DATA SHEET PHOTOCOUPLER PS2705-1,PS2705-2,PS2705-4 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE SOP MULTI PHOTOCOUPLER -NEPOC TM Series- DESCRIPTION The PS2705-1, PS2705-2, PS2705-4 are optically coupled isolators containing two GaAs light emitting diodes and an NPN silicon phototransistor. These packages are SOP (Small Outline Package) type and have shield effect to cut off ambient light. They are designed for high density mounting applications. FEATURES * AC input response * High isolation voltage (BV = 3 750 Vr.m.s.) * High current transfer ratio (CTR = 100 % TYP.) * SOP (Small Outline Package) type * High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) * Ordering number of taping product (Only-1 type) : PS2705-1-E3, E4, F3, F4 * UL approved: File No. E72422 (S) * VDE0884 approved (Option) APPLICATIONS * Hybrid IC * Telephone/FAX * FA/OA equipment * Programmable logic controllers * Power supply ORDERING INFORMATION Part Number Package Safety Standard Approval PS2705-1 4-pin SOP Standard products PS2705-2 8-pin SOP * UL approved PS2705-4 16-pin SOP PS2705-1-V 4-pin SOP PS2705-2-V 8-pin SOP PS2705-4-V 16-pin SOP VDE0884 approved products (Option) The information in this document is subject to change without notice. Document No. P11309EJ5V0DS00 (5th edition) Date Published December 1998 NS CP (K) Printed in Japan The mark * shows major revised points. (c) 1988 PS2705-1,PS2705-2,PS2705-4 PACKAGE DIMENSIONS (in millimeters) PS2705-1 4.5 MAX. TOP VIEW 4 1 3 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector 2 1.3 0.15 +0.10 -0.05 2.0 0.10.1 2.3 MAX. 7.00.3 4.4 2.54 0.4 +0.10 -0.05 1.2 MAX. 0.50.3 0.25 M PS2705-2 9.3 MAX. TOP VIEW 8 7 6 5 1. 3. 2. 4. 5. 7. 6. 8. 1 2 3 4 7.00.3 4.4 1.3 0.15 +0.10 -0.05 2.0 0.10.1 2.3 MAX. Anode, Cathode Cathode, Anode Emitter Collector 2.54 0.4 +0.10 -0.05 1.2 MAX. 0.50.3 0.25 M PS2705-4 19.46 MAX. TOP VIEW 16 15 1 2 14 13 12 3 4 5 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. 0.15 +0.10 -0.05 2.0 0.10.1 2.3 MAX. 2 0.25 M 2.54 1.2 MAX. Data Sheet P11309EJ5V0DS00 0.50.3 10 9 6 7 8 Anode, Cathode Cathode, Anode Emitter Collector 7.00.3 4.4 0.4 +0.10 -0.05 11 1.3 PS2705-1,PS2705-2,PS2705-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Ratings Parameter Diode Symbol PS2705-2, PS2705-4 Unit IF 50 mA PD/C 0.8 mW/C PD 80 mW/ch IFP 1 A Collector to Emitter Voltage VCEO 40 V Emitter to Collector Voltage VECO 6 V IC 80 mA/ch Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current Transistor PS2705-1 *1 Collector Current Power Dissipation Derating Power Dissipation *2 PC/C 1.5 1.2 mW/C PC 150 120 mW/ch Isolation Voltage BV 3 750 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C *1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output Data Sheet P11309EJ5V0DS00 3 PS2705-1,PS2705-2,PS2705-4 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Symbol Conditions MIN. MAX. Unit 1.4 V Forward Voltage VF IF = 5 mA 1.1 Terminal Capacitance Ct V = 0 V, f = 1 MHz 60 Transistor Collector to Emitter Current ICEO IF = 0 mA, VCE = 40 V Coupled Current Transfer Ratio *1 (IC/IF) CTR IF = 5 mA, VCE = 5 V 50 CTR Ratio CTR1/ CTR2 IF = 5 mA, VCE = 5 V 0.3 Collector Saturation Voltage VCE (sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz Rise Time Fall Time *2 tr *2 VCC = 5 V, IC = 2 mA, RL = 100 tf M: 50 to 150 (%) L: 100 to 300 (%) N: 50 to 300 (%) *2 CTR1 = IC1/IF1, CTR2 = IC2/IF2 IC1 IF1 VCE IC2 IF2 *3 Test circuit for switching time Pulse Input IF VCC PW = 100 s Duty Cycle = 1/10 In monitor 50 VOUT RL = 100 Data Sheet P11309EJ5V0DS00 pF 100 nA 100 300 % 1.0 3.0 0.3 V 11 10 0.4 pF 3 s 5 *1 CTR rank (only PS2705-1) 4 TYP. PS2705-1,PS2705-2,PS2705-4 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 100 75 50 25 25 0 50 75 100 200 150 PS2705-1 1.5 mW/C 100 PS2705-2, PS2705-4 1.2 mW/C 50 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE FORWARD CURRENT vs. FORWARD VOLTAGE 100 80 10 1 Forward Current IF (mA) Forward Current IF (mA) 60 TA = +100 C +75 C +50 C +25 C 0 C -25 C -55 C 0.1 40 20 0 -20 -40 -60 0.8 1.0 1.2 1.4 -80 -1.6 -1.2 -0.8 -0.4 1.6 0 0.4 0.8 1.2 1.6 Forward Voltage VF (V) Forward Voltage VF (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 50 10 000 IF = 25 mA 20 1 000 