HCMOS 5.0x3.2mm SMD Oscillator O5HS DATASHEET
(Former F510L, F540L, F530L Series)
© Copyright 2019 Fox Electronics. All rights reserved
Title / Description:O5HS SERIES STANDARD SPECIFICATIONS
Drawing Number: O5HS-DOC-1 Size: A
Part Number: Cage: 61429
Draftsperson: BEC Approved: MAJ Revision Date: 08/12/2019
Page 1 of 5
•
HCMOS Output
•
Stabilities to ±20 PPM
•
Temperature Ranges as wide as -40ºC to +85ºC
•
Supply Voltages: 1.8V, 2.5V, 3.3V
1.8V ELECTRICAL CHARACTERISTICS
PARAMETERS MAX (unless otherwise noted)
Frequenc
y
Ran
g
e (FO) 1~ 160MHz
Stora
g
e Temperature Ran
g
e (TSTG) -55 ~ +125°C
Suppl
y
Volta
g
e (VDD) 1.8V±5%
Input Current (IDD)
1.000 ~ 32.000MHz
>32.000 ~ 70.000MHz
>70.000 ~ 120.000MHz
>120.000 ~ 160.000MHz
5mA
10mA
15mA
30mA
Standb
y
Current 10
µ
A
Output S
y
mmetr
y
(50% VDD) 40% ~ 60%
Rise/Fall Time (20%/80% VDD Levels) (TR/TF)
1.000 ~ 32.000MHz
>32.000 ~ 120.000MHz
>120.000 ~ 160.000MHz
5.0nS
3.5nS
3.0nS
Output Voltage (VOL)
(VOH)
20% VDD
80% VDD Min
Output Load (HCMOS) 15
p
F
Star
t
-up Time (TS) 10mS
Output Disable Time 1 30nS
Output Enable Time 1 10mS
• Available Options by Stability & Operating Temp for 1.8V
Frequency
Stability
Operating
Temperature (ºC) Frequency Range (MHz)
±100PPM2 -10 ~ +70 1.000 ~ 160.000
±100PPM2 -40 ~ +85 1.000 ~ 160.000
±50PPM2 -10 ~ +70 1.000 ~ 160.000
±
50
PPM2 -40 ~ +85 1.000 ~ 160.000
±25PPM2 -10 ~ +70 1.000 ~ 160.000
±25PPM3 -40 ~ +85 1.000 ~ 160.000
±20PPM3 -10 ~ +70 1.000 ~ 160.000
1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open.
2 Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, reflow, one-year aging, shock, and vibration.
3 Inclusive of 25°C tolerance, operating temperature range.
ENABLE / DISABLE FUNCTION
Pin1 Ou
t
put (pin 3)
OPEN 1 Active
‘1’ Level VIH 70%VDD Active
‘0’ Level VIL 30%VDD High Z
HCMOS 5.0x3.2mm SMD Oscillator O5HS DATASHEET
(Former F510L, F540L, F530L Series)
© Copyright 2019 Fox Electronics. All rights reserved
Title / Description:O5HS SERIES STANDARD SPECIFICATIONS
Drawing Number: O5HS-DOC-1 Size: A
Part Number: Cage: 61429
Draftsperson: BEC Approved: MAJ Revision Date: 08/12/2019
Page 2 of 5
2.5V ELECTRICAL CHARACTERISTICS
PARAMETERS MAX (unless otherwise noted)
Frequenc
y
Ran
g
e (FO) 1~ 160 MHz
Stora
g
e Temperature Ran
g
e (TSTG) -55 ~ +125°C
Suppl
y
Volta
g
e (VDD) 2.5V±5%
Input Current (IDD)
1.000 ~ 32.000MHz
>32.000 ~ 50.000MHz
>50.000 ~ 125.000MHz
>125.000 ~ 160.000MHz
7mA
12mA
26mA
35mA
Standb
y
Current 10
µ
A
Output Symmetry (50% VDD)
1.000 ~ 50.000MHz
> 50.000 ~ 160.000MHz
45% ~ 55%
40% ~ 60%
Rise/Fall Time (10%/90% VDD Levels) (TR/TF) 5nS
Output Voltage (VOL)
(VOH)
10% VDD
90% VDD Min
Output Load (HCMOS) 15
p
F
Star
t
-up Time (TS) 10mS
Output Disable Time 1 15 nS
Output Enable Time 1 10mS
• Available Options by Stability & Operating Temp for 2.5V
Frequency
Stability2
Operating
Temperature (ºC) Frequency Range (MHz)
±100PPM2 -10 ~ +70 1.000 ~ 160.000
±100PPM2 -40 ~ +85 1.000 ~ 160.000
±50PPM2 -10 ~ +70 1.000 ~ 160.000
±50PPM2 -40 ~ +85 1.000 ~ 160.000
±25PPM2 -10 ~ +70 1.000 ~ 160.000
±25PPM3 -40 ~ +85 1.000 ~ 160.000
±20PPM3 -10 ~ +70 1.000 ~ 160.000
1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open.
2 Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, reflow, one-year aging, shock, and vibration.
