100 Davids Drive, Hauppauge, NY 11788
TEL.: (631) 439-9220 • FAX: (631) 436-7430
e-mail: components@miteq.com • www.miteq.com
AM-1616-3000 051507
MITEQ AM-1616 SERIES AMPLIFIER
Gain (dB)
18
19
20
21
22
23
24
0.3 300 600 900 1200 1500 1800 2100 2400 2700 3000
Frequency (MHz)
Gain (dB)
Noise Figure (dB)
2.0
2.5
3.0
3.5
4.0
4.5
10 50 100 250 500 1000 1500 2000 2500 3000
Frequency (MHz)
Noise Figure
Output Third Order Intercept Point (+dBm)
13
15
17
19
21
23
25
27
0.1 0.3 1 10 50 100 500 1000 1500 2000 2500 3000
Frequency (MHz)
Third Order Intercept
Reverse Isolation (dB)
-40
-35
-30
-25
-20
0 300 600 900 1200 1500 1800 2100 2400 2700 3000
Frequency (MHz)
Isolation
Low Frequency Gain Rolloff (dB)
-6.0
-5.0
-4.0
-3.0
-2.0
-1.0
0.0
1.0
2 3 4 5 10 50 100 200 300
Frequency (KHz)
Gain Rolloff
Input & Output Return Loss (dBRL)
-40
-35
-30
-25
-20
-15
-10
-5
0
0.3 300 600 900 1200 1500 1800 2100 2400 2700 3000
Frequency (MHz)
dB Return Loss
Input
Output
Output -1dB Gain Compression (+dBm)
6
7
8
9
10
11
12
13
14
15
16
17
0.1 0.3 1 10 50 100 500 1000 1500 2000 2500 3000
Frequency (MHz)
P1dB
ISO 9001:2000 Certified • General Infomation • Warranty
GAIN VAR. IMPED. NOISE P1 dB NOM. DC
FREQUENCY MODEL (dB) (±dB) VSWR IN/OUT FIGURE (dBm) POWER OUTLINE
(MHz) NUMBER (Min.) (Max.) (Max.) (Ohms) (dB, Typ.) (Typ.) VOLTS (mA) NO.
0.01–1000 AM-1616-1000 20 0.5 2.0:1 50/50 3.2 14 15 60 1
0.01–2000 AM-1616-2000 20 0.75 2.0:1 50/50 3.4 14 15 60 1
0.01–2500 AM-1616-2500 20 1 2.0:1 50/50 3.5 12 15 60 1
0.01–3000 AM-1616-3000 20 2 2.0:1 50/50 3.5 11 15 60 1
100 Davids Drive, Hauppauge, NY 11788
TEL.: (631) 439-9220 • FAX: (631) 436-7430
e-mail: components@miteq.com • www.miteq.com
AM-1616-3000 051507
MITEQ AM-1616 SERIES AMPLIFIER
Freq.
(MHz)
Gain
(dB)
0.3 21.0
15 21.6
30 21.8
45 21.8
60 21.8
75 21.9
90 21.9
105 21.9
120 21.9
135 21.9
150 21.9
165 21.9
180 21.9
195 21.9
210 21.9
225 21.9
240 21.9
25521.9
270 21.9
285 21.9
30021.9
315 21.9
330 21.8
345 21.8
360 21.8
375 21.8
390 21.8
405 21.8
420 21.8
435 21.8
450 21.8
465 21.8
480 21.8
495 21.8
510 21.8
525 21.7
540 21.7
555 21.7
570 21.7
585 21.7
60021.7
615 21.7
630 21.7
645 21.7
660 21.6
675 21.6
690 21.6
705 21.6
720 21.6
735 21.6
750 21.6
765 21.6
780 21.6
795 21.5
810 21.5
825 21.5
840 21.5
Freq.
(MHz)
Gain
(dB)
85521.5
870 21.5
885 21.5
90021.5
915 21.5
930 21.5
945 21.5
960 21.5
975 21.5
990 21.5
1005 21.5
1020 21.5
1035 21.5
1050 21.5
1065 21.5
1080 21.5
1095 21.5
1110 21.5
1125 21.5
1140 21.5
1155 21.5
1170 21.5
1185 21.5
1200 21.5
1215 21.5
1230 21.5
1245 21.5
1260 21.6
1275 21.6
1290 21.6
1305 21.6
1320 21.6
1335 21.6
1350 21.6
1365 21.6
1380 21.6
1395 21.6
1410 21.6
1425 21.7
1440 21.7
1455 21.7
1470 21.7
1485 21.7
1500 21.7
1515 21.7
1530 21.7
1545 21.6
1560 21.6
1575 21.6
1590 21.6
1605 21.6
1620 21.6
1635 21.6
1650 21.6
1665 21.6
1680 21.6
1695 21.6
Freq.
