Low Noise Transistors BC549B,C BC550B,C NPN Silicon MAXIMUM RATINGS Rating Symbol BC549 BC550 Unit Collector-Emitter Voltage VCEO 30 45 Vdc Collector-Base Voltage VCBO 30 50 Vdc Emitter-Base Voltage VEBO 5.0 Vdc Collector Current -- Continuous IC 100 mAdc Total Device Dissipation @ TA = 25C Derate above 25C PD 625 5.0 mW mW/C Total Device Dissipation @ TC = 25C Derate above 25C PD 1.5 12 Watt mW/C TJ, Tstg -55 to +150 C Symbol Max Unit Operating and Storage Junction Temperature Range 1 2 3 CASE 29-04, STYLE 17 TO-92 (TO-226AA) THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Ambient RJA 200 C/W Thermal Resistance, Junction to Case RJC 83.3 C/W COLLECTOR 1 2 BASE 3 EMITTER ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Symbol Characteristic Min Typ Max Unit 30 45 -- -- -- -- 30 50 -- -- -- -- 5.0 -- -- Vdc -- -- -- -- 15 5.0 nAdc Adc -- -- 15 nAdc OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage (IC = 10 mAdc, IB = 0) Collector-Base Breakdown Voltage (IC = 10 Adc, IE = 0) V(BR)CEO BC549B,C BC550B,C V(BR)CBO BC549B,C BC550B,C Emitter-Base Breakdown Voltage (IE = 10 Adc, IC = 0) V(BR)EBO Collector Cutoff Current (VCB = 30 V, IE = 0) (VCB = 30 V, IE = 0, TA = +125C) ICBO Emitter Cutoff Current (VEB = 4.0 Vdc, IC = 0) IEBO Semiconductor Components Industries, LLC, 2001 February, 2001 - Rev. 1 Vdc 1 Vdc Publication Order Number: BC549B/D BC549B,C BC550B,C ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) (Continued) Characteristic Symbol Min Typ Max Unit 100 100 200 420 150 270 290 500 -- -- 450 800 -- -- -- 0.075 0.3 0.25 0.25 0.6 0.6 -- 1.1 -- -- -- 0.55 0.52 0.55 0.62 -- -- 0.7 fT -- 250 -- MHz Ccbo -- 2.5 -- pF 240 450 330 600 500 900 -- -- 0.6 -- 2.5 10 ON CHARACTERISTICS DC Current Gain (IC = 10 Adc, VCE = 5.0 Vdc) hFE BC549B/550B BC549C/550C BC549B/550B BC549C/550C (IC = 2.0 mAdc, VCE = 5.0 Vdc) Collector-Emitter Saturation Voltage (IC = 10 mAdc, IB = 0.5 mAdc) (IC = 10 mAdc, IB = see note 1) (IC = 100 mAdc, IB = 5.0 mAdc, see note 2) VCE(sat) Base-Emitter Saturation Voltage (IC = 100 mAdc, IB = 5.0 mAdc) VBE(sat) Base-Emitter On Voltage (IC = 10 Adc, VCE = 5.0 Vdc) (IC = 100 Adc, VCE = 5.0 Vdc) (IC = 2.0 mAdc, VCE = 5.0 Vdc) VBE(on) -- Vdc Vdc Vdc SMALL-SIGNAL CHARACTERISTICS Current-Gain -- Bandwidth Product (IC = 10 mAdc, VCE = 5.0 Vdc, f = 100 MHz) Collector-Base Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Small-Signal Current Gain (IC = 2.0 mAdc, VCE = 5.0 V, f = 1.0 kHz) hfe BC549B/BC550B BC549C/BC550C Noise Figure (IC = 200 Adc, VCE = 5.0 Vdc, RS = 2.0 k, f = 1.0 kHz) (IC = 200 Adc, VCE = 5.0 Vdc, RS = 100 k, f = 1.0 kHz) dB NF1 NF2 NOTES: 1. IB is value for which IC = 11 mA at VCE = 1.0 V. 2. Pulse test = 300 s - Duty cycle = 2%. RS -- in en IDEAL TRANSISTOR Figure 1. Transistor Noise Model http://onsemi.com 2 BC549B,C BC550B,C 1.0 VCE = 10 V TA = 25C 1.5 0.9 1.0 0.8 0.6 0.4 VBE(on) @ VCE = 10 V 0.6 0.5 0.4 0.3 VCE(sat) @ IC/IB = 10 0.1 0.5 1.0 2.0 5.0 10 20 50 IC, COLLECTOR CURRENT (mAdc) 0 0.1 100 200 Figure 2. Normalized DC Current Gain 0.2 0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mAdc) 50 100 Figure 3. "Saturation" and "On" Voltages 10 400 300 7.0 100 80 60 C, CAPACITANCE (pF) 200 VCE = 10 V TA = 25C 40 30 TA = 25C Cib 5.0 3.0 Cob 2.0 20 0.5 0.7 1.0 2.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (mAdc) 1.0 0.4 50 0.6 1.0 Figure 4. Current-Gain -- Bandwidth Product r b, BASE SPREADING RESISTANCE (OHMS) BANDWIDTH PRODUCT (MHz) VBE(sat) @ IC/IB = 10 0.7 0.2 0.3 0.2 0.2 f T, CURRENT-GAIN TA = 25C 0.8 V, VOLTAGE (VOLTS) hFE, NORMALIZED DC CURRENT GAIN 2.0 2.0 4.0 10 VR, REVERSE VOLTAGE (VOLTS) Figure 5. Capacitance 170 160 150 VCE = 10 V f = 1.0 kHz TA = 25C 140 130 120 0.1 0.2 0.5 1.0 2.0 IC, COLLECTOR CURRENT (mAdc) 5.0 Figure 6. Base Spreading Resistance http://onsemi.com 3 10 20 40 BC549B,C BC550B,C PACKAGE DIMENSIONS CASE 029-04 (TO-226AA) ISSUE AD A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R P L F SEATING PLANE K DIM A B C D F G H J K L N P R V D J X X G H V C 1 SECTION X-X N N INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --- MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.41 0.55 0.41 0.48 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 --- STYLE 17: PIN 1. COLLECTOR 2. BASE 3. EMITTER ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 4 BC549B/D