ST232B ST232C 5 V powered multi-channel RS-232 drivers and receivers Features Supply voltage range: 4.5 to 5.5 V Supply current no load (typ.): 5 mA Transmitter output voltage swing (typ): 7.8 V Controlled output slew rate Receiver input voltage range: 30 V Data rate (typ.): 220 kbps Operating temperature range: - -40 to 85 C - 0 to 70 C Compatible with MAX232 and MAX202 DIP SOP SOP Large TSSOP Description The ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where 12 V is not available. The ST232 uses a single 5 V power supply and only four external capacitors (0.1 F). Typical applications are in: portable computers, low power modems, interfaces translation, battery powered RS-232 system, multi-drop RS-232 networks. Table 1. Device summary Order code Temperature range Package Packaging ST232CN 0 to 70 C DIP-16 25 parts per tube / 40 tube per box ST232CDR 0 to 70 C SO-16 (tape and reel) 2500 parts per reel ST232BDR -40 to 85 C SO-16 (tape and reel) 2500 parts per reel ST232CWR 0 to 70 C SO-16 Large (tape and reel) 1000 parts per reel ST232BWR -40 to 85 C SO-16 Large (tape and reel) 1000 parts per reel ST232CTR 0 to 70 C TSSOP16 (tape and reel) 2500 parts per reel ST232BTR -40 to 85 C TSSOP16 (tape and reel) 2500 parts per reel February 2008 Rev 14 1/19 www.st.com 19 ST232B - ST232C Contents 1 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Typical application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5 Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 6 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2/19 ST232B - ST232C Pin configuration 1 Pin configuration Figure 1. Pin connections (top view) Table 2. Pin description Pin n Symbol Note 1 C1+ Positive terminal for the first charge pump capacitor 2 V+ Doubled voltage terminal 3 C1- Negative terminal for the first charge pump capacitor 4 C2+ Positive terminal for the second charge pump capacitor 5 C2- Negative terminal for the second charge pump capacitor 6 V- Inverted voltage terminal 7 T2OUT 8 R2IN 9 R2OUT Second receiver output voltage 10 T2IN Second transmitter input voltage 11 T1IN First transmitter input voltage 12 R1OUT First receiver output voltage 13 R1IN 14 T1OUT 15 GND Ground 16 VCC Supply voltage Second transmitter output voltage Second receiver input voltage First receiver input voltage First transmitter output voltage 3/19 Maximum ratings ST232B - ST232C 2 Maximum ratings Table 3. Absolute maximum ratings Symbol Parameter VCC Supply voltage TIN Transmitter input voltage range RIN Receiver input voltage range Value Unit -0.3 to 6 V -0.3 to (VCC + 0.3) V 30 V (V+ + 0.3) to (V- - 0.3) V V TOUT Transmitter output voltage range ROUT Receiver output voltage range -0.3 to (VCC + 0.3) TSCTOUT Short circuit duration on TOUT infinite TSTG Note: 4/19 Storage temperature range -65 to + 150 1 Absolute maximum ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. 2 No external supply can be applied to V+ terminal and V- terminal. ST232B - ST232C Electrical characteristics 3 Electrical characteristics Table 4. Electrical characteristics (C1 - C4 = 0.1 F, VCC = 5 V 10 %, TA = -40 to 85 C, unless otherwise specified. Typical values are referred to TA = 25 C). Symbol ISUPPLY Table 5. Parameter Test condition VCC Power supply current Min. No Load, TA = 25C Parameter Test condition Unit 5 10 mA All transmitter outputs are loaded with 3k to GND Min. Typ. 5 7.8 VTOUT Output voltage swing ITIL Input leakage current VTIL Input logic threshold low VTIH Input logic threshold high SRT Transition slew rate TA = 25C, VCC = 5V RL = 3 to 7k, CL = 50 to 2500pF (1) DR Data rate (2) 120 Transmitter output resistance VCC = V+ = V- = 0V VOUT = 2V 300 Transmitter output short circuit current One TXOUT to GND ISC Max. Transmitter electrical characteristics (C1 - C4 = 0.1 F, VCC = 5 V 10 %, TA = -40 to 85 C, unless otherwise specified. Typical values are referred to TA = 25 C). Symbol RTOUT Typ. Max. Unit V 40 0.8 A V 7 2 V 30 V/s 220 kbits/s 10 60 mA 1. Measured from 3 V to -3 V or from -3 V to 3 V 2. One transmitter output is loaded with RL = 3 k to 7 k, CL = 50 to 1000 pF 5/19 Electrical characteristics Table 6. Symbol ST232B - ST232C Receiver electrical characteristics (C1 - C4 = 0.1 F, VCC = 5 V 10 %, TA = -40 to 85 C, unless otherwise specified. Typical values are referred to TA = 25 C). Parameter Test condition Min. Typ. VRIN Receiver input voltage