DDTA (R1 = R2 SERIES) UA PNP PRE-BIASED SMALL SIGNAL SURFACE MOUNT TRANSISTOR Features * * * * * A Epitaxial Planar Die Construction Complementary NPN Types Available (DDTC) Built-In Biasing Resistors, R1 = R2 Lead Free/RoHS Compliant (Note 2) "Green" Device, Note 3 and 4 SOT-323 B C Mechanical Data * * * * * * * * * * Case: SOT-323 Case Material: Molded Plastic, "Green" Molding Compound, Note 4. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminal Connections: See Diagram Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). Marking Information: See Page 4 Type Code: See Table Below Ordering Information: See Page 4 Weight: 0.006 grams (approximate) G H K M J D L E Dim Min Max A 0.25 0.40 B 1.15 1.35 C 2.00 2.20 D 0.65 Nominal E 0.30 0.40 G 1.20 1.40 H 1.80 2.20 J 0.0 0.10 K 0.90 1.00 L 0.25 0.40 M 0.10 0.18 0 8 All Dimensions in mm OUT 3 C R1, R2 (NOM) 2.2K 4.7K 10K 22K 47K 100K Type Code P04 P08 P13 P17 P20 P24 IN B R1 E 2 GND(+) IN GND (+) Equivalent Inverter Circuit @TA = 25C unless otherwise specified Characteristic Supply Voltage, (3) to (2) Input Voltage, (1) to (2) Output Current Output Current DDTA123EUA DDTA143EUA DDTA114EUA DDTA124EUA DDTA144EUA DDTA115EUA DDTA123EUA DDTA143EUA DDTA114EUA DDTA124EUA DDTA144EUA DDTA115EUA All Symbol Value Unit VCC V IC (Max) -50 +10 to -12 +10 to -30 +10 to -40 +10 to -40 +10 to -40 +10 to -40 -100 -100 -50 -30 -30 -20 -100 VIN IO Power Dissipation Thermal Resistance, Junction to Ambient Air (Note 1) Operating and Storage Temperature Range Notes: C OUT 3 E 1 Schematic and Pin Configuration Maximum Ratings 1 R2 2 P/N DDTA123EUA DDTA143EUA DDTA114EUA DDTA124EUA DDTA144EUA DDTA115EUA B V mA mA Pd 200 mW RJA 625 C/W Tj, TSTG -55 to +150 C 1. Mounted on FR4 PC Board with recommended pad layout as shown on Diodes Inc., suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf 2. No purposefully added lead. 3. Diodes Inc.'s "Green" Policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 4. Product manufactured with date code 0627 (week 27, 2006) and newer are built with Green Molding Compound. Product manufactured prior to date code 0627 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DS30325 Rev. 8 - 2 1 of 4 www.diodes.com DDTA (R1 = R2 SERIES) UA (c) Diodes Incorporated Electrical Characteristics @TA = 25C unless otherwise specified Characteristic Symbol Min Typ Max Unit Vl(off) -0.5 -1.1 V Input Voltage Output Voltage Input Current DDTA123EUA DDTA143EUA DDTA114EUA DDTA124EUA DDTA144EUA DDTA115EUA Output Current DC Current Gain Input Resistor (R1) Tolerance Resistance Ratio Gain-Bandwidth Product* DDTA123EUA DDTA143EUA DDTA114EUA DDTA124EUA DDTA144EUA DDTA115EUA Test Condition VCC = 5V, IO = 100A VO = 0.3V, IO = 20mA, DDTA123EUA VO = 0.3V, IO = 20mA, DDTA143EUA VO = 0.3V, IO = 10mA, DDTA114EUA VO = 0.3V, IO = 5mA, DDTA124EUA VO = 0.3V, IO = 2mA, DDTA144EUA VO = 0.3V, IO = 1mA, DDTA115EUA IO/Il =10mA/0.5mA, DDTA123EUA IO/Il =10mA/0.5mA, DDTA143EUA IO/Il =10mA/0.5mA, DDTA114EUA IO/Il =10mA/0.5mA, DDTA124EUA IO/Il =10mA/0.5mA, DDTA144EUA IO/Il =5mA/0.25mA, DDTA115EUA Vl(on) -1.9 -3 V VO(on) -0.1 -0.3 V mA VI = -5V A VCC = -50V, VI = 0V VO = -5V, IO = -20mA VO = -5V, IO = -10mA VO = -5V, IO = -5mA VO = -5V, IO = -5mA VO = -5V, IO = -5mA VO = -5V, IO = -5mA Il -3.8 -1.8 -.88 -.36 -.18 -.15 IO(off) 0.5 Gl -20 -20 -30 -56 -68 -82 R1 -30 +30 % R2/R1 0.8 1 1.2 fT 250 V = -10V, IE = 5mA, MHz CE f = 100MHz * Transistor - For Reference Only DS30325 Rev. 8 - 2 2 of 4 www.diodes.com DDTA (R1 = R2 SERIES) UA (c) Diodes Incorporated Typical Curves -DDTA143EUA 1 VCE(SAT), COLLECTOR EMITTER VOLTAGE (V) Pd, POWER DISSIPATION (mW) 250 200 150 100 50 0 -50 0 50 100 TA, AMBIENT TEMPERATURE (C) Fig. 1 Derating Curve IC/IB = 10 -25C 25C 0.01 0.001 0 150 75C 0.1 40 10 20 30 IC, COLLECTOR CURRENT (mA) Fig. 2 VCE(SAT) vs. IC 50 12 1,000 f = 1MHz COB, CAPACITANCE (pF) hFE, DC CURRENT GAIN 10 100 10 8 6 4 2 0 0 1 1 10 IC, COLLECTOR CURRENT (mA) Fig. 3 DC Current Gain 100 30 10 100 VO = 5V 75C VO = 0.2V 25C 10 Vin, INPUT VOLTAGE (V) IC, COLLECTOR CURRENT (mA) 10 15 25 5 20 VR, REVERSE BIAS VOLTAGE (V) Fig. 4 Output Capacitance -25C 1 0.1 1 0 0.01 0 8 9 6 7 3 4 5 Vin, INPUT VOLTAGE (V) Fig. 5 Collector Current vs. Input Voltage 1 DS30325 Rev. 8 - 2 2 0 10 3 of 4 www.diodes.com 10 20 30 40 IC, COLLECTOR CURRENT (mA) Fig. 6 Input Voltage vs. Collector Current 50 DDTA (R1 = R2 SERIES) UA (c) Diodes Incorporated Ordering Information (Note 4 & 5) Packaging SOT-323 SOT-323 Device DDTA1xxEUA-7-F DDTA1xxEUA-13-F Notes: Shipping 3000/Tape & Reel 10,000/Tape & Reel 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information Date Code Key Year 2006 2007 2008 2009 2010 2011 2012 T U V W X Y Z Code Month Code XXX = Product Type Marking Code, See Table on Page 1 YM = Date Code Marking Y = Year ex: T = 2006 M = Month ex: 9 = September YM XXX Jan 1 Feb 2 Mar 3 Apr 4 May 5 Jun 6 Jul 7 Aug 8 Sep 9 Oct O Nov N Dec D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30325 Rev. 8 - 2 4 of 4 www.diodes.com DDTA (R1 = R2 SERIES) UA (c) Diodes Incorporated