http://www.fujielectric.com/products/semiconductor/ 6MBP30VAA060-50 IGBT Modules IGBT MODULE (V series) 600V / 30A / IPM Features * Temperature protection provided by directly detecting the junction temperature of the IGBTs * Low power loss and soft switching * Compatible with existing IPM-N series packages * High performance and high reliability IGBT with overheating protection * Higher reliability because of a big decrease in number of parts in built-in control circuit Maximum Ratings and Characteristics Absolute Maximum Ratings (TC =25C, VCC =15V unless otherwise specified) Items Symbol Min. Max. Units Collector-Emitter Voltage (*1) Short Circuit Voltage VCES VSC IC Ic pulse -IC PC VCC Vin VALM IALM Tj Topr Tstg Tsol Viso - 0 200 -0.5 -0.5 -0.5 -20 -40 - 600 400 30 60 30 137 20 VCC+0.5 VCC 20 150 110 125 260 AC2500 1.7 V V A A A W V V V mA C C C C Vrms Nm Collector Current DC 1ms Duty=100% (*2) 1 device (*3) Collector Power Dissipation Supply Voltage of Pre-Driver (*4) Input Signal Voltage (*5) Alarm Signal Voltage (*6) Alarm Signal Current (*7) Junction Temperature Operating Case Temperature Storage Temperature Solder Temperature (*8) Isolating Voltage (*9) Screw Torque Mounting (M4) Note *1: VCES shall be applied to the input voltage between terminal P-(U,V, W) and (U,V, W)-N. Note *2: Duty=125C/Rth(j-c)D /(I FxVF Max.)x100 Note *3: PC=125C/Rth(j-c)Q Note *4: VCC shall be applied to the input voltage between terminal No.3 and 1, 6 and 4, 9 and 7, 11 and 10. Note *5: Vin shall be applied to the input voltage between terminal No.2 and 1, 5 and 4, 8 and 7, 12~14 and 10. Note *6: VALM shall be applied to the voltage between terminal No.15 and 10. Note *7: I ALM shall be applied to the input current to terminal No.15. Note *8: Immersion time 101sec. 1time. Note *9: Terminal to base, 50/60Hz sine wave 1minute. 1 1404a JUNE 2015 6MBP30VAA060-50 IGBT Modules http://www.fujielectric.com/products/semiconductor/ Electrical Characteristics (Tj =25C, VCC =15V unless otherwise specified) Items Inverter Collector Current at off signal input Symbol Conditions ICES VCE=600V Terminal Chip Terminal Chip Collector-Emitter saturation voltage VCE(sat) IC =30A Forward voltage of FWD VF IF=30A ton toff VDC =300V, Tj =125C IC =30A trr VDC =300V IF=30A Switching time Supply current of P-side pre-driver (per one unit) Supply current of N-side pre-driver Iccp Iccn Vinth(on) Input signal threshold voltage Vinth(off) Over Current Protection Level IOC Over Current Protection Delay time tdOC Short Circuit Protection Delay time tSC IGBT Chips Over Heating Protection Temperature Level TjOH Over Heating Protection Hysteresis TjH Under Voltage Protection Level VUV Under Voltage Protection Hysteresis VH tALM(OC) tALM(UV) Alarm Signal Hold Time tALM(TjOH) Resistance for current limit RALM Switching Frequency= 0-15kHz TC =-20~110C Vin -GND ON OFF Tj =125C Tj =125C Tj =125C Surface of IGBT Chips ALM-GND TC =-20~110C VCC 10V Min. Typ. Max. Units 1.1 - 1.4 1.8 - 1.0 1.9 2.3 2.1 mA V V V V s s - - 0.3 s 1.2 1.5 45 150 11.0 0.2 1.0 2.5 5.0 960 1.4 1.7 5 2 20 0.5 2.0 4.0 8.0 1265 9 23 1.6 1.9 3 12.5 2.4 4.9 11.0 1570 mA mA V V A s s C C V V ms ms ms Thermal Characteristics (TC = 25C) Items Junction to Case Thermal Resistance (*10) Inverter Symbol Rth(j-c)Q Rth(j-c)D Rth(c-f) IGBT