3.2 mm x 2.5 mm XO C106A series Description: Features: The C106A Crystal Oscillator (XO) Series products provide a wide range of options in temperature stability, operating frequency range, and multiple supply voltages in a 3.2 x 2.5 mm ceramic package. * Available in frequencies from 1.0 MHz to 200MHz. * * Tri-state Enable/Disable Hermetically sealed ceramic SMD package TTL/HCMOS compatible * * RoHS-6/Leadfree compliant Frequency Range, Operating Temperature, and Frequency Stability: Product Code Product Code Operating Temperature Freq. Stability A A -10 to +60C +/- 25 ppm B B 1.000 to 200MHz 0 to +70C +/- 50 ppm C C -20 to 70C +/- 75 ppm D D -40 to 85C +/-100ppm * ***Frequency stability includes 25C tolerance, drift over temperature, change versus voltage and load, 20 year aging, shock and vibration * Frequency Aging: (typical at 20MHz after 30 days continuous operation) Frequency 20 MHz Timeframe 1st Year Aging +/- 5.0ppm Product Code N/A Supply Voltage (Vs): Power Supply (Vs) Product Code 1.8 Vdc +/-10% A 2.5 Vdc +/-10% B 3.3 Vdc +/-10% C Supply Voltage Sensitivity ( +/- 10% ) : +/- 2 ppm max. frequency change Current Consumption ( IDD ): Frequency Range ( MHz ) 1.000 to 9.999 10.000 to 34.999 35.000 to 49.999 50.000 to 79.999 80.000 to 133.000 133.000 to 166.000 166.000 to 200.000 IDD ( at 1.8 V ) mA 6 8 15 25 25 N/A N/A IDD ( at 2.5V ) IDD ( at 3.3V ) mA 8 10 20 30 30 30 N/A mA 10 15 25 35 35 35 35 **N/A means that frequency range not available for particular supply voltage. Environmental: Storage Temperature www.bliley.com -55 to +125 C 2545 West Grandview Blvd Erie, PA. 16506 Page 1 of 4 Tel (814) 838-3571 Rev 1.2 A 3.2 mm x 2.5 mm XO C106A series Output Waveform: Output Symmetry Rise Time ( nS ) Fall Time ( nS ) Output Voltage Output Voltage HCMOS load ( pF ) At 50% VDD Tr Tf VOH VOL Min 45% 3 3 90% VDD 14.85 Typical 50% 5 5 Max 55% 10 10 15.00 10% VDD 15.15 Start-up Time: 5 mS max. Tri-state function Pin 1: Pin 1 = logic high ( 0.7*Vsupply ) or open ; Output active at Pin 3 Pin 1 = logic low ( 0.3*Vsupply ) ; high impedance at pin 3 Output disabled Ordering Options: Product Family Operating Temperature C106A A C106A B C106A C C106A D Frequency Stability A B C D Supply Voltage A B C Operating Frequency XXX.XXXX MHz XXX.XXXX MHz XXX.XXXX MHz XXX.XXXX MHz C106A C A B 10.0000MHz Part Number Build Example **Consult Bliley sales if other options required ** Not all combinations of operating frequency and supply voltage are available. RoHs compliant; -20 to 70C; +/- 25 ppm with a 2.5 volt supply And 10 MHz nominal operating frequency. How to Order This Product: Contact Bliley Technologies with Product Selection Code from Ordering Options Section above. www.bliley.com 2545 West Grandview Blvd Erie, PA. 16506 Page 2 of 4 Tel (814) 838-3571 Rev 1.2 A