JANTX2N2219AL - ON SEMICONDUCTOR - Datasheet.Directory

August, 2012 − Rev. 1

1Publication Order Number:

2N2219/D

2N2219, 2N2219A,

2N2219AL

Small Signal Switching

Transistor

NPN Silicon

Features

•MIL−PRF−19500/251 Qualified

•Available as JAN, JANTX, and JANTXV

MAXIMUM RATINGS (TA = 25°C unless otherwise noted)

Characteristic Symbol Value Unit

Collector−Emitter Voltage VCEO 50 Vdc

Collector−Base Voltage VCBO 75 Vdc

Emitter−Base Voltage VEBO 6.0 Vdc

Collector Current − Continuous IC800 mAdc

Total Power Dissipation @ TA = 25°C PT0.8 W

Total Power Dissipation @ TC = 25°C PT3.0 W

Operating and Storage Junction

Temperature Range

TJ, Tstg −65 to

+200

°C

THERMAL CHARACTERISTICS

Characteristic Symbol Max Unit

Thermal Resistance, Junction to Case RqJC 50 °C/W

Stresses exceeding Maximum Ratings may damage the device. Maximum

Ratings are stress ratings only. Functional operation above the Recommended

Operating Conditions is not implied. Extended exposure to stresses above the

Recommended Operating Conditions may affect device reliability.

http://onsemi.com

COLLECTOR

BASE

EMITTER

Device Package Shipping

ORDERING INFORMATION

JAN2N2219/A

JANTX2N2219/A TO−39 Bulk

JANTXV2N2219/A

TO−5

CASE 205AA

(2N2219AL)

TO−39

CASE 205AB

(2N2219, 2N2219A)

JAN2N2219AL

JANTX2N2219AL TO−5 Bulk

JANTXV2N2219AL

2N2219, 2N2219A, 2N2219AL

http://onsemi.com

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)

Characteristic Symbol Min Max Unit

OFF CHARACTERISTICS

Collector−Emitter Breakdown Voltage

(IE = 10 mAdc) 2N2219

2N2219A/AL

V(BR)CEO 30

−

Vdc

Emitter−Base Cutoff Current

(VEB = 5.0 Vdc) 2N2219

(VEB = 6.0 Vdc) 2N2219A/AL

(VEB = 4.0 Vdc) All

IEBO −

−

mAdc

nAdc

Collector−Emitter Cutoff Current

(VCE = 30 Vdc) 2N2219

(VCE = 50 Vdc) 2N2219A/AL

ICES −

−

nAdc

Collector−Base Cutoff Current

(VCB = 50 Vdc) 2N2219

(VCB = 60 Vdc) 2N2219

(VCB = 60 Vdc) 2N2219A/AL

(VCB = 75 Vdc) 2N2219A/AL

ICBO −

−

nAdc

mAdc

nAdc

mAdc

ON CHARACTERISTICS (Note 1)

DC Current Gain

(IC = 0.1 mAdc, VCE = 10 Vdc) 2N2219

2N2219A/AL

(IC = 1.0 mAdc, VCE = 10 Vdc) 2N2219

2N2219A/AL

(IC = 10 mAdc, VCE = 10 Vdc) 2N2219

2N2219A/AL

(IC = 150 mAdc, VCE = 10 Vdc) 2N2219/A/AL

(IC = 500 mAdc, VCE = 10 Vdc) 2N2219/A/AL

hFE 35

100

−

325

−

300

−

Collector−Emitter Saturation Voltage

(IC = 150 mAdc, IB = 15 mAdc) 2N2219

2N2219A/AL

(IC = 500 mAdc, IB = 50 mAdc) 2N2219

2N2219A/AL

VCE(sat) −

−

0.4

0.3

1.6

1.0

Vdc

Base−Emitter Saturation Voltage

(IC = 150 mAdc, IB = 15 mAdc) 2N2219

2N2219A/AL

(IC = 500 mAdc, IB = 50 mAdc) 2N2219

2N2219A/AL

VBE(sat) 0.6

0.6

−

1.3

1.2

2.6

2.0

Vdc

SMALL−SIGNAL CHARACTERISTICS

Magnitude of Small−Signal Current Gain

(IC = 20 mAdc, VCE = 20 Vdc, f = 100 MHz)

|hfe|

2.5 12

−

Small−Signal Current Gain

(IC = 1.0 mAdc, VCE = 10 Vdc, f = 1 kHz) 2N2219

2N2219A/AL

hfe 50

−

Output Capacitance

(VCB = 10 Vdc, IE = 0, 100 kHz ≤ f ≤ 1.0 MHz)

Cobo −8.0

Input Capacitance

(VEB = 0.5 Vdc, IC = 0, 100 kHz ≤ f ≤ 1.0 MHz)

Cibo −25

SWITCHING CHARACTERISTICS

Turn−On Time

(Reference Figure in MIL−PRF−19500/251) 2N2219

2N2219A/AL

ton −

−

Turn−Off Time

(Reference Figure in MIL−PRF−19500/251) 2N2219

2N2219A/AL

toff −

−

250

300

1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.