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 0.01 0.6 VCE = 40 V 24 V 10 V 100 10 1 10 mA 10 5 mA 5 2 2 mA 1 1 mA 0.5 0.2 0.1 -60 -40 -20 0 20 40 60 80 100 0.1 0.0 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE (sat) (V) Ambient Temperature TA (C) Data Sheet P11309EJ5V0DS00 5 PS2705-1,PS2705-2,PS2705-4 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 40 IF = 30 mA 20 mA 30 15 mA 20 10 mA 10 5 mA 2 0 4 6 8 10 ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 C, IF = 5 mA, VCE = 5 V 0.2 0.0 -50 -25 50 75 CURRENT TRANSFER RATIO vs. FORWARD CURRENT SWITCHING TIME vs. LOAD RESISTANCE 100 VCE = 5 V Switching Time t ( s) 250 200 150 100 100 VCC = 5 V, IC = 2 mA 50 ton toff 10 5 td ts 1 0.5 50 0.5 1 5 0.1 50 50 10 100 Forward Current IF (mA) 1 000 IF = 5 mA, VCC = 5 V, 500 CTR = 169 % 500 1k 2k FREQUENCY RESPONSE 1.2 tf 1.0 10 5 tr td 1 0.5 Normalized Gain GV ts 100 50 0.1 100 200 Load Resistance RL () SWITCHING TIME vs. LOAD RESISTANCE Switching Time t ( s) 25 Ambient Temperature TA (C) 0 0.05 0.1 0.8 0.6 RL = 1 k 510 300 100 0.4 0.2 500 1 k 5 k 10 k 50 k 100 k 0.0 2 5 10 20 50 100 200 Frequency f (kHz) Load Resistance RL () 6 0 Collector to Emitter Voltage VCE (V) 300 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR Collector Current IC (mA) 50 Data Sheet P11309EJ5V0DS00 500 PS2705-1,PS2705-2,PS2705-4 LONG TERM CTR DEGRADATION 1.2 CTR (Relative Value) 1.0 0.8 IF = 1 mA, TA = 25 C IF = 5 mA, TA = 25 C IF = 20 mA, TA = 25 C IF = 20 mA, TA = 60 C 0.6 0.4 0.2 0.0 1 102 103 104 105 106 Time (Hr) Remark The graphs indicate nominal characteristics. Data Sheet P11309EJ5V0DS00 7 PS2705-1,PS2705-2,PS2705-4 TAPING SPECIFICATIONS (in millimeters) 1.550.1 2.40.1 7.40.1 5.50.1 1.550.1 12.00.2 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 0.3 4.60.1 8.00.1 Taping Direction PS2705-1-E4 PS2705-1-F4 PS2705-1-E3 PS2705-1-F3 Outline and Dimensions (Reel) 6 6.01 Packing: PS2705-1-E3, E4 900 pcs/reel PS2705-1-F3, F4 3 500 pcs/reel 8 Data Sheet P11309EJ5V0DS00 13.00.5 1.50.5 66 2.00.5 0 1.50.1 120 PS2705-1-E3, E4: 178 PS2705-1-F3, F4: 330 21.00.8 1.50.1 12.4 +2.0 -0.0 18.4 MAX. PS2705-1,PS2705-2,PS2705-4 RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature 235 C (package surface temperature) * Time of temperature higher than 210 C 30 seconds or less * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 C (peak temperature) 210 C to 30 s 120 to 160 C 60 to 90 s (preheating) Time (s) Peak temperature 235 C or below (2) Dip soldering * Temperature 260 C or below (molten solder temperature) * Time 10 seconds or less * Number of times One * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Data Sheet P11309EJ5V0DS00 9 PS2705-1,PS2705-2,PS2705-4 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884) Parameter Symbol Speck Unit Application classification (DIN VDE 0109) for rated line voltages 300 Vr.m.s. IV for rated line voltages 600 Vr.m.s. III Climatic test class (DIN IEC 68 Teil 1/09.80) 55/100/21 Dielectric strength Maximum operating isolation voltage UIORM 710 Vpeak Upr 850 Vpeak Test voltage (partial discharge test, procedure b for random test) Upr = 1.6 x UIORM, Pd < 5 pC Upr 1 140 Vpeak Highest permissible overvoltage UTR 6 000 Vpeak Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.2 x UIORM, Pd < 5 pC Degree of pollution (DIN VDE 0109) 2 Clearance distance >5 mm Creepage distance >5 mm Comparative tracking index (DIN IEC 112/VDE 0303 part 1) CTI Material group (DIN VDE 0109) 175 III a Storage temperature range Tstg -55 to +150 C Operating temperature range TA -55 to +100 C Ris MIN. 10 Isolation resistance, minimum value VIO = 500 V dc at TA = 25 C VIO = 500 V dc at TA MAX. at least 100 C 12 11 Ris MIN. 10 Package temperature Tsi 150 C Current (input current IF, Psi = 0) Isi 200 mA Power (output or total power dissipation) Psi 300 mW Ris MIN. 10 Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Isolation resistance VIO = 500 V dc at TA = 175 C (Tsi) 10 Data Sheet P11309EJ5V0DS00 9 PS2705-1,PS2705-2,PS2705-4 [MEMO] Data Sheet P11309EJ5V0DS00 11 PS2705-1,PS2705-2,PS2705-4 CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEPOC is a trademark of NEC Corporation. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product. M4 96. 5