
Terminal Strength
Series 766, 767, 768 0.9 Kg. pull, 30 sec., two 45° bends
Series 770 0.25% 2.0 Kg. pull, 30 sec., three 45° bends
Low Temp Storage
Series 752, 753, 766, 767 0.25% 24 hours @ -65°C, no load
768, 770
Low Temp Operation
Series 752, 753, 766, 767 0.25% 45 min @ -65°C, full load
768, 770
Flammability (UL)
Series 752, 753, 766, 767 N/A 94V-0
768, 770
Non-Fungus per MIL-STD 810C Series 752, 766, 767, 768, 770
Resistance to Solvents Series All Isopropyl alcohol
Solderability Series All RMA Flux, 230°C, 5 Seconds dip, 95% coverage
