KBPC10/15/25/35/50 Series Glass Passivated Single-Phase Bridge Rectifiers Voltage Range 50 to 1000 Volts Forward Current 10/15/25/35/50 Amperes Features Surge overload rating - 200~400 Amperes peak Low forward voltage drop Mounting Position: Any Electrically isolaged base - 1800 Volts Solderable 0.25" FASTON terminals Materials used carries U/L recognition Maximum Ratings and Electrical Characteristics Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbols K B PC K B PC K B PC K B PC K B PC K B PC 10005 1001 1002 1004 1006 1008 K B PC 1010 15005 1501 1502 1504 1506 1508 1510 25005 2501 2502 2504 2506 2508 2510 Units 35005 3501 3502 3504 3506 3508 3510 50005 5001 5002 5004 5006 5008 5010 100 200 400 600 800 1000 Volts Maximum recurrent peak reverse voltage VRRM 50 Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current at TC=55oC K B P C 10 K B P C 15 K B P C 25 K B P C 35 K B P C 50 Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) K B P C 10 K B P C 15 K B P C 25 K B P C 35 K B P C 50 Max. instantaneous forward voltage drop per element at K B P C 10 K B P C 15 K B P C 25 K B P C 35 K B P C 50 Maximum DC reverse current at rated DC blocking voltage per element TA=25oC TA=125oC IF=5.0A IF=7.5A IF=12.5A IF=17.5A IF=25.0A Operating temperature range Storage temperature range Notes: IF(AV) 10.0 15.0 25.0 35.0 50.0 Amps IFSM 200.0 300.0 300.0 400.0 400.0 Amps VF 1.2 Volts IR 10.0 500 uA TJ -55 to +125 o C -55 to +150 o C TSTG Also available on KBPC10W/15W/25W/35W/50W series 478 RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 479