HCMOS 5.0x3.2mm SMD Oscillator O5HS DATASHEET (Former F510L, F540L, F530L Series) * HCMOS Output * Stabilities to 20 PPM * Temperature Ranges as wide as -40C to +85C * Supply Voltages: 1.8V, 2.5V, 3.3V 1.8V ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Storage Temperature Range (TSTG) Supply Voltage (VDD) Input Current (IDD) 1.000 ~ 32.000MHz >32.000 ~ 70.000MHz >70.000 ~ 120.000MHz >120.000 ~ 160.000MHz Standby Current Output Symmetry (50% VDD) Rise/Fall Time (20%/80% VDD Levels) (TR/TF) 1.000 ~ 32.000MHz >32.000 ~ 120.000MHz >120.000 ~ 160.000MHz Output Voltage (VOL) (VOH) Output Load (HCMOS) Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 MAX (unless otherwise noted) 1 ~ 160MHz -55 ~ +125C 1.8V5% 5mA 10mA 15mA 30mA 10A 40% ~ 60% 5.0nS 3.5nS 3.0nS 20% VDD 80% VDD Min 15pF 10mS 30nS 10mS ENABLE / DISABLE FUNCTION Pin1 Output (pin 3) Active OPEN 1 Active `1' Level VIH 70%VDD High Z `0' Level VIL 30%VDD * Available Options by Stability & Operating Temp for 1.8V Frequency Stability 100PPM2 100PPM2 50PPM2 50PPM2 25PPM2 25PPM3 20PPM3 Operating Temperature (C) -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 Frequency Range (MHz) 1.000 1.000 1.000 1.000 1.000 1.000 1.000 ~ 160.000 ~ 160.000 ~ 160.000 ~ 160.000 ~ 160.000 ~ 160.000 ~ 160.000 1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open. Inclusive of 25C tolerance, operating temperature range, input voltage change, load change, reflow, one-year aging, shock, and vibration. 3 Inclusive of 25C tolerance, operating temperature range. 2 (c) Copyright 2019 Fox Electronics. All rights reserved Title / Description: O5HS SERIES STANDARD SPECIFICATIONS Drawing Number: O5HS-DOC-1 Size: A Part Number: Cage: 61429 Draftsperson: BEC Approved: MAJ Revision Date: 08/12/2019 Page 1 of 5 HCMOS 5.0x3.2mm SMD Oscillator O5HS DATASHEET (Former F510L, F540L, F530L Series) 2.5V ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Storage Temperature Range (TSTG) Supply Voltage (VDD) Input Current (IDD) 1.000 ~ 32.000MHz >32.000 ~ 50.000MHz >50.000 ~ 125.000MHz >125.000 ~ 160.000MHz Standby Current Output Symmetry (50% VDD) 1.000 ~ 50.000MHz > 50.000 ~ 160.000MHz Rise/Fall Time (10%/90% VDD Levels) (TR/TF) Output Voltage (VOL) (VOH) Output Load (HCMOS) Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 MAX (unless otherwise noted) 1 ~ 160 MHz -55 ~ +125C 2.5V5% 7mA 12mA 26mA 35mA 10A 45% ~ 55% 40% ~ 60% 5nS 10% VDD 90% VDD Min 15pF 10mS 15 nS 10mS ENABLE / DISABLE FUNCTION Pin1 Output (pin 3) Active OPEN 1 Active `1' Level VIH 70%VDD High Z `0' Level VIL 30%VDD * Available Options by Stability & Operating Temp for 2.5V Frequency Stability2 100PPM2 100PPM2 50PPM2 50PPM2 25PPM2 25PPM3 20PPM3 Operating Temperature (C) -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 Frequency Range (MHz) 1.000 1.000 1.000 1.000 1.000 1.000 1.000 ~ 160.000 ~ 160.000 ~ 160.000 ~ 160.000 ~ 160.000 ~ 160.000 ~ 160.000 1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open. Inclusive of 25C tolerance, operating temperature range, input voltage change, load change, reflow, one-year aging, shock, and vibration. 3 Inclusive of 25C tolerance, operating temperature range. 2 (c) Copyright 2019 Fox Electronics. All rights reserved Title / Description: O5HS SERIES STANDARD SPECIFICATIONS Drawing Number: O5HS-DOC-1 Size: A Part Number: Cage: 61429 Draftsperson: BEC Approved: MAJ Revision Date: 08/12/2019 Page 2 of 5 HCMOS 5.0x3.2mm SMD Oscillator O5HS DATASHEET (Former F510L, F540L, F530L Series) 3.3V ELECTRICAL CHARACTERISTICS PARAMETERS MAX (unless otherwise noted) Frequency Range (FO) Storage Temperature Range (TSTG) Supply Voltage (VDD) Input Current (IDD) 1.000 ~ 32.000MHz >32.000 ~ 50.000MHz >50.000 ~ 67.000MHz >67.000 ~ 170.000MHz Standby Current Output