DDTA114EUA-7-F - Diodes, Inc. - Datasheet.Directory

DDTA (R1 = R2 SERIES) UA

PNP PRE-BIASED SMALL SIGNAL SURF ACE MOUNT TRANSIS TOR

Features

DS30325 Rev. 8 - 2

1 of 4

www.diodes.com

DDTA (R1 = R2 SERIES) UA

• Epitaxial Planar Die Construction

• Complementary NPN Types Available (DDTC)

• Built-In Biasing Resistors, R1 = R2

• Lead Free/RoHS Compliant (Note 2)

• "Green" Device, Note 3 and 4

Mechanical Data

• Case: SOT-323

• Case Material: Molded Plastic, "Green" Molding

Compound, Note 4. UL Flammability Classification

Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020C

• Terminal Connections: See Diagram

• Terminals: Solderable per MIL-STD-202, Method 208

• Lead Free Plating (Matte Tin Finish annealed over

Alloy 42 leadframe).

• Marking Information: See Page 4

• Type Code: See Table Below

• Ordering Information: See Page 4

• Weight: 0.006 grams (approximate)

P/N R1, R2 (NOM) Type Code

DDTA123EUA

DDTA143EUA

DDTA114EUA

DDTA124EUA

DDTA144EUA

DDTA115EUA

2.2KΩ

4.7KΩ

10KΩ

22KΩ

47KΩ

100KΩ

P04

P08

P13

P17

P20

P24

SOT-323

Dim Min Max

A 0.25 0.40

B 1.15 1.35

C 2.00 2.20

D 0.65 Nominal

E 0.30 0.40

G 1.20 1.40

H 1.80 2.20

J 0.0 0.10

K 0.90 1.00

L 0.25 0.40

M 0.10 0.18

α 0° 8°

All Dimensions in mm

Maximum Ratings @TA = 25°C unless otherwise specified

Characteristic Symbol Value Unit

Supply Voltage, (3) to (2) VCC -50 V

Input Voltage, (1) to (2) DDTA123EUA

DDTA143EUA

DDTA114EUA

DDTA124EUA

DDTA144EUA

DDTA115EUA

VIN

+10 to –12

+10 to –30

+10 to –40

Output Current DDTA123EUA

DDTA143EUA

DDTA114EUA

DDTA124EUA

DDTA144EUA

DDTA115EUA

-100

-50

-30

-20

Output Current All IC (Max) -100 mA

Power Dissipation Pd200 mW

Thermal Resistance, Junction to Ambient Air (Note 1) RθJA 625 °C/W

Operating and Storage Temperature Range Tj, TSTG -55 to +150 °C

Notes: 1. Mounted on FR4 PC Board with recommended pad layout as shown on Diodes Inc., suggested pad layout document AP02001, which can be found on

our website at http://www.diodes.com/datasheets/ap02001.pdf

2. No purposefully added lead.

3. Diodes Inc.'s "Green" Policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.

4. Product manufactured with date code 0627 (week 27, 2006) and newer are built with Green Molding Compound. Product manufactured prior to date

code 0627 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants.

OUT

IN GND(+)

1 3

GND (+)