(MHz)
Gain
(dB)
1710 21.6
1725 21.5
1740 21.5
1755 21.5
1770 21.5
1785 21.5
1800 21.5
1815 21.5
1830 21.5
1845 21.5
1860 21.5
1875 21.4
1890 21.4
1905 21.4
1920 21.4
1935 21.4
1950 21.4
1965 21.4
1980 21.4
1995 21.4
201021.4
2025 21.4
204021.4
2055 21.4
207021.4
2085 21.4
2100 21.4
2115 21.4
2130 21.4
2145 21.4
2160 21.4
2175 21.4
2190 21.3
2205 21.3
2220 21.3
2235 21.3
2250 21.3
2265 21.2
2280 21.2
2295 21.2
2310 21.2
2325 21.2
2340 21.1
2355 21.1
2370 21.1
2385 21.1
2400 21.0
2415 21.0
2430 21.0
2445 20.9
2460 20.9
2475 20.9
2490 20.8
250520.8
2520 20.8
253520.7
2550 20.7
Freq.
(MHz)
Gain
(dB)
256520.6
2580 20.6
259520.6
2610 20.5
2625 20.5
2640 20.4
2655 20.4
2670 20.3
2685 20.3
2700 20.3
2715 20.2
2730 20.2
2745 20.1
2760 20.1
2775 20.0
2790 20.0
2805 19.9
2820 19.9
2835 19.8
2850 19.8
2865 19.7
2880 19.7
2895 19.6
2910 19.6
2925 19.5
2940 19.4
2955 19.4
2970 19.3
2985 19.3
3000 19.2
100 Davids Drive, Hauppauge, NY 11788
TEL.: (631) 439-9220 • FAX: (631) 436-7430
e-mail: components@miteq.com • www.miteq.com
AM-1616-3000 051507
MITEQ AM-1616 SERIES AMPLIFIER
Freq.
(MHz)
Input
Return
Loss
(dB)
Output
Return
Loss
(dB)
0.3 -17 -21
15 -19 -16
30 -19 -16
45 -19 -16
60 -19 -16
75 -19 -16
90 -19 -17
105 -19 -17
120 -19 -17
135 -19 -17
150 -19 -17
165 -19 -17
180 -19 -17
195 -19 -17
210 -19 -17
225 -19 -17
240 -19 -18
255 -19 -18
270 -19 -18
285 -19 -18
300 -19 -18
315 -19 -18
330 -19 -19
345 -19 -19
360 -19 -19
375 -19 -19
390 -19 -19
405 -19 -19
420 -19 -20
435 -19 -20
450 -19 -20
465 -19 -20
480 -19 -20
495 -19 -21
510 -19 -21
525 -19 -21
540 -18 -21
555 -18 -22
570 -18 -22
585 -18 -22
600 -18 -23
615 -18 -23
630 -18 -23
645 -18 -23
660 -18 -24
675 -18 -24
690 -18 -24
705 -18 -25
720 -18 -25
735 -18 -25
750 -18 -26
765 -18 -26
780 -18 -27
795 -18 -27
810 -18 -27
Freq.
(MHz)
Input
Return
Loss
(dB)
Output
Return
Loss
(dB)
825 -18 -28
840 -18 -28
855 -18 -29
870 -18 -30
885 -17 -30
900 -17 -31
915 -17 -32
930 -17 -32
945 -17 -33
960 -17 -34
975 -17 -35
990 -17 -37
1005 -17 -37
1020 -17 -38
1035 -17 -38
1050 -17 -38
1065 -17 -37
1080 -17 -37
1095 -17 -36
1110 -17 -36
1125 -17 -35
1140 -17 -35
1155 -17 -35
1170 -17 -34
1185 -17 -34
1200 -17 -34
1215 -17 -33
1230 -17 -33
1245 -17 -33
1260 -17 -33
1275 -17 -33
1290 -17 -33
1305 -17 -33
1320 -17 -33
1335 -17 -33
1350 -17 -32
1365 -17 -32
1380 -17 -32
1395 -17 -32
1410 -17 -31
1425 -18 -31
1440 -18 -31
1455 -18 -31
1470 -18 -30
1485 -18 -30
1500 -18 -30
1515 -18 -29
1530 -18 -29
1545 -18 -28
1560 -18 -28
1575 -18 -28
1590 -18 -27
1605 -18 -27
1620 -18 -26
1635 -18 -26
1650 -18 -26
Freq.