Symmetry (50% VDD) 1.000 ~ 50.000MHz >50.000 ~ 170.000MHz Rise/Fall Time (10%/90% VDD Levels) (TR/TF) 1.000 ~ 80.000MHz >80.000 ~ 125.000MHz >125.000 ~ 170.000MHz Output Voltage (VOL) (VOH) Output Current (IOL) (IOH) Output Load (HCMOS) Start-up Time (TS) Output Disable Time 1 Output Enable Time 1 1 ~ 170MHz -55 ~ +125C 3.3V10% 15mA 20mA 25mA 40mA 10A 45% ~ 55% 40% ~ 60% 6nS 4nS 3nS 10% VDD 90% VDD Min 2 mA Min -2 mA Min 15pF 10mS 150nS 10mS ENABLE / DISABLE FUNCTION Pin1 Output (pin 3) Active OPEN 1 Active `1' Level VIH 70%VDD High Z `0' Level VIL 30%VDD * Available Options by Stability & Operating Temp for 3.3V Frequency Stability2 100PPM2 100PPM2 100PPM2 50PPM2 50PPM2 50PPM2 25PPM2 25PPM2 25PPM3 20PPM3 20PPM3 Operating Temperature (C) -10 ~ +70 -20 ~ +70 -40 ~ +85 -10 ~ +70 -20 ~ +70 -40 ~ +85 -10 ~ +70 -20 ~ +70 -40 ~ +85 -10 ~ +70 -20 ~ +70 Frequency Range (MHz) 1.000 ~ 170.000 1.000 ~ 170.000 1.000 ~ 170.000 1.000 ~ 170.000 1.000 ~ 170.000 1.000 ~ 170.000 1.000 ~ 170.000 1.000 ~ 170.000 1.000 ~ 170.000 1.000 ~ 170.000 1.000 ~ 170.000 1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open. Inclusive of 25C tolerance, operating temperature range, input voltage change, load change, reflow, one-year aging, shock, and vibration. 3 Inclusive of 25C tolerance, operating temperature range. 2 (c) Copyright 2019 Fox Electronics. All rights reserved Title / Description: O5HS SERIES STANDARD SPECIFICATIONS Drawing Number: O5HS-DOC-1 Size: A Part Number: Cage: 61429 Draftsperson: BEC Approved: MAJ Revision Date: 08/12/2019 Page 3 of 5 HCMOS 5.0x3.2mm SMD Oscillator O5HS DATASHEET (Former F510L, F540L, F530L Series) DIMENSIONS / MECHANICAL SPECIFICATIONS Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish Seal Method Lead (Pb) Free ROHS/REACH Compliant 260C / 10 Seconds x 2 1 Au over Ni Seam Yes Yes Notes: *A 0.01F capacitor should be placed between VDD (Pin 4) and GND (Pin2) to minimize power supply line noise. *Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary (c) Copyright 2019 Fox Electronics. All rights reserved Title / Description: O5HS SERIES STANDARD SPECIFICATIONS Drawing Number: O5HS-DOC-1 Size: A Part Number: Cage: 61429 Draftsperson: BEC Approved: MAJ Revision Date: 08/12/2019 Page 4 of 5 HCMOS 5.0x3.2mm SMD Oscillator O5HS DATASHEET (Former F510L, F540L, F530L Series) A O1.5 B 4.0 Tape Specifications (millimeters) C D E F Std Reel Qty 8.0 5.5 12.0 1.5 1,000 G 2.0 Reel Specifications (millimeters) H I J K L O13 O21 O62 O180 13.5 M 2.0 Available Options & Part Identification* Example: F O5HS C B M 25.0 F O5HS C B M 25.0 Fox Model Number Voltage Stability Operating Frequency K = 1.8V5% A = 100 PPM Temperature H = 2.5V5% B = 50 PPM E = -10 to +70C C = 3.3V10% D = 25 PPM F = -20 to +70C E = 20 PPM M = -40 to +85C *Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. See stabilities and op temps for each VDD. Corporate Headquarters 5570 Enterprise Parkway Fort Myers, FL 33905 http://www.FOXONLINE.com Sales 1-888-GET-2-FOX (1-888-438-2369) or 1-239-693-0099 http://www.FOXONLINE.com/repdisty Tech Support http://www.FOXONLINE.com/email Product use: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of Fox Electronics' products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox Electronics or any third parties. Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of users. Anyone using a Fox Electronics product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics. Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective third-party owners. (c) Copyright 2019 Fox Electronics. All rights reserved Title / Description: O5HS SERIES STANDARD SPECIFICATIONS Drawing Number: O5HS-DOC-1 Size: A Part Number: Cage: 61429 Draftsperson: BEC Approved: MAJ Revision Date: 08/12/2019 Page 5 of 5