MFR-1150 Single Output Desolder System with Venturi
Workstand
The new MFR-1150 Desolder System with Venturi Workstand provides a shop air option for all MFR
series power supplies.
The MFR-1150 is a complete shop air desoldering system that includes a power supply, desolder
hand-piece and venturi workstand. The MFR-UK5 Upgrade kit can also turn your existing MFR-
1100 or MFR-2200 series systems and older MFR-abc systems into a state-of-the-art desoldering
system.
The built in venturi provides 25 inHg (.85 Bar), which substantially increases desolder capability.
The new hand-piece has been designed to be used in two configurations. The MFR-H5-DS can be
used as a pencil or as a pistol style by simply adding a clip on grip supplied with the hand-piece.
Solder collection capabilities have been increased by 40% from previous MFR desolder systems
and the innovative replaceable collection chamber enables reduced downtime and quicker
changeover.
Key Features
Venturi workstand
Compatible for use with all MFR systems
Uses existing DxP desolder cartridges and replaceable coil assembly (MFR-HDCA)
Provides shop air option for all MFR series
SYSTEM CONFIGURATIONS
Part No. Description
MFR-1150 Single Output Desolder System with External Air (Venturi Workstand)
SYSTEM COMPONENTS
Part No. Description
MFR-PS1100 Single Output Power Supply
MFR-H5-DS Desolder Hand-piece, Selectable, with cord
MFR-WSDSX Universal Workstand with Venturi Box for Desolder Hand-piece
MFR-FTKIT Fittings and Air Hose Kit
AC-TC Tip cleaner
UPGRADE KITS
Part No. Description
MFR-UK5 MFR-H5-DS Desolder Hand-piece and MFR-WSDSX Workstand
MFR-PS1100 POWER SUPPLY
Input Line Voltage: 100-240 VAC
Input Line Frequency: 50/60Hz
Power Consumption: 65 Watts max.
Output Power: 60 Watts Max (RF SmartHeat®
Power)
Output Frequency: 450 KHz
Dimensions (approx.) W x D x H
90mm x 200mm x 152.5mm (3.5" x 8" x 6")
MFR-1150 SYSTEM
Idle Tip temperature stability:
+/- 1.1°C (2°F) in still air
Ambient Operating Temperature:
10 - 40°C (50 - 104°F)
Maximum Enclosure Temperature:
Tip to ground Potential <2mV
Tip to ground resistance <2 Ohms
Surface resistivity 105 – 109 Ohm
Approvals cTUVus, CE
MFR-H5-DS DESOLDER HAND-PIECE
Power Cord (3-wire) 183cm (72")
Solder Hand-piece cable length
152 cm (60"), burn proof, ESD safe
Hand piece connector 8 pin power connector
MFR-WSDSX WORKSTAND
Input voltage 24V
Intput power 15W
Workstand dimensions
100mm x 200mm x 140mm (4" x 8" x 5.5")
Noise level < 55 dB
Recommended Air pressure input
550kPa (80PSI) - Shop air only
Vacuum suction force 0.85 bar (25" Hg)
SOLDER AND DESOLDER CARTRIDGES
Hand-piece Cartridges
MFR-H5-DS DxP Series Desoldering Cartridges Link
CONSUMABLES AND SPARES
Part No. Description
MFR-DC10 Disposable Collection Chamber for MFR-H5-DS (pack of 10)
MFR-DC100 Disposable Collection Chamber for MFR-H5-DS (pack of 100)
MFR-HDCA Coil Assembly for MFR Desolder Hand-piece
MFR-PG Replacement Pistol grip for MFR-H5-DS Hand-piece
MFR-WSDSCB Desolder workstand cradle
AC-SK1 Seal Kit Collection Chamber (pack of 2)
AC-VP Vacuum Port
AC-VL ESD Air Hose
AC-Y10 Yellow sponge for WS1 Workstand (pack of 10)
AC-BP Brass pad for WS1 Workstand (pack of 10)
AC-VPF Vacuum Port Filter (pack of 5)
LM-PS Power supply for MFR-WSDSX with multi plug adapters