(MHz)
Input
Return
Loss
(dB)
Output
Return
Loss
(dB)
1665 -18 -25
1680 -18 -25
1695 -18 -24
1710 -18 -24
1725 -18 -24
1740 -18 -23
1755 -18 -23
1770 -18 -23
1785 -18 -22
1800 -18 -22
1815 -18 -22
1830 -18 -22
1845 -18 -22
1860 -18 -21
1875 -18 -21
1890 -19 -21
1905 -19 -21
1920 -19 -20
1935 -19 -20
1950 -19 -20
1965 -19 -20
1980 -19 -20
1995 -20 -20
2010 -20 -20
2025 -20 -19
2040 -20 -19
2055 -21 -19
2070 -21 -19
2085 -21 -19
2100 -22 -19
2115 -22 -19
2130 -23 -19
2145 -23 -19
2160 -23 -18
2175 -24 -18
2190 -24 -18
2205 -25 -18
2220 -25 -18
2235 -26 -18
2250 -26 -18
2265 -27 -18
2280 -28 -17
2295 -29 -17
2310 -30 -17
2325 -30 -17
2340 -31 -17
2355 -32 -17
2370 -34 -17
2385 -35 -17
2400 -37 -16
2415 -39 -16
2430 -40 -16
2445 -42 -16
2460 -42 -16
2475 -41 -16
2490 -39 -15
Freq.
(MHz)
Input
Return
Loss
(dB)
Output
Return
Loss
(dB)
2505 -38 -15
2520 -36 -15
2535 -35 -15
2550 -33 -15
2565 -32 -15
2580 -31 -15
2595 -30 -15
2610 -30 -15
2625 -29 -14
2640 -28 -14
2655 -28 -14
2670 -27 -14
2685 -26 -14
2700 -26 -14
2715 -25 -14
2730 -25 -14
2745 -25 -14
2760 -24 -13
2775 -24 -13
2790 -24 -13
2805 -23 -13
2820 -23 -13
2835 -22 -13
2850 -22 -13
2865 -22 -13
2880 -22 -13
2895 -21 -13
2910 -21 -12
2925 -21 -12
2940 -21 -12
2955 -21 -12
2970 -20 -12
2985 -20 -12
3000 -20 -12
100 Davids Drive, Hauppauge, NY 11788
TEL.: (631) 439-9220 • FAX: (631) 436-7430
e-mail: components@miteq.com • www.miteq.com
AM-1616-3000 051507
MITEQ AM-1616 SERIES AMPLIFIER
Freq.
(MHz)
Reverse
Isolation
(dB)
0.3 -30
15 -30
30 -30
45 -30
60 -30
75 -30
90 -30
105 -30
120 -30
135 -30
150 -30
165 -30
180 -30
195 -30
210 -30
225 -30
240 -30
255 -30
270 -30
285 -30
300 -30
315 -30
330 -30
345 -30
360 -30
375 -30
390 -30
405 -30
420 -30
435 -30
450 -30
465 -30
480 -30
495 -30
510 -30
525 -30
540 -30
555 -30
570 -30
585 -30
600 -30
615 -30
630 -30
645 -30
660 -30
675 -30
690 -30
705 -30
720 -30
735 -30
750 -30
765 -30
780 -30
795 -31
810 -31
825 -31
Freq.
(MHz)
Reverse
Isolation
(dB)
840 -31
855 -31
870 -31
885 -31
900 -31
915 -31
930 -31
945 -31
960 -31
975 -31
990 -31
1005 -31
1020 -31
1035 -31
1050 -31
1065 -31
1080 -31
1095 -31
1110 -31
1125 -31
1140 -31
1155 -31
1170 -31
1185 -31
1200 -31
1215 -31
1230 -31
1245 -31
1260 -31
1275 -31
1290 -31
1305 -31
1320 -31
1335 -31
1350 -31
1365 -31
1380 -31
1395 -31
1410 -31
1425 -31
1440 -31
1455 -31
1470 -31
1485 -31
1500 -31
1515 -31
1530 -30
1545 -31
1560 -31
1575 -31
1590 -31
1605 -30
1620 -31
1635 -30
1650 -31
1665 -31
Freq.