FWD Case to Fin Thermal Resistance with Compound Min. - Typ. 0.05 Max. 0.91 1.50 - Units C/W C/W C/W Note *10: For 1device, the measurement point of the case is just under the chip. Noise Immunity (VDC =300V, VCC =15V) Items Conditions Min. Typ. Max. Units Common mode rectangular noise Pulse width 1s, polarity , 10 minute Judge : no over-current, no miss operating 2.0 - - kV Recommended Operating Conditions Items DC Bus Voltage Power Supply Voltage of Pre-Driver Switching frequency of IPM Arm shoot through blocking time for IPM's input signal Screw Torque (M4) Symbol VDC VCC fSW tdead - Min. 13.5 1.0 1.3 Typ. 15.0 - Max. 400 16.5 20 1.7 Units V V kHz s Nm Symbol Wt Min. - Typ. 80 Max. - Units g Weight Items Weight 2 6MBP30VAA060-50 IGBT Modules http://www.fujielectric.com/products/semiconductor/ Block Diagram P VccU VinU Pre-Driver U GNDU VccV VinV Pre-Driver V GNDV VccW VinW Pre-Driver W GNDW Vcc VinX VinY Pre-Driver VinZ ALM N RALM Pre-drivers include following functions 1. Amplifier for driver 2. Short circuit protection 3. Under voltage lockout circuit 4. Over current protection 5. IGBT chip over heating protection 3 6MBP30VAA060-50 IGBT Modules http://www.fujielectric.com/products/semiconductor/ Characteristics (Representative) Power supply current vs. Switching frequency Tj=25C (typ.) Input signal threshold voltage vs. Power supply boltage (typ.) 40 3 N-side P-side TC=25~125C 2.5 Input signal threshold voltage : Vinth (on), Vinth (off) [V] Power supply current : ICC [mA] 35 30 25 VCC=17V VCC=15V VCC=13V 20 15 VCC=17V VCC=15V VCC=13V 10 5 0 Vinth (off) 1.5 Vinth (on) 1 0.5 0 0 5 10 15 20 25 12 13 14 15 16 17 Switchig frequency : fSW [kHz] Power supply voltage : VCC [V] Under voltage vs. Junction temperature (typ.) Under voltage hysterisis vs. Junction temperature (typ.) 15 1 12 0.8 Under voltage hysterisis : VH [V] Under voltage : VUV [V] 2 9 6 3 0 18 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 0 20 40 60 80 100 Junction temperature : Tj [C] Junction temperature : Tj [C] Alarm hold time vs. Power supply voltage (typ.) Over heating characteristics TjoH, TjH vs. VCC (typ.) 10 200 120 140 17 18 TjoH Alarm hold time : TALM [msec] 8 Over heating protection : TjoH [C] OH hysterisis : TjH [C] tALM(TjOH) 6 4 tALM(OC) 2 150 100 50 TjH 0 0 12 13 14 15 16 17 12 18 Power supply voltage : VCC [V] 13 14 15 16 Power supply voltage : VCC [V] 4 6MBP30VAA060-50 IGBT Modules http://www.fujielectric.com/products/semiconductor/ Collector current vs. collector-Emitter voltage Tj=25C [Chip] (typ.) Collector current vs. collector-Emitter voltage Tj=25C [Terminal] (typ.) 60 60 50 VCC=15V VCC=17V 40 VCC=13V Collector current : IC [A] Collector current : IC [A] 50 30 20 10 0 0 0.5 1 1.5 VCC=13V 30 20 2 0 2.5 0 0.5 1 1.5 2 2.5 Collector-Emitter voltage : VCE [V] Collector-Emitter voltage : VCE [V] Collector current vs. collector-Emitter voltage Tj=125C [Chip] (typ.) Collector current vs. collector-Emitter voltage Tj=125C [Terminal] (typ.) 60 50 50 VCC=15V 40 VCC=17V Collector current : IC [A] Collector current : IC [A] VCC=17V 40 10 60 VCC=13V 30 20 VCC=15V 40 VCC=17V VCC=13V 30 20 10 10 0 0 0 0.5 1 1.5 2 2.5 0 0.5 1 1.5 2 2.5 Collector-Emitter voltage : VCE [V] Collector-Emitter voltage : VCE [V] Forward current vs. Forward voltage [Chip] (typ.) Forward