Table of Contents The 01005 to 1806 series ranger of Miniature Ferrite beads contains the very latest in multi layer ferrite beads technology, thus providing the ultimate in performance demanded by today's high Speed EMI noise filtering products. The ferrite beads are in an industry standard size and footprint. Ferrite beads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Parts number Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Competitor Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Reliability and Test Condition . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5 Derating Curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Product Specifications Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Lead Free Solder re-flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Solder Iron . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .6 Solder Volume . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Packaging Information . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .7 Reel Dimension . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Qty/reel . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . .7 Tearing Off Force . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . .7 Application Notes . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Ferrite Bead EMI Suppressor Single Type - 01005FB, 0201FE, 0402FB, 0603FB & 0805FB Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11 Single GHz Type - 00402HFB & 0603HFB Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13 Array Type - 1206FBA Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15 Power Type - 0603PFB, 0805PFB, 1206PFB, & 1806PFB Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17 WC706.H (03/19) Networking.PulseElectronics.com i CHIP FERRITE BEADS 1.0 Ferrite Beads It is known as absorptive beads, is more lossy and make good power filter networks because they are designed to absorb high-frequency noise currents and dissipate it as heat. These beads have high impedance over wide highfrequency bands, making them ideal as low-pass noise filters. Structure FREQUENCY (MHz) Z = Impedance (ohm) R = Real Part (resistance) X = imaginary Part (inductance) Application Vcc Ferrite Bead + Ferrite Bead ChipchokeTM Common Mode Noise suppression 2.0 Parts Number Legend PE-0201 FB 121 S T A PACKAGE STYLE CORE MATERIAL Impedance () TOLERANCE * PACKAGE Enhanced FB = Ferrite Bead 121=120 J = 5% T = Tape & Reel A = Alternative 01005, 0201, 0402, 0603, 0805, 1206 1806 HFB = High Frequency Ferrite Bead S = 25% PFB = High Current Ferrite Bead X = not apply AFB=Automotive Ferrite Bead FBA = Frequency Bead Array * There is no tolerance option for these products. 2 Networking.PulseElectronics.com WC706.H (03/19) CHIP FERRITE BEADS 3.0 Competitor Cross ITEM Pulse TAIYO YUDEN TDK MURATA Ferrite Bead Single FB Series BK & FBM Series MMZ Series BLMxxAG Series BLMxxBD Series BLMxxAX Series Ferrite Bead Array FBA Series BKxxxx4S Series MZA Series GHz Ferrite Beads Single HFB Series FBMH Series MMZ1005-E Series Power Ferrite Bead Single PFB Series BLA Series BLMxxH Series BLMxxPG Series 4.0 Reliability and Test Condition Item Performance Test Condition Series No. PE-01005FB/0201FB/0402FB/0603FB/0805FB/0402HFB/0603HFB/ 1206FBA Operating -40 ~+105C Temperature (Including self-temperature rise) Transportation -40 ~+125C Storage Temperature Impedance (Z) Refer to standard electrical characteristics list Agilent4291 Inductance (Ls) AgilentE4991 Q Factor Agilent4287 DC Resistance Agilent16192 Rated Current Agilent4338 DC Power Supply Over Rated Current requirements Temperature Rise Rated Current < 1A T 20C Max 1. Applied the allowed DC current Test Rated Current 1A T 20C Max 2. Temperature measured by digital surface thermometer Resistance to Appearance: No damage Preheat: 150C, 60sec Soldering Heat Impedance: Within 15% of initial value Solder: Sn99.5%-Cu0.5% Inductance: Within 10% of initial value Solder temperature: 2605C Q: Shall not exceed the specification value. Flux for lead free: Rosin.9.5% RDC: Shall not exceed the specification value. Temperature ramp/immersion and immersion rate: 256 mm/s Preheating Dipping Natural Cooling Depth: completely cover the termination. 