(MHz)
Reverse
Isolation
(dB)
1680 -31
1695 -31
1710 -31
1725 -31
1740 -31
1755 -31
1770 -31
1785 -31
1800 -31
1815 -31
1830 -31
1845 -31
1860 -31
1875 -31
1890 -31
1905 -31
1920 -31
1935 -31
1950 -31
1965 -31
1980 -30
1995 -30
2010 -30
2025 -30
2040 -30
2055 -30
2070 -30
2085 -30
2100 -30
2115 -30
2130 -30
2145 -30
2160 -30
2175 -30
2190 -30
2205 -30
2220 -30
2235 -30
2250 -30
2265 -30
2280 -30
2295 -30
2310 -30
2325 -30
2340 -30
2355 -30
2370 -30
2385 -30
2400 -30
2415 -30
2430 -30
2445 -30
2460 -30
2475 -30
2490 -29
2505 -30
Freq.
(MHz)
Reverse
Isolation
(dB)
2520 -29
2535 -29
2550 -29
2565 -29
2580 -29
2595 -29
2610 -29
2625 -29
2640 -29
2655 -29
2670 -29
2685 -29
2700 -29
2715 -29
2730 -29
2745 -29
2760 -29
2775 -29
2790 -29
2805 -29
2820 -29
2835 -29
2850 -29
2865 -29
2880 -29
2895 -29
2910 -29
2925 -29
2940 -29
2955 -29
2970 -29
2985 -29
3000 -29
100 Davids Drive, Hauppauge, NY 11788
TEL.: (631) 439-9220 • FAX: (631) 436-7430
e-mail: components@miteq.com • www.miteq.com
AM-1616-3000 051507
MITEQ AM-1616 SERIES AMPLIFIER
Freq.
(MHz)
P1dB
(+dBm)
3ip
(+dBm)
Noise Figure
(dB)
0.1 13 25 ----
0.3 14 27 ----
1 14 27 ----
10 14 27 2.90
50 15 27 2.80
100 15 27 2.80
500 15 26 2.80
1000 13 25 2.90
1500 13 22 3.20
2000 12 19 3.40
2500 10 17 3.70
3000 7 16 3.80
100 Davids Drive, Hauppauge, NY 11788
TEL.: (631) 439-9220 • FAX: (631) 436-7430
e-mail: components@miteq.com • www.miteq.com
AM-1616-3000 051507
OPTIONS FOR BIPOLAR AMPLIFIERS
INPUT BIAS TEE
Add Suffix “-F”
Used to inject bias signal to photo diode or other type
of device. Check for availability on your model before
ordering. Available on most units operating above 1
MHz. Please contact MITEQ with your custom
requirements.
BIAS THROUGH THE OUTPUT CONNECTOR
Add Suffix “-1306/E” or “-1306/D”
Used to supply operating power when the amplifier
is remotely located while eliminating the need to run
a separate DC line. Specify whether existing power
pin should be “Enabled” or “Disabled.” To order, add
-1306/E or -1306/D after model number. Example:
AU-2A-0150-1306/E will have existing +15 V pin
enabled so that it can be used as a test point. Use
caution with this option since any voltage applied here
will also be present on the RF output center pin.
Available on most units operating above 1 MHz.
BIAS THROUGH THE OUTPUT CONNECTOR
WITH DC FEEDTHROUGH TO RF INPUT
Add Suffix “-1334/E” or “-1334/D”
Used to supply operating power when the amplifier is
remotely located and eliminates the need to run a
separate DC line. This DC voltage is then internally
fed to the RF input to power a remote LNA or other
low power equipment. Maximum current of external
load will vary with model type. Available on most units
operating above 1 MHz. Please contact factory prior
to ordering.
Specify whether existing power pin should be
“Enabled” or “Disabled”. To order, add “-1334/E” or “-1334/D”
after model number. Example: AU-2A-0150-1334/E
will have existing +15 V pin enabled so that it can be
used as a test point. Use caution with this option since
any voltage applied here will also be present on both
the RF output and input center pins.
TYPE N OR BNC CONNECTORS
Add Suffix “-N” or “-BNC”
Type N-female and type BNC-female are available for
all outlines 1 through 5, 12, 13 and 15 amplifiers. Add
connector type after model number. Examples: AU-2A-
0150-N; AU-2A-0150-BNC. Type N-male and mixed
connector types are also available on request. Please
call MITEQ with your specific requirements.
