SIL30C Series | 30A DC/DC Converter
C Class Non-Isolated
2
Characteristic Symbol Min Typ Max Units Notes and Conditions
Input voltage - turn on Vin (on) 8.5 9.0 9.5 V DC
Input voltage - turn off Vin (off) 7.1 7.6 8.1 V DC
Turn on delay - enabled, Tdelay 30 msec With the Remote ON/OFF signal
then power applied (power) asserted, this is the time from
when the input voltage reaches
the minimum specified operating
voltage until the POWER GOOD
is asserted high
Turn on delay - power Tdelay 30 msec Vin = Vin (nom), then Remote
applied, then Remote ON/OFF (Remote ON/OFF) ON/OFF asserted. This is the
asserted time taken until the POWER
GOOD is asserted high
Output to Power Good Tdelay 8 msec Output voltage in full regulation
delay to POWER GOOD asserted high
Rise time Trise 3msec From 10% to 90%; full resistive
load, 2 x 680µF external
capacitance
All specifications are typical at nominal input Vin = 12V, full load under any resistive load combination at 25˚C unless otherwise stated.
Characteristic Symbol Min Typ Max Units Notes and Conditions
Input voltage - operating Vin (oper) 10.2 12.0 13.8 V DC
Input current - no load lin 230 mADC Vin (min) - Vin (max), enabled
Input current - Quiescent lin (off) 30 mADC Converter disabled
Input voltage variation dv/dt 1.0 V/ms
Product was tested at 1.2V/ms.
Much higher dV/dt is possible
(>10V/ms). Consult factory for
details
Input Characteristics
Turn On/Off
Absolute Maximum Ratings
File Name: lF_SIL30C.PDF Rev (02): 15 Apr 2004
Characteristic Symbol Min Typ Max Units Notes and Conditions
Input voltage - continuous Vin (cont) -0.3 13.8 V DC Vin(+) - Vin(-)
Operating temperature Top 080ºCMeasured at thermal reference
points, see Note 1. Higher
ambient operation possible with
forced air cooling. See de-rating
curves
Power Good pull-up voltage 11 V
Storage temperature Tstorage -40 125 ºC
Output current Iout 0 30 A