
30CTQ..., 30CTQ...S, 30CTQ...-1
2
PD-2.300 rev. B 04/99
www.irf.com
30CTQ050 30CTQ060
30CTQ050S 30CTQ060S
30CTQ050-1 30CTQ060-1
VRMax. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V) 50 60
Voltage Ratings
Parameters
Absolute Maximum Ratings
Parameters Values Units Conditions
IF(AV) Max. Average Forward (Per Leg) 15 A 50% duty cycle @ TC = 105°C, rectangular wave form
Current * See Fig. 5 (Per Device) 30
IFSM Max. Peak One Cycle Non-Repetitive 1000 5µs Sine or 3µs Rect. pulse
Surge Current (Per Leg) * See Fig. 7 260 10ms Sine or 6ms Rect. pulse
EAS Non-Repetitive Avalanche Energy 13 mJ TJ = 25 °C, IAS
= 1.50 Amps, L = 11.5 mH
(Per Leg)
IAR Repetitive Avalanche Current 1.50 A Current decaying linearly to zero in 1 µsec
(Per Leg) Frequency limited by TJ max. VA = 1.5 x VR typical
A
TJMax. Junction Temperature Range -55 to 150 °C
Tstg Max. Storage Temperature Range -55 to 150 °C
RthJC Max. Thermal Resistance Junction 3.25 °C/W DC operation
to Case (Per Leg)
RthJC Max. Thermal Resistance Junction 1.63 °C/W DC operation
to Case (Per Package)
RthCS Typical Thermal Resistance, Case 0.50 °C/W Mounting surface , smooth and greased
to Heatsink (only for TO-220)
wt Approximate Weight 2 (0.07) g (oz.)
T Mounting Torque Min. 6 (5)
Max. 12 (10)
Thermal-Mechanical Specifications
Kg-cm
(Ibf-in)
Parameters Values Units Conditions
VFM Max. Forward Voltage Drop 0.62 V @ 15A
(Per Leg) * See Fig. 1 ( 1 ) 0.82 V @ 30A
0.56 V @ 15A
0.71 V @ 30A
IRM Max. Reverse Leakage Current 0.80 mA TJ = 25 °C
(Per Leg) * See Fig. 2 ( 1 ) 45 mA TJ = 125 °C
VF(TO) Threshold Voltage 0.39 V TJ = TJ max.
rtForward Slope Resistance 8.47 mΩ
CTMax. Junction Capacitance (Per Leg) 72 0 p F VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C
LSTypical Series Inductance (Per Leg) 8. 0 n H Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change 10,000 V / µ s
(Rated VR)
TJ = 25 °C
TJ = 125 °C
Electrical Specifications
(1) Pulse Width < 300µs, Duty Cycle <2%
VR = rated VR
Parameters Values Units Conditions
Following any rated
load condition and with
rated VRRM applied