MBRS320T3, MBRS330T3, MBRS340T3, MBRS360T3 Preferred Devices Surface Mount Schottky Power Rectifier . . . employing the Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity protection diodes, in surface mount applications where compact size and weight are critical to the system. * * * * * * Small Compact Surface Mountable Package with J-Bend Leads Rectangular Package for Automated Handling Highly Stable Oxide Passivated Junction Very Low Forward Voltage Drop (0.5 Volts Max @ 3.0 A, TJ = 25C) Excellent Ability to Withstand Reverse Avalanche Energy Transients Guardring for Stress Protection http://onsemi.com SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES 20, 30, 40, 60 VOLTS SMC CASE 403 PLASTIC Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 217 mg (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * * * MARKING DIAGRAM Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds Shipped in 16 mm Tape and Reel, 2500 units per reel Polarity: Notch in Plastic Body Indicates Cathode Lead Marking: B32, B33, B34, B36 YWW B3x B3x x Y W = Device Code = 2, 3, 4 or 6 = Year = Work Week MAXIMUM RATINGS Please See the Table on the Following Page ORDERING INFORMATION Device Package Shipping MBRS320T3 SMC 2500/Tape & Reel MBRS330T3 SMC 2500/Tape & Reel MBRS340T3 SMC 2500/Tape & Reel MBRS360T3 SMC 2500/Tape & Reel Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2000 October, 2000 - Rev. 3 1 Publication Order Number: MBRS340T3/D MBRS320T3, MBRS330T3, MBRS340T3, MBRS360T3 MAXIMUM RATINGS Symbol MBRS320T3 MBRS330T3 MBRS340T3 MBRS360T3 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 20 30 40 60 Volts Average Rectified Forward Current IF(AV) Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 80 80 TJ - 65 to +125 - 65 to +125 RJL 11 11 11 11 0.50 0.50 0.525 0.740 2.0 20 2.0 20 2.0 20 0.5 20 Operating Junction Temperature 3.0 @ TL = 100C 4.0 @ TL = 90C Amps 80 80 Amps C - 65 to +125 THERMAL CHARACTERISTICS Thermal Resistance -- Junction to Lead C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 1.) (iF = 3.0 A, TJ = 25C) VF Maximum Instantaneous Reverse Current (Note 1.) (Rated dc Voltage, TJ = 25C) (Rated dc Voltage, TJ = 100C) iR Volts mA 1. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%. http://onsemi.com 2 100 50 3 2 I R , REVERSE CURRENT (mA) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) MBRS320T3, MBRS330T3, MBRS340T3, MBRS360T3 TC = 100C 1 0.7 0.5 0.3 0.2 TC = 25C 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 2 1 0.5 75C 0.2 0.1 0.05 0.02 0.01 1.1 1.2 1.3 1.4 100C 25C 0 4 8 12 16 20 24 28 32 vF, INSTANTANEOUS VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Figure 2. Typical Reverse Current PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 0.07 0.05 TJ = 125C 20 10 5 5 4 IAV 2 SQUARE WAVE 10 (CAPACITIVE LOAD) IPK 40 5 TJ = 100C 3 36 DC = 20 1 0 0 1 2 3 4 5 IF(AV), AVERAGE FORWARD CURRENT (AMPS) 10 500 RATED VOLTAGE APPLIED RJC = 10.5C/W TJ = 125C 9 8 7 6 DC 5 4 3 SQUARE WAVE 2 TYPICAL CAPACITANCE AT 0 V = 480 pF 400 C, CAPACITANCE (pF) I F(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 3. Power Dissipation TJ = 25C 300 200 100 1 0 40 50 60 70 80 90 100 110 120 130 0 140 0 TC, CASE TEMPERATURE (C) 4 8 12 16 20 24 28 32 VR, REVERSE VOLTAGE (VOLTS) Figure 4. Current Derating (Case) Figure 5. Typical Capacitance http://onsemi.com 3 36 40 MBRS320T3, MBRS330T3, MBRS340T3, MBRS360T3 PACKAGE DIMENSIONS SMC PLASTIC PACKAGE CASE 403-03 ISSUE B S A D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P. B C K P J INCHES DIM MIN MAX A 0.260 0.280 B 0.220 0.240 C 0.075 0.095 D 0.115 0.121 H 0.0020 0.0060 J 0.006 0.012 K 0.030 0.050 P 0.020 REF S 0.305 0.320 MILLIMETERS MIN MAX 6.60 7.11 5.59 6.10 1.90 2.41 2.92 3.07 0.051 0.152 0.15 0.30 0.76 1.27 0.51 REF 7.75 8.13 H ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 4 MBRS340T3/D