120W Single Output Power Supply or Battery Charger PA / P B - 1 2 0 series : TUV Rheinland Product Safety geprUfre Sicherheit S:Power Supply A:Voltage detector B:Current detector P A 120 P 13 C :O.D.M. number P:Open P.C.B. C:With case 13:13.8V 27:27.6V 54:55.2V P:With PFC N:None PFC SPECIFICATION MODEL OUTPUT PA/PB-120-13 PA/PB-120-27 PA/PB-120-54 DC VOLTAGE 13.8V 27.6V 55.2V RATED CURRENT 7.2A 4.3A 2.2A CURRENT RANGE 0 ~ 7.2A 0 ~ 4.3A 0 ~ 2.2A RATED POWER 99.36W 118.68W 121.44W LED INDICATED INPUT PA series voltage 105%1%: RED / 105%1%:GREEN PB series load 46%10%: GREEN / 46%10%:RED VOLTAGE RANGE 88 ~ 132VAC / 176 ~ 264VAC selected by switch FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) >0.65 (with PFC series) 248 ~ 370VDC EFFICIENCY (Typ.) 73% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 3A/115VAC 1.5A/230VAC COLD START 25A/115VAC LEAKAGE CURRENT <1.5mA / 240VAC OVERLOAD 90 ~ 110% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. 79% 50A/230VAC 15 ~ 17V 30 ~ 35V 60 ~ 66V Protection type : Hiccup mode, recovers automatically after fault condition is removed RTH27010 detect on RTH2 thermistor Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -10 ~ +45 (Refer to "Derating Curve") WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 20 ~ 90% RH non-condensing SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION UL60950-1, TUV EN60950-1, EN60335, EN60335-1, EN60335-2-29 approved I/P-O/P:3KVAC I/P-FG:2.0KVAC O/P-FG:0.5KVAC OTHERS NOTE -20 ~ +85, 10 ~ 95% RH 0.05%/ (0 ~ 45) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF DIMENSION 149.6K hrs min. PACKING 79% MIL-HDBK-217F (25) PCB Type:144*90*33mm External case type:180*96*49mm (L*W*H) External case type: 1.1Kg; 16pcs / 17.9Kg / 1.47CUFT(without PFC) 1.24Kg; 16pcs / 20.1Kg / 1.47CUFT(with PFC) PCB Type : 0.36Kg; 36pcs / 14Kg / 1.64CUFT(without PFC) 0.5Kg; 36pcs / 19Kg / 1.64CUFT(with PFC) File Name:PA,PB-120-SPEC 2017-09-05 120W Single Output Power Supply or Battery Charger PA / P B - 1 2 0 Mechanical Specification Case No. PS-120A series Unit:mm 3 pin XLR 1 2 3 115 FUSE CASE: Output cable length=183cm5cm Pin No. 1 2,3 Assignment DC OUTPUT +V DC OUTPUT -V Pin No. 1 2 3 Assignment AC/L No Pin AC/N 49 PCB: AC Input Connector (CN1) : JST B3P-VH or equivalent Mating Housing Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent 180 144 4- 134 3. 5 8 12VDC FAN Output Connector (CN4) : JST B2B-XH or equivalent Assignment +V -V Mating Housing JST XHP or equivalent ADJ. Terminal CN4 JST SXH-001T-P0.6 or equivalent F4A/250V Pin No. 1 2 CN3 +V JST SVH-21T-P1.1 or equivalent -V Terminal JST VHR or equivalent 1 2 3 4 Mating Housing 80 Assignment -V +V 90 Pin No. 1,2 3,4 5 DC Output Connector (CN3) : JST B4P-VH or equivalent LED 12 +CN5 1 2 3 SHORT FOR 115V OPEN FOR 230V CN1 Assignment Short Open Mating Housing Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent 2 max. Switch 115V 230V 33 115/230V selected by switch Connector (CN5) : JST B2P-VH or equivalent Derating Curve Charging Curve Vout 105% 100% 100 Charging Current Open frame series 17.8CFM air cooling (L=15cm face HS) 80 Iout Bat. Voltage 100% 45% Other series LOAD (%) 60 Red LED COLOR Green T Type A:Voltage detecter,pulse charger 40 Vout 105% 100% Iout Bat. Voltage 20 Charging Current -10 0 10 20 30 40 50 AMBIENT TEMPERATURE () 60 100% (HORIZONTAL) LED COLOR Red Green Type B:Current detecter,2 voltage section T File Name:PA,PB-120-SPEC 2017-09-05