2
Temperature Stability
Load Life
Item Performance Characteristics
Rated Voltage Range 4V.DC 50V.DC
Operating Temperature Range -40 +85
Nominal Capacitance Range 0.1 F 330 F
Capacitance Tolerance 20%(M,+20 ,120Hz)
2 I 0.01CV 3 A( )20
After application of rated voltage for 2 minutes: I 0.01CV or 3 A(Whichever is greater)20
C: ( F) C: Nominal Capacitance in F;
V: (V) V: Rated Working Voltage in V
(tan )
Dissipation Factor
+85 2000
After applying rated voltage for 2000 hours at +85 , Capacitors meet the characteristics
requirements listed below;
Leakage current Less than the initial specified value
Capacitance Change
Dissipation factor
200%
Less than 200% the initial specified value
+85 1000
After leaving capacitors under no load at +85 for 1000 hours, capacitors meet the characteristics
listed above
Leakage Current
Shelf Life
Test of resistance to
soldering heat
250 30
Capacitors placed on a 250 hot plate for 30 seconds with their electrode terminais facing downward
will fulfill the following conditions after being cooled to room temperature.
tan (MAX)
(20 ,120Hz)
4
0.40
(V)
Rated Working Voltage
6.3
0.26
10
0.22
16
0.18
25
0.16
35
0.14
50
0.12
4
7
(V)
Rated Working Voltage
(120Hz)
Impedance Ratio
6.3
4
16
2
25
2
35 50
22
15 8 44 33
10
3
8
(z-25 /z+20 )
(z-40 /z+20 )
25%
Within 25% of the initial measured value
Freq(Hz)
Cap( F) 50(60) 100(120) 500 1K 10K
0.1 1
10 47
0.50
0.80
1.00
1.00
1.20
1.20
1.30
1.30
1.50
1.50
2.2 4.7
100 330
0.65
0.80
1.00
1.00
1.20
1.10
1.30
1.15
1.50
1.20
Leakage current Less than the initial specified value
Capacitance Change
Dissipation factor Less than the initial specified value
10%
Within 10% of the initial measured value
MS FEATURE
: 85 2000 Load life:85 2000 hours
5.5mm Chip type with 5.5 mm height
Ideally suited for automatic SMT and high density circuits
SPECITICATIONS
MULTIPLIER FOR RIPPLE CURRENT
Frequency coefficient
U-chip
ALUMINUM ELECTROLYTIC CAPACITOR