3 Inclusive of 25°C tolerance, operating temperature range.
ENABLE / DISABLE FUNCTION
Pin1 Ou
t
put (pin 3)
OPEN 1 Active
‘1’ Level VIH 70%VDD Active
‘0’ Level VIL 30%VDD High Z
HCMOS 5.0x3.2mm SMD Oscillator O5HS DATASHEET
(Former F510L, F540L, F530L Series)
© Copyright 2019 Fox Electronics. All rights reserved
Title / Description:O5HS SERIES STANDARD SPECIFICATIONS
Drawing Number: O5HS-DOC-1 Size: A
Part Number: Cage: 61429
Draftsperson: BEC Approved: MAJ Revision Date: 08/12/2019
Page 3 of 5
3.3V ELECTRICAL CHARACTERISTICS
PARAMETERS MAX (unless otherwise noted)
Frequency Range (FO) 1 ~ 170MHz
Storage Temperature Range (TSTG) -55 ~ +125°C
Supply Voltage (VDD) 3.3V±10%
Input Current (IDD)
1.000 ~ 32.000MHz
>32.000 ~ 50.000MHz
>50.000 ~ 67.000MHz
>67.000 ~ 170.000MHz
15mA
20mA
25mA
40mA
Standby Current 10µA
Output Symmetry (50% VDD)
1.000 ~ 50.000MHz
>50.000 ~ 170.000MHz
45% ~ 55%
40% ~ 60%
Rise/Fall Time (10%/90% VDD Levels) (TR/TF)
1.000 ~ 80.000MHz
>80.000 ~ 125.000MHz
>125.000 ~ 170.000MHz
6nS
4nS
3nS
Output Voltage (VOL)
(
VOH
)
10% VDD
90% VDD Min
Output Current (IOL)
(IOH)
2 mA Min
-2 mA Min
Output Load (HCMOS) 15pF
Start-up Time (TS) 10mS
Output Disable Time 1 150nS
Output Enable Time 1 10mS
• Available Options by Stability & Operating Temp for 3.3V
Frequency
Stability2
Operating
Temperature (ºC) Frequency Range (MHz)
±100PPM2 -10 ~ +70 1.000 ~ 170.000
±100PPM2 -20 ~ +70 1.000 ~ 170.000
±100PPM2 -40 ~ +85 1.000 ~ 170.000
±50PPM2 -10 ~ +70 1.000 ~ 170.000
±
50
PPM2 -20 ~ +70 1.000 ~ 170.000
±
50
PPM2 -40 ~ +85 1.000 ~ 170.000
±25PPM2 -10 ~ +70 1.000 ~ 170.000
±25PPM2 -20 ~ +70 1.000 ~ 170.000
±25PPM3 -40 ~ +85 1.000 ~ 170.000
±20PPM3 -10 ~ +70 1.000 ~ 170.000
±20PPM3 -20 ~ +70 1.000 ~ 170.000
1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open.
2 Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, reflow, one-year aging, shock, and vibration.
3 Inclusive of 25°C tolerance, operating temperature range.
ENABLE / DISABLE FUNCTION
Pin1 Ou
t
put (pin 3)
OPEN 1 Active
‘1’ Level VIH 70%VDD Active
‘0’ Level VIL 30%VDD High Z
HCMOS 5.0x3.2mm SMD Oscillator O5HS
DATASHEET
(Former F510L, F540L, F530L Series)
© Copyright 2019 Fox Electronics. All rights reserved
Title / Description:O5HS SERIES STANDARD SPECIFICATIONS
Drawing Number: O5HS-DOC-1 Size: A
Part Number: Cage: 61429
Draftsperson: BEC Approved: MAJ Revision Date: 08/12/2019
Page 4 of 5
DIMENSIONS / MECHANICAL SPECIFICATIONS
Notes:
*A 0.01μF capacitor should be placed between V
DD
(Pin 4) and GND (Pin2) to minimize power supply line noise.
*Dimensional drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary
Maximum Soldering Temp / Time 260°C / 10 Seconds x 2
Moisture Sensitivity Level (MSL) 1
Termination Finish Au over Ni
Seal Method Seam
Lead (Pb) Free Yes
ROHS/REACH Compliant Yes
HCMOS 5.0x3.2mm SMD Oscillator O5HS
DATASHEET
(Former F510L, F540L, F530L Series)
© Copyright 2019 Fox Electronics. All rights reserved
Title / Description:O5HS SERIES STANDARD SPECIFICATIONS
Drawing Number: O5HS-DOC-1 Size: A
Part Number: Cage: 61429
Draftsperson: BEC Approved: MAJ Revision Date: 08/12/2019
Page 5 of 5
Tape Specifications (millimeters) Reel Specifications (millimeters)
A B C D E F Std Reel Qty G H I J K L M
Ø1.5 4.0 8.0 5.5 12.0 1.5 1,000 2.0 Ø13 Ø21 Ø62 Ø180 13.5 2.0
Available Options & Part Identification*
Example: F O5HS C B M 25.0
F O5HS C B M 25.0
Fox Model Number Voltage
K = 1.8V±5%
H = 2.5V±5%
C = 3.3V±10%
Stability
A = ±100 PPM
B = ±50 PPM
D = ±25 PPM
E = ±20 PPM
Operating
Temperature
E
=
-10
to +
70
ºC
F = -20 to +70ºC
M
=
-40
to +
85
ºC
Frequency
*Not all frequencies in the frequency range, or every combination of stability, temp range, and voltage available. See stabilities and op temps for each V
DD
.
Corporate Headquarters
5570 Enterprise Parkway
Fort Myers, FL 33905
http://www.FOXONLINE.com
Sales
1-888-GET-2-FOX (1-888-438-2369)
or
1-239-693-0099
http://www.FOXONLINE.com/repdisty
Tech Support
http://www.FOXONLINE.com/email
Product use: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole
discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice.
Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to
perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any
kind, whether express or implied, including, but not limited to, the suitability of Fox Electronics' products for any particular purpose, an implied warranty
of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey
any license under intellectual property rights of Fox Electronics or any third parties.
Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar
devices where the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of
users. Anyone using a Fox Electronics product in such a manner does so at their own risk, absent an express, written agreement by Fox
Electronics.
Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other
trademarks and service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective
third-party owners.