260C 150C WC706.H (03/19) Dip time: 101sec. 60 second 101.0 second Networking.PulseElectronics.com 3 CHIP FERRITE BEADS 4.0 Reliability and Test Condition Item Performance Test Condition Solderability More than 95% of the terminal electrode should be covered with solder Preheat: 150C, 60sec Preheating Dipping Natural Cooling 245C 150C Terminal strength Solder: Sn99.5%-Cu0.5% Solder temperature: 2455C Flux for lead free: Rosin.9.5% 60 second 41.0 second Depth: completely cover the termination. Dip time: 41sec. Appearance: No damage. Preconditioning: Run through IR reflow for 2 times. (IPC/JEDEC Impedance: within15% of initial value J-STD-020D Classification Reflow Profiles) Inductance: within10% of initial value Q: Shall not exceed the specification value. Component mounted on a PCB apply a force (>0805:1kg<=080 RDC: Shall not exceed the specification value. 5:0.5kg) to the side of a device being tested. This force shall be applied for 60 +1 econds. Also the force shall be applied gradually as not to shock the component being tested. Bending Vibration Test Appearance: No damage. Shall be mounted on a FR4 substrate of the Impedance: within 10% of initial value Following dimensions: >=0805:40x100x1.2mm Inductance: within 10% of initial value <0805:40x100x0.8mm Q: Shall not exceed the specification value Bending depth: >=0805:1.2mm RDC: Shall not exceed the specification value Duration of 10 sec for a min. Appearance: No damage. Preconditioning: Run through IR reflow for 2 times. (IPC/JEDEC J-STD-020D Classification ~ ~ Reflow Profiles) Impedance: within 15% of initial value Oscillation Frequency: 10 2K 10Hz for 20 minutes Inductance: within 10% of initial value Equipment: Vibration checker Q: Shall not exceed the specification value Total Amplitude: 1.52mm 10% RDC: within 15% of initial value and shall not exceed the specification Testing Time: 12 hours (20 minutes 12 cycles each of 3 orientations). value Shock Appearance: No damage. 4 Impedance: within 15% of initial value Test condition: Type Peak Normal Inductance: within 10% of initial value Value duration Q: Shall not exceed the specification value (g's) RDC: within 15% of initial value and shall not exceed the SMD 1,500 specification value Lead 100 Networking.PulseElectronics.com WC706.H (03/19) Velocity change Wave (D) (ms) form (Vi)ft/sec 0.5 Half-sine 15.4 6 Half-sine 12.3 CHIP FERRITE BEADS Life Test Appearance: No damage. Preconditioning: Run through IR reflow for 2 times. (IPC/JEDEC Impedance: within 15% of initial value J-STD-020D Classification Reflow Profiles) Inductance: within 10% of initial value Temperature: 1252C(bead), Q: Shall not exceed the specification value 852C(inductor) RDC: within 15% of initial value and shall not exceed the Applied current: rated current specification value Duration: 100012hrs. Measured at room temperature after placing for 242 hrs. Load Humidity Preconditioning: Run through IR reflow for 2 times. (IPC/JEDEC J-STD-020D Classification Reflow Profiles) Humidity: 852%R.H. Temperature: 852C Duration: 1000hrs Min. with 100% rated current. Measured at room temperature after placing for 242 hrs. Thermal Shock Appearance: no damage Preconditioning: Run through IR reflow for 2 times. (IPC/JEDEC Impedance: within 15% of initial value J-STD-020D Classification Reflow Profiles) Inductance: within 10% of initial value Condition for 1 cycle Q: Shall not exceed the specification value Step1: -402C 305 min. RDC: Shall not exceed the specification value Step2: 252C300.5 min. Step3: +1052C 305 min. Number of cycles: 500 Measured at room