DC-DC CONVERTERS E Class Non-isolated 1
SIL05E Series
3 Vin to 5.5 Vin single output
NEW Product
File Name: sil05e_05.pdf Rev (04): 16 Dec 2005
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated SPECIFICATIONS
The SIL05E series are non-isolated dc-dc converters packaged in a single-in-line footprint giving
designers a cost effective solution for conversion from a 3.3 Vin to 5 Vin source. The SIL05E
has a wide input range (3.0 Vdc to 5.5 Vdc) and offers a wide 0.75 Vdc to 3.63 Vdc output
voltage range with a 5 A load, which allows for maximum design flexibility and a pathway for
future upgrades. The SIL05E is designed for applications that include distributed power,
workstations, optical network and wireless applications. Implemented using state of the art
surface-mount technology and automated manufacturing techniques, the SIL05E offers
compact size and efficiencies of up to 94%.
•5 A Current rating
•Input voltage range: 3.0 Vin to 5.5 Vin
•Output voltage range: 0.75 Vdc to 3.63 Vdc
•Ultra high efficiency: 94% @ 5 Vin and 3.3 Vout
•Extremely low internal power dissipation
•Minimal thermal design concerns
•Designed in reliability: MTBF of >9 million hours
per Telcordia SR-332
•Ideal solution where board space is at a premium
or tighter card pitch is required
•Industry standard footprint
•Available RoHS compliant
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. E174104
UL 60950 File No. E174104
TÜV Product Service (EN60950) Certificate No. B 03 10 38572 037
CB report and certificate to DE3-51686M1
OUTPUT SPECIFICATIONS
Voltage adjustability 0.75-3.63 Vdc
Setpoint accuracy ±0.4%
Line regulation ±1.0%
Load regulation ±1.0%
Minimum load 0 A
Overshoot/undershoot None
Ripple and noise 75 mV pk-pk
5 Hz to 20 MHz 25 mV rms
Temperature co-efficient ±0.01%/ºC
Transient response 60 mV max. deviation
50 µs recovery to
within 1%
INPUT SPECIFICATIONS
Input voltage range 3.0-5.5 Vdc
Input current No load (max.) 150 mA
Input current (max.) 3.9 A max. @ Io max.
and Vout = 3.3 V
Input reflected ripple 40 mA rms
Remote ON/OFF (See Note 1)
Start-up time 20 ms
EMC CHARACTERISTICS
Electrostatic discharge EN61000-4-2, IEC801-2
Conducted immunity EN61000-4-6
Radiated immunity EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency 94% typ.
Insulation voltage Non-isolated
Switching frequency Fixed 300 kHz typ.
Approvals and EN60950
standards UL/cUL60950
Material flammability UL94V-0
Dimensions (LxWxH) 0.902 x 0.279 x 0.402 inches
22.90 x 7.09 x 10.21 mm
Weight 2.5 g (0.09 oz)
MTBF Telcordia SR-332 9,009,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient, -40 ºC to +85 ºC
(See Note 2) temperature
Non-operating -40 ºC to +125 ºC
PROTECTION
Short-circuit Continuous
Thermal Automatic recovery
SIL05E Series
3.0-5.5Vin single output
File Name: sil05e_05.pdf Rev (04): 16 Dec 2005
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
DC-DC CONVERTERS E Class Non-isolated 2
NEW Product
NNootteess
1The SIL05E features a ‘Negative Logic’ Remote ON/OFF operation. If not
using the Remote ON/OFF pin, leave the pin open (the converter will be
on). The Remote ON/OFF pin is referenced to ground
The following conditions apply for the SIL05E:
Configuration Converter Operation
Remote pin open circuit Unit is ON
Remote pin pulled low Unit is ON
Remote pin pulled high [Von/off >2.5 V] Unit is OFF
An ‘Positive Logic’ Remote ON/OFF version is also possible with this
converter. To order please place the suffix ‘R’ towards the end of the
model number e.g. SIL05E-05W3V3-VRJ.
2Full derating curves available in both the Longform Datasheet and
Application Note.
3For horizontal mounting option please consult factory for details.
4TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
5NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool
at http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
OUTPUT
INPUT OUTPUT
OUTPUT OUTPUT
EFFICIENCY REGULATION MODEL
POWER
VOLTAGE VOLTAGE
CURRENT CURRENT
(TYP.) LINE LOAD NUMBER (3,4,5)
(MAX.) (MIN.) (MAX.)
18.15 W 3.0-5.5 Vin
0.75-3.63 Vdc
0 A 5 A 94% ±1.0% ±1.0% SIL05E-05W3V3-VJ
SIL05E-05W3V3-VJ
Part Number System with Options
Product Family
SIL = Single In Line
Rated Output Current
05 = 5 Amps
Input Voltage
05 = 3.0 Vdc to 5.5 Vdc
Type of Output
W = Wide
Output Voltage
0.75 Vdc to 3.63 Vdc
The ultra-wide output voltage trim range offers major advantages to users who
select the SIL05E-05W3V3. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.75 Vdc to 3.63 Vdc. When the SIL05E-05W3V3
converter leaves the factory the output has been adjusted to the default
voltage of 0.75 V
•When Vin ≥ 4.5 V, then Vout can be adjusted from 0.75 Vdc to 3.63 Vdc
• When Vin < 4.5V, then Vout can be adjusted from 0.75 Vdc to 2.75 Vdc
OOuuttppuutt VVoollttaaggee AAddjjuussttmmeenntt ooff tthhee SSIILL0055EE--0055WW33VV33 SSeerriieess
Performance
E = Enhanced Performance
Mounting Option
V = Vertical
H = Horizontal
Packaging Options (4)
J = Pb-free (RoHS 6/6 compliant)
SIL05E Series
3.0-5.5Vin single output
File Name: sil05e_05.pdf Rev (04): 16 Dec 2005
Please consult our website for the following items: Application Note Longform Datasheet www.artesyn.com
Datasheet © Artesyn Technologies
®
2005
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent
accompany the sale of any such product(s) or information contained herein.
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
DC-DC CONVERTERS E Class Non-isolated 3
NEW Product
All dimensions in inches (mm)
All tolerance ±0.010in (±0.25mm)
unless otherwise stated
0.025[0.64] x 0.025[0.64]
Connector 5 places
54 23 1
0.902 [22.90]
0.050 [1.27]
0.100 [2.54]
0.600 [15.24]
0.700 [17.78]
0.800 [20.32]
0.402
[10.21]
0.279
[7.09]
0.150 [3.81]
PIN CONNECTIONS
PIN NUMBER FUNCTION
1 Vout
2 Trim
3 GND
4Vin
5 Remote ON/OFF
