Compact, Low Cost High Voltage Converter 1.5Kv to 25Kv (Positive or Negative) @ 1.5 Watts DX Series The DX series is a line of compact power supplies providing up to 25,000 VDC for air cleaners, igniters, dielectric testers, electrostatic field generators and other applications requiring a compact source of clean, reliable, low cost high voltage. This unit exhibits low noise and EMI/RFI by utilizi ng a qua si- sinewave DX100 DX100N DX120 DX120N DX150 OPTIONS 24V Input Input/Output Connectors Input/Output Isolation Voltage Monitor DX150N APPLICATIONS Air cleaners Igniters Dielectric Testers Ionizers Electrostatic Generators CRT Anodes Image Intensifiers Capacitor Charging DX250N DX200 DX200N DX250 OUTPUT CURRENT 1.5kV to 10kV 100 uA WIRE COLOR -1.5kV to -10kV 100 uA Red 22 (+) Input 1.8kV to 12kV 100 uA Black 22 Ground (InputOutput) -1.8kV to -12kV 100 uA Orange 22 Voltage Control 30KV Silicone 22 HV Output 2.5kV to 15kV 100 uA -2.5kV to -15kV 100 uA 3kV to 20kV 75 uA -3kV to -20kV 75 uA 4kV to 25kV 75 uA -4kV to -25kV 75 uA FUNCTION TIP: LEAVE ORANGE WIRE DISCONNECTED AND VARY THE INPUT VOLTAGE FOR PROPORTIONAL OPERATION. Dimensions are in Inches Dimensional Tolerances: .03 (.76 mm) (Metric Equivalents in Parentheses) 1.00 (25.4) 3.75 (95.3) www.emcohighvoltage.com 1.50 (38.1) AWG EM C O High Voltage Corporation MODEL MFG CO DE DANGER FEATURES Resistance Controllable Low EMI/RFI Sinewave Oscillator Small Size Short Circuit Protection Low Cost/High Performance OUTPUT VOLTAGE HIGH VOLTAGE MODEL oscillator and a fully enclosed ferrite pot core transformer. The output voltage is controlled by an external potentiometer or resistor. Both positive and negative outputs are available. The high voltage connection is made through a 30kV silicone wire. Call, fax, or email your requirements for immediate attention. PHYSICAL CHARACTERISTICS SIZE: 3.75 x 1.5 x 1 (95.3 x 38.1 x 25.4 ) WEIGHT: 7 Ounces (198 grams) PACKAGING: Fully Encapsulated CASE MATERIAL: Glass-filled Epoxy HV OUTPUT LEAD: #22 AWG, 30KV, Silicone OUTPUT LEAD: #22 AWG, 30KV, SILICONE INPUT LEADS 12.00 (304.8) MIN TYPICAL ELECTRICAL SPECIFICATIONS INPUT VOLTAGE: 12 Volts (-5%, +10%) INPUT CURRENT, FULL LOAD: <400 mA OUTPUT VOLTAGE: See Table OUTPUT CURRENT: See Table RIPPLE: 2% VOLTAGE CONTROL: Connect 5K Potentiometer with wiper arm to orange wire. Connect remaining potentiometer lead to black wire. OPERATING TEMP: -10 to +50 C e-mail sales@emcohighvoltage.com Web site www.emcohighvoltage.com OUTPUT LEAD REF RED ORANGE Max V out 5K Min V out EXTERNAL CONTROL .22 .10 (5.6) TYPICAL .22 .10 (5.6) TYPICAL BLACK Phone (209) 223-3626 Fax (209) 223-2779 11126 Ridge Road, Sutter Creek CA 95685 We reserve the right to make changes without notification 4717M