2N2219, 2N2219A, 2N2219AL

http://onsemi.com

PACKAGE DIMENSIONS

TO−5 3−Lead

CASE 205AA

ISSUE B

STYLE 1:

PIN 1. EMITTER

2. BASE

3. COLLECTOR

SEATING

PLANE

B0.007 (0.18MM) C M

DIM MIN MAX MIN MAX

INCHESMILLIMETERS

A0.350 0.3708.89 9.40

B0.315 0.3358.00 8.51

C0.240 0.2606.10 6.60

D0.016 0.0210.41 0.53

E0.009 0.1250.23 3.18

F0.016 0.0190.41 0.48

N0.200 BSC5.08 BSC

H0.028 0.0340.71 0.86

J0.029 0.0400.73 1.02

K1.500 1.75038.10 44.45

L0.250 ---6.35 ---

M45 BSC45 BSC

R0.054 BSC1.37 BSC

P--- 0.050--- 1.27

NOTES:

1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.

2. CONTROLLING DIMENSION: INCHES.

3. DIMENSION J MEASURED FROM DIAMETER A TO EDGE.

4. LEAD TRUE POSITION TO BE DETERMINED AT THE GUAGE

PLANE DEFINED BY DIMENSION R.

5. DIMENSION F APPLIES BETWEEN DIMENSION P AND L.

6. DIMENSION D APPLIES BETWEEN DIMENSION L AND K.

7. BODY CONTOUR OPTIONAL WITHIN ZONE DEFINED BY DIMEN

SIONS A, B, AND T.

8. DIMENSION B SHALL NOT VARY MORE THAN 0.010 IN ZONE P.

T--- 0.030--- 0.76

U0.100 ---2.54 ---

DETAIL X

NOTE 5

NOTES 4 & 6

DETAIL X

NOTE 7

LEAD IDENTIFICATION

DETAIL

2N2219, 2N2219A, 2N2219AL

http://onsemi.com

PACKAGE DIMENSIONS

TO−39 3−Lead

CASE 205AB

ISSUE A

STYLE 1:

PIN 1. EMITTER

2. BASE

3. COLLECTOR

SEATING

PLANE

B0.007 (0.18MM) C M

DIM MIN MAX MIN MAX

INCHESMILLIMETERS

A0.350 0.3708.89 9.40

B0.315 0.3358.00 8.51

C0.240 0.2606.10 6.60

D0.016 0.0190.41 0.48

E0.009 0.1250.23 3.18

F0.016 0.0190.41 0.48

N0.200 BSC5.08 BSC

H0.028 0.0340.71 0.86

J0.029 0.0400.73 1.02

K0.500 0.58012.70 14.73

L0.250 ---6.35 ---

M45 BSC45 BSC

R0.054 BSC1.37 BSC

P--- 0.050--- 1.27

NOTES:

1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.

2. CONTROLLING DIMENSION: INCHES.

3. DIMENSION J MEASURED FROM DIAMETER A TO EDGE.

4. LEAD TRUE POSITION TO BE DETERMINED AT THE GUAGE

PLANE DEFINED BY DIMENSION R.

5. DIMENSION F APPLIES BETWEEN DIMENSION P AND L.

6. DIMENSION D APPLIES BETWEEN DIMENSION L AND K.

7. BODY CONTOUR OPTIONAL WITHIN ZONE DEFINED BY DIMEN

SIONS A, B, AND T.

8. DIMENSION B SHALL NOT VARY MORE THAN 0.010 IN ZONE P.

T--- 0.030--- 0.76

U0.100 ---2.54 ---

DETAIL X

NOTE 5

NOTES 4 & 6

DETAIL X

NOTE 7

LEAD IDENTIFICATION

DETAIL

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,

copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC

reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any

particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without

limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications

and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC

does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for

surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where

personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and

its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,

any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture

of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

2N2219/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative