COPAL ELECTRONICS SINGLE TURN CERMET TRIMMERS RoHS compliant RJ-6 INTERNAL STRUCTURE 1 2 !0 3 4 5 9 6 7 Part name FEATURES RoHS compliant Wide resistance range from 10 to 5 M Low contact resistance variation (1 % maximum) Precious metal alloy wiper 8 Material Flammability 1 Rotor PBT(Polybutyleneterephthalate) UL-94HB 2 Cover Stainless steel -- 3 "O" ring Silicone rubber UL-94HB 4 Electrode Ag-Pd cermet 5 Resistive element RuO2 cermet 6 Base element Ceramic 7 Terminal pin Nickel, Gold-plated 8 Adhesive 9 Wiper Multi metal alloy !0 Rubber cushion Silicone rubber -- Epoxy PART NUMBER DESIGNATION R J - 6 P 1 0 k ( 1 0 3 ) Series name Resistance code Product shape PTop adjustment WTop adjustment FRear adjustment Resistance value SSide adjustment XSide adjustment Please refer to the LIST OF PART NUMBERS when placing orders. Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. COPAL ELECTRONICS RJ-6 CERMET TRIMMERS LIST OF PART NUMBERS Adjustment position Shape of terminal (Top view) 1 A 10 A 20 Form of packaging Plastic bag 3 3 1 3 3 1 20 k A 25 k 50 k 100 k 200 k A250 k 500 k 50 pcs./pack A Nominal resistance range Resistance tolerance RJ-6F 10 ~ 5 M 10 % 0.5 W (70 C) 0 W (120 C) Resistance law Linear law Maximum input voltage DC200 V or power rating, whichever is smaller Maximum wiper current 100 mA or power rating, whichever is smaller Effective electrical angle 230 (1 turn) 1 M 2 M A 5 M The products indicated by A mark are manufactured upon receipt of order basis. Mechanical angle 270 (1 turn) Operating torque 2~ 15 mN*m {20 ~ 153 gf*cm} Rotational life Terminal to strength 10 N {1.02 kgf} minimum Solderability 245 3 C, 2 ~ 3 s { }Reference only ENVIRONMENTAL CHARACTERISTICS Test item C.R.V. 1 % or 3 , whichever is greater Thermal shock 10 , 20, 5 M : 250 10-6/C maximum 50 ~ 2 M : 100 10-6/C maximum Humidity Shock Test conditions Specifications -65 ~ 125 C (0.5 h), 5 cycles -10 ~ 65 C (80 ~ 98 %), 10 cycles, 240 h 981 m/s2, 6 ms 6 directions for 3 times each [R/R 1 %] [S.S. 1 %] Vibration Amplitude 1.52 mm or Acceleration 196 m/s2, 10 ~ 2000 Hz, 3 directions, 12 times each Load life 70 C, 0.5 W, 1000 h 1000 M minimum (DC500 V) AC900 V, 60 s Approx. 0.60 g (RJ-6P,W) Approx. 0.80 g (RJ-6S, X) Approx. 1.01 g (RJ-6F) 200 cycles 10 ~ 200 [R/R (0.5 +3 %)] 500 ~ 5 M [R/R (0.5 +2 %)] 10 N {1.02 kgf} minimum Tensile strength Thrust rotor 1 % or 2 , whichever is greater - 55 ~ 120 C 50 mN*m {510 gf*cm} minimum Stop strength End resistance Net weight 10 k MECHANICAL CHARACTERISTICS Power ratings Dielectric strength 5 k 1 ELECTRICAL CHARACTERISTICS Insulation resistance 2 k RJ-6W 2 Temp. coefficient 1 k RJ-6X Rear adjustment Operating temp. range 500 The above part numbers are all available with the respective combination of <Nominal resistance values> (Fig. 1). Verify the above part numbers when placing orders. RJ-6S 2 3 200 Fig. 1 2 Side adjustment (Adjustment direction) 100 RJ-6P 2 1 50 Pieces in package 2 Top adjustment Nominal resistance values Low temp. operation -55 C, 2 h High temp. exposure 120 C, 250 h Immersion seal Soldering heat 85 C, 60 s Flow soldering : 260 3 C, 5 ~ 6 s, two times maximum Manual soldering : 380 10 C, 3 ~ 4 s [R/R 1 %] [R/R 1 %] [S.S. 1 %] [R/R 2 %] [S.S. 1 %] [R/R 1 %] [S.S. 2 %] [R/R 2 %] [S.S. 2 %] No leaks (No continuous bubbles) [R/R 1 %] R/RChange in total resistance S.S. Setting stability Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. COPAL ELECTRONICS RJ-6 CERMET TRIMMERS MAXIMUM INPUT RATINGS Nominal resistance values () A A A A A Resistance code Maximum input voltage (V) Maximum wiper current (mA) 10 20 50 100 200 500 100 200 500 101 201 501 1.00 2.00 5.00 7.07 10.0 15.8 100 100 100 70.7 50.0 31.6 1k 2k 5k 10 k 20 k 25 k 50 k 102 202 502 103 203 253 503 22.4 31.6 50.0 70.7 100 112 158 22.4 15.8 10.0 7.07 5.00 4.48 3.16 100 k 200 k 250 k 500 k 1M 2M 5M 104 204 254 504 105 205 505 200 200 200 200 200 200 200 2.00 1.00 0.80 0.40 0.20 0.10 0.04 OUTLINE DIMENSIONS The products indicated by A mark are manufactured upon receipt of order basis. Unless otherwise specified, tolerance: 0.3 (Unit: mm) RJ-6P Top adjustment 1 0.5 W x 2.6 L x 0.8 D Resistance code & Production date code 3 - 0.40.05 CW rotation 270 Nom. 7 +0.3 0 2.5 2 0.5 W x 2.6 L x 0.8 D Resistance code & Production date code 72 2.5 2.5 3 3 - 0.40.05 1 2 270 Nom. 1.30.2 ) 2.5 5.3 5.8 RJ-6S Side adjustment 0.50.2 7 +0.3 0 ( 72 3 1 Resistance code & Production date code Adjustment 2 62 0.5 2.5 2.5 7 +0.4 0 1.10.2 2.5 8.7 +0.3 0 5.2 0.6 0.5 W x 2.6 L x 0.8 D 270 Nom. Pin pitch in W type is different from P type. 3.5 6.6+0.4 -0.1 5.3 5.8 RJ-6W Top adjustment 1 3 2 3 - 0.40.05 3 Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. COPAL ELECTRONICS RJ-6 CERMET TRIMMERS OUTLINE DIMENSIONS Unless otherwise specified, tolerance: 0.3 (Unit: mm) RJ-6X Side adjustment 1 Resistance code & Production date code 3 2 8.52 0.5 2.5 2.5 7 +0.4 0 3 - 0.40.05 Pin position & stopper position of X type are different from S type. 1 RJ-6F Rear adjustment Semi-standard products 4.4 2 5.52 7.6 0.6 4.4 10.5 max. 4.4 1.10.2 2.5 8.7 +0.3 0 5.2 0.6 2 6.6+0.4 -0.1 270 Nom. 0.5 W x 2.6 L x 0.8 D 3 CW rotation Adjustment 3 1 270 Nom. 3 - 0.40.05 Resistance code & Production date code 0.5 W x 2.6 L x 0.8 D PACKAGING SPECIFICATIONS <Bulk pack specifications> Unit of bulk pack in a plastic bag is 50 pcs. per pack. Boxing of bulk in a plastic bag is performed with 200 pcs. (RJ-6F is 100 pcs.) per box. Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.