J SUFFIX
CERAMIC
CASE 632-08
N SUFFIX
PLASTIC
CASE 646-06
D SUFFIX
SOIC
CASE 751A-02
14 1
14 1
14 1
ORDERING INFORMATION
MC54FXXJ Ceramic
MC74FXXN Plastic
MC74FXXD SOIC
MC54/74F04
HEX INVERTER
FAST SCHOTTKY TTL
4-6
FAST AND LS TTL DATA
HEX INVERTER
1314 12 11 10 9 8
21 3 4 5 6 7
GND
VCC
GUARANTEED OPERATING RANGES
Symbol Parameter Min Typ Max Unit
VCC Supply Voltage 54, 74 4.5 5.0 5.5 V
TAOperating Ambient Temperature Range 54 –55 25 125 °C
74 0 25 70
IOH Output Current — High 54, 74 –1.0 mA
IOL Output Current — Low 54, 74 20 mA
4-7
FAST AND LS TTL DATA
MC54/74F04
DC CHARACTERISTICS OVER OPERATING TEMPERATURE RANGE (unless otherwise specified)
Limits
Symbol Parameter Min Typ Max Unit Test Conditions
VIH Input HIGH Voltage 2.0 V Guaranteed Input HIGH Voltage
VIL Input LOW Voltage 0.8 V Guaranteed Input LOW Voltage
VIK Input Clamp Diode Voltage –1.2 V VCC = MIN, IIN = –18 mA
VOH Output HIGH Voltage 54, 74 2.5 V IOH = –1.0 mA VCC = 4.50 V
74 2.7 V IOH = –1.0 mA VCC = 4.75 V
VOL Output LOW Voltage 0.5 V IOL = 20 mA VCC = MIN
IIH Input HIGH Current 20 µA VCC = MAX, VIN = 2.7 V
0.1 mA VCC = MAX, VIN = 7.0 V
IIL Input LOW Current –0.6 mA VCC = MAX, VIN = 0.5 V
IOS Output Short Circuit Current (Note 2) –60 –150 mA VCC = MAX, VOUT = 0 V
ICC Power Supply Current
Total, Output HIGH 4.2 mA VCC = MAX, VIN = GND
Total, Output LOW 15.3 mA VCC = MAX, VIN = Open
NOTES:
1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable device type.
2. Not more than one output should be shorted at a time, nor for more than 1 second.
AC CHARACTERISTICS
54/74F 54F 74F
TA = +25°C TA = –55°C to +125°C TA = 0°C to 70°C
VCC = +5.0 V VCC = 5.0 V ± 10% VCC = 5.0 V ± 10%
CL = 50 pF CL = 50 pF CL = 50 pF
Symbol Parameter Min Max Min Max Min MAX Unit
tPLH Propagation Delay 2.4 5.0 2.0 7.0 2.4 6.0 ns
tPHL Propagation Delay 1.5 4.3 1.5 6.5 1.5 5.3 ns
