5-5
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com
5
4mm Flat Top
LED CBI
®
Circuit Board Indicator
Sloped Back Housing
550-6x07
5.2
[.205]
9.02 [.355]
4.10
[.162]
DIA.
5.28
[.208]
.560
[.022]
6.22
[.245]
3.00
[.118]
3.68
[.145]
6.22 [.245]
.508
[.020]
SQ.
1.09
[.043] RECOMMENDED
P.C. BOARD LAYOUT
2.54
[.100]
2.54
[.100]
CATHODE
CATHODE
I.D.
PART NO. COLOR
550-6207 Green
550-6307 Yellow
550-6407 Red
Features
• Multiple CBIs form horizontal LED arrays on 6.35mm
(0.250”) center-lines.
• Flat LED provides flush panel appearance and wide
viewing angle
• High Contrast, UL 94 V-0 rated, black housing
• Oxygen index: 32%
• Polymer content: PBT, 0.596 g
• Housing stand-offs facilitate PCB cleaning
• Solderability per MIL-STD-202F, method 208F
• LEDs are safe for direct viewing per IEC 825-1, EN-60825-1
• Compatible with 552-60xx-200
Tolerance note: As noted, otherwise:
• LED Protrusion: ±0.04 mm [±0.016]
• CBI Housing: ±0.02mm[±0.008]
Dimensions in mm [inches]
Peak I
V
V
F
Test Viewing LED
Part Number Color Wavelength nm mcd Volts Current (mA) Angle 2
ΘΘ½
Data sheet Page #
550-6207 Green 565 12.6 2.1 20 150° 521-9708 5-19
550-6307 Yellow 585 8.7 2.1 20 150° 521-9707 5-19
550-6407 Red 630 8.7 2 20 145° 521-9706 5-19
Typical Operating Characteristics (TA=25°C)
See LED data sheet for additional information
See Page 5-20 and 5-21 for Reference Only LED Drive Circuit Example
See Page 5-22 for Pin Out
5-19
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com
5
4mm Discrete LED
Flat Top
Tinted, Diffused
521-970x
3.99
[.157]
5.99 [.236]
26.42 [1.04] min
2.54
[.100
]
.508
[.020]
1.27 [.050]
2.54
[.100]
CATHODE
1.00 [.040]
PART NO. COLOR
521-9706 Red
521-9707 Yellow
521-9708 Green
Red Yellow Green
ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9706 -9707 -9708
Power Dssipation (mW) 100 60 100
Derating (mA/°C)
From 50°C
.4 .25 .4
Forward Current (mA) 30 20 30
Peak Current (mA) 120 80 120
Pulse width = 100µs
Operating Temperature (°C) -55/+100 -55/+100 -55/+100
Storage Temperature (°C) -55/+100 -55/+100 -55/+100
Soldering Temperature 260°C, 5 seconds, 1.6 mm from case
Red Yellow Green
OPERATING CHARACTERISTICS (TA=25°C) -9706 -9707 -9708
Luminous Intensity (mcd) Min. 2.5 5.6 8.7
IF=20mA Typical 8.7 8.7 12.6
Peak Wavelength (nm) Typical 630 585 565
λ Peak
Viewing Angle (2Θ ½) Typical 145° 150° 150°
Forward Voltage (V) Typical 2 2.1 2.1
IF=20mA Max. 2.8 2.8 2.8
Reverse Voltage (V), IR=100µA Min. 5 5 5
Dimensions in mm [inches]
Θ
is the off axis angle at which the luminous intensity is half the axial luminous intensity
Solder Adherence per MIL-STD-202E, Method 208C
