VS-15MQ040NPbF
www.vishay.com Vishay Semiconductors
Revision: 16-Feb-15 1Document Number: 94141
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Performance Schottky Rectifier, 1.5 A
FEATURES
Surface mountable
Extremely low forward voltage
Compact size
Improved reverse blocking voltage capability relative to
other similar size Schottky
Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
Designed and qualified for industrial level
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Switching power supplies
Meter protection
Reverse protection for power input to PC board circuits
Battery isolation and charging
Low threshold voltage diode
Freewheeling or by-pass diode
Low voltage clamp
DESCRIPTION
The VS-15MQ040NPbF Schottky rectifier is designed to be
used for low power applications where a reverse voltage of
40 V is encountered and surface mountable is required.
PRODUCT SUMMARY
Package DO-214AC (SMA)
IF(AV) 1.5 A
VR40 V
VF at IF0.43 V
IRM 20 mA at 125 °C
TJ max. 150 °C
Diode variation Single die
EAS 6.0 mJ
Cathode Anode
DO-214AC (SMA)
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
IF(AV) Rectangular waveform 1.5 A
VRRM 40 V
IFSM tp = 5 μs sine 330 A
VF2 Apk, TJ = 125 °C 0.43 V
TJRange -40 to +150 °C
VOLTAGE RATINGS
PARAMETER SYMBOL VS-15MQ040NPbF UNITS
Maximum DC reverse voltage VR40 V
Maximum working peak reverse voltage VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current
See fig. 4
IF(AV) 50 % duty cycle at TL = 105 °C, rectangular waveform
On PC board 9 mm2 island (0.013 mm thick copper pad area) 2.1
A
IF(AV) 50 % duty cycle at TL = 114 °C, rectangular waveform
On PC board 9 mm2 island (0.013 mm thick copper pad area) 1.5
Maximum peak one cycle
non-repetitive surge current
See fig. 6
IFSM
5 μs sine or 3 μs rect. pulse Following any rated load
condition and with rated
VRRM applied
330
A
10 ms sine or 6 ms rect. pulse 140
Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 1 A, L = 12 mH 6.0 mJ
Repetitive avalanche current IAR Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical 1.0 A
VS-15MQ040NPbF
www.vishay.com Vishay Semiconductors
Revision: 16-Feb-15 2Document Number: 94141
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Pulse width < 300 μs, duty cycle < 2 %
Note
(1) thermal runaway condition for a diode on its own heatsink
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum forward voltage drop
See fig. 1 VFM (1)
1 A TJ = 25 °C 0.42
V
2 A 0.49
1 A TJ = 125 °C 0.34
2 A 0.43
Maximum reverse leakage current
See fig. 2 IRM (1) TJ = 25 °C VR = Rated VR
0.5 mA
TJ = 125 °C 20
Threshold voltage VF(TO) TJ = TJ maximum 0.26 V
Forward slope resistance rt64.6 m
Typical junction capacitance CTVR = 10 VDC, TJ = 25 °C, test signal = 1 MHz 134 pF
Typical series inductance LSMeasured lead to lead 5 mm from package body 2.0 nH
Maximum voltage rate of change dV/dt Rated VR10 000 V/μs
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction and storage
temperature range TJ (1), TStg -40 to +150 °C
Maximum thermal resistance,
junction to ambient RthJA DC operation 80 °C/W
Approximate weight 0.07 g
0.002 oz.
Marking device Case style SMA (similar D-64) XF
dPtot
dTJ
------------- 1
RthJA
--------------<
VS-15MQ040NPbF
www.vishay.com Vishay Semiconductors
Revision: 16-Feb-15 3Document Number: 94141
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 2 - Typical Peak Reverse Current vs.Reverse Voltage
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
Fig. 4 - Maximum Average Forward Current vs.
Allowable Lead Temperature
Fig. 5 - Maximum Average Forward Dissipation vs.
Average Forward Current
Fig. 6 - Maximum Peak Surge Forward Current vs. Pulse Duration
Note
(1) Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
0.1
10
I
F
- Instantaneous Forward Current (A)
V
FM
- Forward Voltage Drop (V)
0.3 0.5 0.7 0.9
1
0.80.60.4
0.2
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
IR - Reverse Current (mA)
VR - Reverse Voltage (V)
01020
30
0.01
0.1
1
10
100
540
0.001
352515
TJ = 150 °C
TJ = 125 °C
TJ = 100 °C
TJ = 75 °C
TJ = 50 °C
TJ = 25 °C
CT - Junction Capacitance (pF)
VR - Reverse Voltage (V)
02030
40 45
100
1000
10
TJ = 25 °C
10
515 25 35
Allowable Case Temperature (°C)
IF(AV) - Average Forward Current (A)
0 2.0 3.01.0
30
50
70
110
150
0.5 1.5 2.5
90
130
Square wave (D = 0.50)
80 % rated VR applied
See note (1)
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
DC
140
120
100
80
60
40
0
0.4
1.0
1.6
Average Power Loss (W)
I
F(AV)
- Average Forward Current (A)
02.0 3.0
1.4
0.6
0.2
1.51.00.5 2.5
0.8 RMS limit
DC
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
1.2
I
FSM
- Non-Repetitive Surge Current (A)
t
p
- Square Wave Pulse Duration (µs)
100
1000
10 100 1000 10 000
At any rated load condition
and with rated V applied
following surge RRM
VS-15MQ040NPbF
www.vishay.com Vishay Semiconductors
Revision: 16-Feb-15 4Document Number: 94141
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORDERING INFORMATION TABLE
ORDERING INFORMATION (Example)
PREFERRED P/N PREFERRED PACKAGE CODE MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION
VS-15MQ040NTRPbF 5AT 7500 13" diameter plastic tape and reel
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95400
Part marking information www.vishay.com/doc?95403
Packaging information www.vishay.com/doc?95404
SPICE model www.vishay.com/doc?95273
2- Current rating (15 = 1.5 A)
3- M = SMA
4- Q = Schottky “Q” series
5- Voltage rating (040 = 40 V)
6- N = new SMA
7-TR = tape and reel
- PbF = lead (Pb)-free
8
1- Vishay Semiconductors products
Device code
51 32 4 6 7 8
VS- 15 M Q 040 N TR PbF
Document Number: 95400 For technical questions within your region, please contact one of the following: www.vishay.com
Revision: 09-Jul-10 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1
SMA
Outline Dimensions
Vishay Semiconductors
DIMENSIONS in inches (millimeters)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
15MQ040N 15MQ040NTR VS-15MQ040NPBF VS-15MQ040NTRPBF