INPUT INTERNAL LIMITER
Add Suffix “-1103”
Available on models up to 500 MHz. Will protect the
input stage from CW signals as high as +30 dBm. To
order, add “-1103” after model number. Example:
AU-2A-0150-1103. Options are available for protec-
tion against short duration pulses up to 50 W.
AC POWER SUPPLY (100 to 240 VAC,
47 – 440 Hz). Add Suffix “-1179”
Available as an add-on to most models using outlines
1 through 5 and 15. Includes 6-foot line cord with
standard US line plug, internal fuse, on/off switch and
LED indicator light. Amplifier is permanently mounted
to power supply. To order, add “-1179” after model
number. Example: AU-2A-0150-1179. Refer to outline
12 for dimensions.
AC POWER SUPPLY (Wall plug-in unit)
Part Number “205531-19”
A low cost alternate to option “-1179”, the wall plug-in
unit is a small switching power supply capable of
delivering 1 amp at 15 volts.
AC POWER SUPPLY WITH SMC
CONNECTORS (Wall plug-in unit)
Part Number “-1179SC”
Same as above except has mating SMC connectors
on amplifier DC input and power supply DC output.
Available for outlines 1 through 10, 13 and 15.
ADDITIONAL OPTIONS AVAILABLE
OPTION SUFFIX
Gain Window -GW
Phase Match -PM
Amplitude Match -AM
Gain Control -GC
RF
INPUT
RF
OUTPUT
+V POWER
SUPPLY
BIAS
INPUT
100 Davids Drive, Hauppauge, NY 11788
TEL.: (631) 439-9220 • FAX: (631) 436-7430
e-mail: components@miteq.com • www.miteq.com
AM-1616-3000 051507
PRICING AND TERMS
A quotation on any item in the catalog is available by contacting the factory. All
quotations, unless otherwise noted, are valid for 60 days from the date of issue,
F.O.B. (FCA) Hauppauge, NY 11788. Pricing does not include customer or gov-
ernment source inspection unless otherwise noted. On international orders, an
irrevocable letter of credit may be required. MITEQ accepts these credit cards:
QUANTITY DISCOUNTS
A quantity discount is generally available on most catalog items. Due to the
wide variety of devices in the catalog, it is not possible to provide a standard discount schedule. When quantities are involved,
please contact the factory and the appropriate information will be provided.
SOURCE INSPECTION
Government / customer source inspection is available on any item upon receipt of the complete written confirmation of purchase
order items, including the prime government contract number. Source inspection with respect to some products increases the
unit price and extends delivery because of duplicate standard final inspection and testing. It is recommended wherever possi-
ble that a Certificate of Compliance be substituted for source inspection to minimize price and delivery delays.
SHIPPING INFORMATION
Unless instructed otherwise by the customer, we will ship UPS in the U.S. F.O.B. (FCA) Hauppauge. Air freight will be used as
the primary international means of shipment. Please indicate at time of purchase what method of shipment you require.
RETURNED MATERIAL
When returning material for repair or replacement, please ensure that there is complete information included with the shipment,
giving a detailed description of the reason for its return, the date and purchase order on which it was obtained, and the exact
address to which the material is to be reshipped. All returns must arrive freight, postage, duties and handling prepaid.
REPAIR COSTS
Warranty repairs will be made at no cost to the customer. Units out of warranty, or those which have been mishandled, will
require approval by the customer for the charges involved before the repairs can be accomplished. We will provide an estimate
for the cost of the repair, which can be applied to the repair, if approval is granted. For those items that are deemed beyond
repair, or where the customer may decide not to repair the unit, an evaluation fee and handling charge will be applicable.
APPLICATION ENGINEERING
We maintain a large support staff of engineers who are experts in specific areas of microwave technology. Each has an engi-
neering background that combines both a formal engineering education with training and experience in product design. As
further technical support, we make available the services of our engineering and scientific staff, who may be consulted on
more advanced circuit designs or application problems.
DRAWINGS AND SPECIFICATIONS
The material presented in this catalog was current at the time of publication. MITEQ Inc.’s continuing product improvement pro-
gram makes it necessary to reserve the right to change our mechanical and electrical specifications without notice. If either of
these parameters is critical, please contact the factory to verify that the information is current.
GENERAL INFORMATION
ADDITIONAL INFORMATION
Welcome
Cards
®
MasterCard
®
®
®
MITEQ FEDERAL SUPPLY CODE
Our Federal Supply Code is: 33592
WARRANTY ISO 9001:2000 Certified