temperature after placing for 242 hrs. Insulation IR>1G Chip Inductor Only Resistance Test Voltage: 10010%V for 30Sec 5. **Derating Curve For the ferrite chip bead which withstanding current over 1.5A, as operating temperature over 85C, the derating current information is necessary to consider. For the detail derating of current, please refer to the Derated Current vs. perating Temperature curve. Wave 6. Soldering Mildly activated rosin fluxes are preferred. The termination are suitable for re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. Note. If wave soldering is used, there will be some risk. Re-flow soldering temperatures below 240 degrees, there will be non-wetting risk. WC706.H (03/19) Networking.PulseElectronics.com 5 CHIP FERRITE BEADS 6.1 Lead Free Solder re-flow Recommended temperature profiles for lead free re-flow soldering in Figure 1. Reflow times: 3 times max Pre-heating Soldering Natural Cooling TP (260C / 10s max.) TEMPERATURE (C) tp (245C / 20~40s.) 217 60~150s 200 150 60~180s 480s max. TIME( sec.) Figure 1 6.2 Solder Iron Pre-heating Soldering Natural Cooling Within 4~5s TEMPERATURE (C) 350 150 Over 60s Gradual Cooling TIME( sec.) Figure 2 (1 time max) Products attachment with a soldering iron is discouraged due to the inherent process control limitations. If a soldering iron must be employed the following precautions are recommended. For Iron Soldering in Figure 2. * Preheat circuit and products to 150C * 350C tip temperature (max) * Never contact the ceramic with the iron flip * 1.00mm tip diameter (max) * Use a 20 watt soldering iron with tip diameter of 1.0mm * Limited soldering time to 4~5sec 6.3 Solder Volume Accordingly increasing the solder volume, the mechanical stress to product is also increased. Exceeding solder volume may cause the failure of mechanical or electrical performance. Solder shall be used not to be exceed as shown in the right side: Minimum fillet height = soldering thickness + 25% product height 6 Networking.PulseElectronics.com WC706.H (03/19) CHIP FERRITE BEADS 7. Packaging Information 7.1 Reel Dimension A 20.5 D C B 120 7"x8mm 7"x12mm Type A(mm) B(mm) C(mm) D(mm) 7"x8mm 10.01.5 50 or more 130.2 1782 7.2 Qty/reel Chip Size Chip/Reel Reel Diameter PE-01005FB 20000 178 x 8mm PE-0201FB 15000 178 x 8mm PE-0402HFB 10000 178 x 8mm PE-0402FB 10000 178 x 8mm PE-0603FB 4000 178 x 8mm PE-0603HFB 4000 178 x 8mm PE-0603PFB 4000 178 x 8mm PE-0805FB 4000 178 x 8mm PE-0805AFB 4000 178 x 8mm PE-0805PFB 4000 178 x 8mm PE-1206FHA 3000 178 x 8mm PE-1206PFB 3000 178 x 8mm PE-1806PFB 3000 178 x 8mm 7.3 Tearing Off Force The force for tearing off cover tape is 15 to 60 grams in the arrow direction under the following conditions. Room Temp. (C) Room Humidity (%) Room atm (hPa) Tearing Speed mm/min 5 35 45 85 860 1060 300 ~ WC706.H (03/19) ~ Networking.PulseElectronics.com ~ 7 CHIP FERRITE BEADS Application Notice *Storage Conditions To maintain the solder ability of terminal electrodes: 1. Products meet IPC/JEDEC J-STD-020D standard-MSL, level 1. 2. Temperature and humidity conditions: Less than 40C and 60% RH. 3. Recommended products should be used within 12 months from the time of delivery. 4. The packaging material should be kept where no chlorine or sulfur exists in the air. * Transportation 1. Products should be handled with care to avoid damage or contamination from perspiration and skin oils. 2. The use of tweezers or vacuum pick up is strongly recommended for individual components. 3. Bulk handling should ensure that abrasion and mechanical shock are minimized. 