MFR-1150 Single Output Desolder System with Venturi Workstand The new MFR-1150 Desolder System with Venturi Workstand provides a shop air option for all MFR series power supplies. The MFR-1150 is a complete shop air desoldering system that includes a power supply, desolder hand-piece and venturi workstand. The MFR-UK5 Upgrade kit can also turn your existing MFR1100 or MFR-2200 series systems and older MFR-abc systems into a state-of-the-art desoldering system. The built in venturi provides 25 inHg (.85 Bar), which substantially increases desolder capability. The new hand-piece has been designed to be used in two configurations. The MFR-H5-DS can be used as a pencil or as a pistol style by simply adding a clip on grip supplied with the hand-piece. Solder collection capabilities have been increased by 40% from previous MFR desolder systems and the innovative replaceable collection chamber enables reduced downtime and quicker changeover. Key Features Venturi workstand Compatible for use with all MFR systems Uses existing DxP desolder cartridges and replaceable coil assembly (MFR-HDCA) Provides shop air option for all MFR series SYSTEM CONFIGURATIONS Part No. Description MFR-1150 Single Output Desolder System with External Air (Venturi Workstand) SYSTEM COMPONENTS Part No. Description MFR-PS1100 Single Output Power Supply MFR-H5-DS Desolder Hand-piece, Selectable, with cord MFR-WSDSX Universal Workstand with Venturi Box for Desolder Hand-piece MFR-FTKIT Fittings and Air Hose Kit AC-TC Tip cleaner UPGRADE KITS Part No. Description MFR-UK5 MFR-H5-DS Desolder Hand-piece and MFR-WSDSX Workstand MFR-PS1100 POWER SUPPLY Input Line Voltage: 100-240 VAC Input Line Frequency: 50/60Hz Power Consumption: 65 Watts max. Output Power: 60 Watts Max (RF Smart Power) Output Frequency: 450 KHz Dimensions (approx.) W x D x H 90mm x 200mm x 152.5mm (3.5" x 8" x MFR-1150 SYSTEM Idle Tip temperature stability: +/- 1.1C (2F) in still air Ambient Operating Temperature: 10 - 40C (50 - 104F) Maximum Enclosure Temperature: Tip to ground Potential <2mV Tip to ground resistance <2 Ohms Surface resistivity 105 - 109 Ohm Approvals cTUVus, CE MFR-H5-DS DESOLDER HAND-PIECE Power Cord (3-wire) 183cm (72") Solder Hand-piece cable length 152 cm (60"), burn proof, ESD safe Hand piece connector 8 pin power con MFR-WSDSX WORKSTAND Input voltage 24V Intput power 15W Workstand dimensions 100mm x 200mm x 140mm (4" x 8" x 5.5 Noise level < 55 dB Recommended Air pressure input 550kPa (80PSI) - Shop air only Vacuum suction force 0.85 bar (25" Hg SOLDER AND DESOLDER CARTRIDGES Hand-piece Cartridges MFR-H5-DS DxP Series Desoldering Cartridges Link CONSUMABLES AND SPARES Part No. Description MFR-DC10 Disposable Collection Chamber for MFR-H5-DS (pack of 10) MFR-DC100 Disposable Collection Chamber for MFR-H5-DS (pack of 100) MFR-HDCA Coil Assembly for MFR Desolder Hand-piece MFR-PG Replacement Pistol grip for MFR-H5-DS Hand-piece MFR-WSDSCB Desolder workstand cradle AC-SK1 Seal Kit Collection Chamber (pack of 2) AC-VP Vacuum Port AC-VL ESD Air Hose AC-Y10 Yellow sponge for WS1 Workstand (pack of 10) AC-BP Brass pad for WS1 Workstand (pack of 10) AC-VPF Vacuum Port Filter (pack of 5) LM-PS Power supply for MFR-WSDSX with multi plug adapters