operating range RRIN RS-232 input resistance TA = 25C, VCC = 5 V, VRIN = 5V 3 5 VRIL RS-232 input threshold low TA = 25C, VCC = 5 V 0.8 1.2 VRIH RS-232 input threshold high TA = 25C, VCC = 5 V RS-232 input hysteresis VCC = 5V VROL TTL/CMOS output voltage low IOUT = 3.2mA (to VCC) VROH TTL/CMOS output voltage high IOUT = -1mA (to GND) ISCR Receiver output short circuit current tDR Receiver propagation delay VRIHYS 1. RS-232 in to TTL-CMOS out (from 50% to 50%) 6/19 -30 CL = 150pF (1) 0.2 3.5 Max. Unit 30 V 7 k V 1.7 2.4 V 0.5 1 V 0.4 V VCC-0.4 V 10 mA 0.3 1 s ST232B - ST232C Typical application 4 Typical application Figure 2. Application circuit (1) (2) 1. C1-4 capacitors can even be 1F ones 2. C1-4 can be common or biased capacitors Table 7. Capacitance value (F) C1 C2 C3 C4 C5 0.1 0.1 0.1 0.1 0.1 7/19 Typical performance characteristics ST232B - ST232C 5 Typical performance characteristics Figure 3. (Unless otherwise specified TJ = 25 C) Supply current vs temperature Figure 4. Data rate vs temperature Figure 5. Receiver propagation delay Figure 6. Driver propagation delay Figure 7. High level output voltage swing vs temperature Figure 8. Low level output voltage swing vs temperature 8/19 ST232B - ST232C Figure 9. High level transmitter output short circuit current vs temperature Figure 11. High level receiver output short circuit current vs temperature Typical performance characteristics Figure 10. Low level transmitter output short circuit current vs temperature Figure 12. Low level receiver output short circuit current vs temperature 9/19 Package mechanical data 6 ST232B - ST232C Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 10/19 ST232B - ST232C Package mechanical data Plastic DIP-16 (0.25) mechanical data mm. inch. Dim. Min. a1 0.51 B 0.77 Typ. Max. Min. Typ. Max. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 11/19 Package mechanical data ST232B - ST232C SO-16 mechanical data Dim. mm. Min. Typ. A a1 inch. Max. Min. Typ. 1.75 0.1 0.25 a2 Max. 0.068 0.004 0.010 1.64 0.063 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 (typ.) D 9.8 10 0.385 0.393 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.62 0.024 8 (max.) 0016020D 12/19 ST232B - ST232C Package mechanical data SO-16L mechanical data Dim. mm. Min. Typ. A a1 inch. Max. Min. Typ. 2.65 0.1 0.104 0.2 a2 Max. 0.004 0.008 2.45 0.096 b 0.35 0.49 0.014 0.019 b1 0.23 0.32 0.009 0.012 C 0.5 0.020 c1 45 (typ.) D 10.1 10.5 0.397 0.413 E 10.0 10.65 0.393 0.419 e 1.27 0.050 e3 8.89 0.350 F 7.4 7.6 0.291 0.300 0.5 1.27 0.020 0.050 G L M S 0.75 0.029 8 (max.) PO13I 13/19 Package mechanical data ST232B - ST232C TSSOP16 mechanical data mm. inch. Dim. Min. Typ. A Max. Min. Typ. Max. 1.2 A1 0.05 A2 0.8 b 0.047 0.15 0.002 0.004 0.006 1.05 0.031 0.039 0.041 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0079 D 4.9 5 5.1 0.193 0.197 0.201 E 6.2 6.4 6.6 0.244 0.252 0.260 E1 4.3 4.4 4.48 0.169 0.173 0.176 1 e 0.65 BSC K 0 L 0.45 A 0.60 0.0256 BSC 8 0 0.75 0.018 8 0.024 0.030 A2 A1 b e K c L E D E1 PIN 1 IDENTIFICATION 1 0080338D 14/19 ST232B - ST232C Package mechanical data Tape & reel SO-16 mechanical data mm. inch. Dim. Min. A Typ. Max. Min. 330 Max. 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 13.2 Typ. 0.504 22.4 0.519 0.882 Ao 6.45 6.65 0.254 0.262 Bo 10.3 10.5 0.406 0.414 Ko 2.1 2.3 0.082 0.090 Po 3.9 4.1 0.153 0.161 P 7.9 8.1 0.311 0.319 15/19 Package mechanical data ST232B - ST232C Tape & reel SO-16L mechanical data mm. inch. Dim. Min. A Max. Min. 330 13.2 Typ. Max. 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 16/19 Typ. 0.504 22.4 0.519 0.882 Ao 10.8 11.0 0.425 0.433 Bo 10.7 10.9 0.421 0.429 Ko 2.9 3.1 0.114 0.122 Po 3.9 4.1 0.153 0.161 P 11.9 12.1 0.468 0.476 ST232B - ST232C Package mechanical data Tape & reel TSSOP16 mechanical data mm. inch. Dim. Min. A Typ. Max. Min. 330 Max. 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 13.2 Typ. 0.504 22.4 0.519 0.882 Ao 6.7 6.9 0.264 0.272 Bo 5.3 5.5 0.209 0.217 Ko 1.6 1.8 0.063 0.071 Po 3.9 4.1 0.153 0.161 P 7.9 8.1 0.311 0.319 17/19 Revision history ST232B - ST232C 7 Revision history Table 8. Document revision history Date Revision 02-Sep-2005 11 Mistake ITIL max. on table 5. 27-Oct-2006 12 Order codes updated. 14-Nov-2007 13 Added Table 1. 08-Feb-2008 14 Modified: Table 1 on page 1. 18/19 Changes ST232B - ST232C Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 19/19