IN OUT

Equivalent Inverter CircuitSchematic and Pin

Confi

uration

DS30325 Rev. 8 - 2

2 of 4

www.diodes.com

DDTA (R1 = R2 SERIES) UA

Electrical Characteristics @TA = 25°C unless otherwise specified

Characteristic Symbol Min Typ Max Unit Test Condition

Vl(off) -0.5 -1.1 ⎯ V VCC = 5V, IO = 100μA

Input Voltage Vl(on) ⎯ -1.9 -3 V

VO = 0.3V, IO = 20mA, DDTA123EUA

VO = 0.3V, IO = 20mA, DDTA143EUA

VO = 0.3V, IO = 10mA, DDTA114EUA

VO = 0.3V, IO = 5mA, DDTA124EUA

VO = 0.3V, IO = 2mA, DDTA144EUA

VO = 0.3V, IO = 1mA, DDTA115EUA

Output Voltage VO(on) ⎯ -0.1 -0.3 V

IO/Il =10mA/0.5mA, DDTA123EUA

IO/Il =10mA/0.5mA, DDTA143EUA

IO/Il =10mA/0.5mA, DDTA114EUA

IO/Il =10mA/0.5mA, DDTA124EUA

IO/Il =10mA/0.5mA, DDTA144EUA

IO/Il =5mA/0.25mA, DDTA115EUA

Input Current

DDTA123EUA

DDTA143EUA

DDTA114EUA

DDTA124EUA

DDTA144EUA

DDTA115EUA

Il⎯ ⎯

-3.8

-1.8

-.88

-.36

-.18

-.15

mA VI = -5V

Output Current IO(off) ⎯ ⎯ 0.5 μA VCC = -50V, VI = 0V

DC Current Gain

DDTA123EUA

DDTA143EUA

DDTA114EUA

DDTA124EUA

DDTA144EUA

DDTA115EUA

-20

-30

-56

-68

-82

⎯ ⎯ ⎯

VO = -5V, IO = -20mA

VO = -5V, IO = -10mA

VO = -5V, IO = -5mA

Input Resistor (R1) Tolerance ΔR1-30 ⎯ +30 % ⎯

Resistance Ratio R2/R10.8 1 1.2 ⎯ ⎯

Gain-Bandwidth Product* fT⎯ 250 ⎯ MHz VCE = -10V, IE = 5mA,

f = 100MHz

* Transistor - F o r Refere nce Only

Typical Curves –DDTA143EUA

-50 050

100 150

250

200

150

100

T , AMBIENT TEMPERA TURE ( C)

Fig. 1 Derating Curve

DISSI

ATI

(mW)

0.001

0.01

0.1

010 20 30 40 50

LLE

E (V)

CE(SAT)

I , COLLECTOR CURRENT (mA)

Fig. 2 V vs. I

CE(SAT) C

I/I = 10

-25 C

75 C

25 C

1,000

100

1110

h, D

100

I , COLLECTOR CURRENT (mA)

Fig. 3 DC Current Gain

020 30

E (p

)

V , REVERSE BIAS VOL TAGE (V)

Fig. 4 Output Capacitance

515 25

f = 1MHz

0.01

0.1

100

01234 89

LLE

(mA)

V , INPUT VOLT AGE (V)

Fig. 5 Collector Current vs. Input V o ltage

75 C

-25°C

567

25°C

V = 5V

0 10203040

I , COLLECTOR CURRENT (mA)

Fig. 6 Input Voltage vs. Collector Current

V = 0.2V

V , INPUT VOLT AGE (V)

DS30325 Rev. 8 - 2

3 of 4

www.diodes.com

DDTA (R1 = R2 SERIES) UA

Ordering Information (Note 4 & 5)

Device Packaging Shipping

DDTA1xxEUA-7-F SOT-323 3000/Tape & Reel

DDTA1xxEUA-13-F SOT-323 10,000/Tape & Reel

Notes: 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.

Marking Information

XXX

XXX = Product Type Marking Code, See Table on Page 1

YM = Date Code Marking

Y = Year ex: T = 2006

M = Month ex: 9 = September

Date Code Key

Year 2006 2007 2008 2009 2010 2011 2012

Code T U V W X Y Z

Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

Code 1 2 3 4 5 6 7 8 9 O N D

IMPORTANT NOTICE

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes

without further notice to any product herein. Diodes Incorporated does not assume an y liability arising out of the application or use of any product

described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall

assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website,

harmless against all damages. LIFE SUPPORT

Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written

approval of the President of Diodes Incorporated.

DS30325 Rev. 8 - 2

4 of 4

www.diodes.com

DDTA (R1 = R2 SERIES) UA