current vs. Forward voltage [Terminal] (typ.) 60 60 50 50 40 Tj=125C Forward current : IF [A] Forward current : IF [A] VCC=15V Tj=25C 30 20 3 40 Tj=125C Tj=25C 30 20 10 10 0 0 0 0.5 1 1.5 2 2.5 0 Forward voltage : VF [V] 0.5 1 1.5 Forward voltage : VF [V] 5 2 2.5 6MBP30VAA060-50 IGBT Modules http://www.fujielectric.com/products/semiconductor/ Switching Loss vs. Collector Current (typ.) VDC=300V, VCC=15V, Tj=25C Switching Loss vs. Collector Current (typ.) VDC=300V, VCC=15V, Tj=125C 4 Switching loss : Eon, Eoff, Err [mJ/cycle] Switching loss : Eon, Eoff, Err [mJ/cycle] 4 3 2 Eon 1 Eoff 3 Eon 2 Eoff 1 Err Err 0 0 10 20 30 40 50 0 60 0 10 20 Thermal resistance : Rth(j-c) [C/W] Collector current : IC [A] 40 RBSOA (Repetitive pulse) 0 200 400 600 0.01 0.1 1 Pulse width : PW [sec] Power derating for IGBT (max.) [per device] Power derating for FWD(max.) [per device] 150 Collector Power Dissipation : PC [W] Collector Power Dissipation : PC [W] IGBT 1 Collector-Emitter voltage : VCE [V] 150 100 50 0 FWD 0.1 0.001 800 200 0 50 60 10 60 0 50 Transient thermal resistance (max.) Reversed biased safe operating area VCC=15V, Tj 125C [Main Terminal] (min.) 20 40 Collector Current : IC [A] Collector Current : IC [A] 80 30 100 100 50 0 150 Case Temperature : TC [C] 0 50 100 Case Temperature : TC [C] 6 10 150 6MBP30VAA060-50 Switching time vs. Collector current (typ.) VDC=300V, VCC=15V, Tj=25C 10000 ton toff 1000 100 tf 10 0 10 20 30 40 50 Switching time vs. Collector current (typ.) VDC=300V, VCC=15V, Tj=125C 10000 Switching time : ton, toff, tr [nsec] Switching time : ton, toff, tr [nsec] IGBT Modules http://www.fujielectric.com/products/semiconductor/ ton 100 tf 10 60 toff 1000 0 10 Collector current : IC [A] Reverse recovery characteristics (typ.) trr, Irr vs. If 1000 30 40 50 60 Over current protection level : IOC [A] trr Tj=25C 100 Over current protection vs. Junction temperature (typ. ) VCC=15V 100 trr Tj=125C Reverse recovery current : Irr [A] Reverse recovery time : trr [nsec] 20 Collector current : IC [A] Irr Tj=125C 10 Irr Tj=25C 80 60 40 20 0 1 0 10 20 30 40 0 20 40 60 80 100 Junction temperature : Tj [C] Forward current : IF [A] Outline Drawings, mm Weight: 80g(typ.) 7 120 140 6MBP30VAA060-50 IGBT Modules http://www.fujielectric.com/products/semiconductor/ WARNING 1.This Catalog contains the product specifications, characteristics, data, materials, and structures as of June 2015. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sur to obtain the latest specifications. 2.All applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Co., Ltd. is (or shall be deemed) granted. Fuji Electric Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3.Although Fuji Electric Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design failsafe, flame retardant, and free of malfunction. 4.The products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. * Computers * OA equipment * Communications equipment (terminal devices) * Measurement equipment * Machine tools * Audiovisual equipment * Electrical home appliances * Personal equipment * Industrial robots etc. 5.If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. * Transportation equipment (mounted on cars and ships) * Trunk communications equipment * Traffic-signal control equipment * Gas leakage detectors with an auto-shut-off feature * Emergency equipment for responding to disasters and anti-burglary devices * Safety devices * Medical equipment 6.Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). * Space equipment * Aeronautic equipment * Nuclear control equipment * Submarine repeater equipment 7.Copyright (c)1996-2015 by Fuji Electric Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Co., Ltd. 8.If you have any question about any portion in this Catalog, ask Fuji Electric Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein. 8 Technical Information IGBT Modules Please refer to URLs below for futher information about products, application manuals and technical documents. , , URL FUJI ELECTRIC Power Semiconductor WEB site www.fujielectric.co.jp/products/semiconductor/ Global www.fujielectric.com/products/semiconductor/ www.fujielectric.com.cn/products/semiconductor/ Europe www.fujielectric-europe.com/components/semiconductors/ North America www.americas.fujielectric.com/components/semiconductors/ Information 1 2 3 4 5 6 IGBT 7 AT-NPC 3-Level 8 9 10 www.fujielectric.co.jp/products/semiconductor/catalog/ www.fujielectric.co.jp/products/semiconductor/model/ www.fujielectric.co.jp/products/semiconductor/model/igbt/application/ www.fujielectric.co.jp/products/semiconductor/model/igbt/technical/ www.fujielectric.co.jp/products/semiconductor/model/igbt/mounting/ www.fujielectric.co.jp/products/semiconductor/model/igbt/simulation/ www.fujielectric.co.jp/products/semiconductor/model/igbt/simulation_3level/ www.fujielectric.co.jp/products/semiconductor/journal/ www.fujielectric.co.jp/products/semiconductor/contact/ www.fujielectric.co.jp/products/semiconductor/discontinued/ Global 1 Semiconductors General Catalog 2 Product Information 3 Application Manuals 4 Technical Documents 5 Mounting Instructions 6 IGBT Loss Simulation Software 7 AT-NPC 3-Level Loss Simulation Software 8 Fuji Electric Journal 9 Contact 10 Revised and discontinued product information www.fujielectric.com/products/semiconductor/catalog/ www.fujielectric.com/products/semiconductor/model/ www.fujielectric.com/products/semiconductor/model/igbt/application/ www.fujielectric.com/products/semiconductor/model/igbt/technical/ www.fujielectric.com/products/semiconductor/model/igbt/mounting/ www.fujielectric.com/products/semiconductor/model/igbt/simulation/ www.fujielectric.com/products/semiconductor/model/igbt/simulation_3level/ www.fujielectric.com/products/semiconductor/journal/ www.fujielectric.com/products/semiconductor/contact/ www.fujielectric.com/products/semiconductor/discontinued/ 1 2 3 4 5 6 IGBT 7 AT-NPC 3-Level 8 9 10 www.fujielectric.com.cn/products/semiconductor/catalog/ www.fujielectric.com.cn/products/semiconductor/model/ www.fujielectric.com.cn/products/semiconductor/model/igbt/application/ www.fujielectric.com.cn/products/semiconductor/model/igbt/technical/ www.fujielectric.com.cn/products/semiconductor/model/igbt/mounting/ www.fujielectric.com.cn/products/semiconductor/model/igbt/simulation/ www.fujielectric.com.cn/products/semiconductor/model/igbt/simulation_3level/ www.fujielectric.com.cn/products/semiconductor/journal/ www.fujielectric.com.cn/products/semiconductor/contact/ www.fujielectric.com.cn/products/semiconductor/discontinued/ 2015-10