8 Networking.PulseElectronics.com WC706.H (03/19) FERRITE BEAD EMI SUPPRESSOR SINGLE TYPE - FB SERIES FOR GENERAL SIGNAL LINE Signal Line EMI Suppression Monolithic inorganic material contstruction Various impedance and frequency application Industry Standard package Electrical Specifications @ 25C Part Number Impedance () Tolerance Test Frequency (MHz) DC Resistance () max. Rated Current (mA) max. PE-01005FB100JT 10 5 100 0.1 540 PE-01005FB700ST 70 25% 100 0.37 280 PE-01005FB121ST 120 25% 100 0.53 240 PE-01005FB750STA 75 25% 100 0.45 260 PE-01005FB121STA 120 25% 100 0.6 220 PE-0201FB220ST 22 25% 100 0.065 1000 PE-0201FB330ST 33 25% 100 0.07 1000 PE-0402FB100XT 015 - 100 0.03 1000 PE-0402FB121ST 120 25% 100 0.2 550 PE-0402FB601ST 600 25% 100 0.55 300 PE-0402FB102ST 1000 25% 100 0.58 300 PE-0603FB121ST 120 25% 100 0.18 500 PE-0603FB221ST 220 25% 100 0.25 500 PE-0603FB601ST 600 25% 100 0.38 500 PE-0603FB102ST 1000 25% 100 0.5 400 PE-0805FB121ST 120 25% 100 0.15 800 PE-0805FB601ST 600 25% 100 0.3 500 PE-0805FB102ST 1000 25% 100 0.4 500 Mechanicals Application PE-01005FB/PE-XXXXFB B Z T X A W Y SUGGESTED LAND PATTERN Unit: mm WC706.H (03/19) Networking.PulseElectronics.com 9 FERRITE BEAD EMI SUPPRESSOR SINGLE TYPE - FB SERIES FOR GENERAL SIGNAL LINE Dimension: Imperial Size A B W T X Y Z 01005 0.40.02 0.10.04/0.03 0.20.02 0.20.02 0.5~0.7 0.15~0.2 0.2~0.25 0201 0.600.03 0.150.005 0.300.03 0.300.03 0.80 0.2~0.3 0.25~0.40 0402 1.00.15 0.250.1 0.50.15 0.50.15 1.4~1.6 0.5~0.6 0.4~0.6 0603 1.60.15 0.30.2 0.80.15 0.80.15 0805 2.0(+0.3, -0.1) 0.50.3 1.250.2 0.850.2 All units in mm Impedance Frequency Characteristics (Typical) PE-01005FB100J T 300 20 15 Z 10 5 R 10 120 Z 80 40 X 1 160 100 1000 0 10000 10 0 100 1000 10000 200 R 1000 0 10000 Z 1 10 0 100 1000 10000 X 8 4 Frequency (MHz) 10 0 X 1 10 100 1000 Z 120 R 1000 100 140 Impedance () Impedance () Impedance () Z 100 10 PE-0402FB121ST R 12 10 1 160 16 1 X R Frequency (MHz) Z 0 Z 20 PE-0402FB100ST PE-0201FB330ST 20 30 Frequency (MHz) 60 10000 40 10 X R Frequency (MHz) 80 1000 PE-0201FB220ST 300 100 X 100 50 Impedance () Z 100 40 10 PE-01005FB121ST 200 100 R 1 Frequency (MHz) 400 Impedance () Impedance () X R 1 PE-01005FB750ST 10 Z 100 Frequency (MHz) 300 1 200 X Frequency (MHz) 0 Impedance () Impedance () Impedance () 25 0 PE-01005FB121ST PE-01005FB700ST 200 30 1000 R 100 80 60 X 40 20 10000 0 1 10 Frequency (MHz) Networking.PulseElectronics.com 100 Frequency (MHz) WC706.H (03/19) 1000 10000 FERRITE BEAD EMI SUPPRESSOR SINGLE TYPE - FB SERIES FOR GENERAL SIGNAL LINE Impedance Frequency Characteristics (Typical) PE-0402FB601ST Z 1000 500 Impedance() R 400 300 200 800 400 100 200 0 0 1 10 100 1000 Frequency (MHz) R 600 X 10000 1 10 100 1000 R 200 0 10000 600 Z Impedance() 120 R 60 X 20 X 1 10 10 100 100 1000 R 600 400 0 10000 X 1 10 1000 200 10000 X 1 10 100 Z 800 R 600 400 200 1000 10000 0 X 1 Frequency (MHz) 100 10 Frequency (MHz) Page 10 WC706.H (03/19) 1000 PE-0805FB102ST 300 10000 100 Frequency (MHz) R 100 1000 10000 800 200 Z 400 Frequency (MHz) 1000 1200 500 0 100 Frequency (MHz) Z PE-0805FB601ST 700 40 10 Frequency (MHz) 140 80 1 1000 300 160 100 X PE-0603FB102ST 400 PE-0805FB121ST Impedance() 0 Z 100 10 60 10000 Impedance() X 1 80 1200 Frequency (MHz) 1 1000 500 Impedance() Impedance() R 100 0 100 Frequency (MHz) 600 150 0 100 PE-0603FB601ST Z 50 R 120 20 700 200 140 40 X PE-0603FB221ST 300 250 Z 160 Impedance() Impedance() 180 1200 Z 600 PE-0603FB121ST Impedance() 700 PE-0402FB102ST Networking.PulseElectronics.com 11 1000 10000 FERRITE BEAD EMI SUPPRESSOR SINGLE TYPE FOR HIGH FREQUENCY APPLICATION Signal Line EMI Suppression Monolithic inorganic material construction Various impedance and frequency application High Frequency Giga Hz Application Industry Standard package Electrical Specifications @ 25C Part Number Impedance () Tolerance Test Frequency (MHz) Impedance () 1GHz mini DC Resistance () max. Rated Current (mA) max. PE-0402HFB221ST 220 25% 100 250 0.25 700 PE-0402HFB601ST 600 25% 100 840 0.85 300 PE-0402HFB102ST 1000 25% 100 1200 1.25 250 PE-0402HFB102STA 1000 25% 100 900 1.1 250 PE-0402HFB152ST 1500 25% 100 - 1.50 200 PE-0402HFB182ST 1800 25% 100 - 2.0 200 PE-0603HFB601ST 600 25% 100 450 0.35 500 PE-0603HFB102ST 1000 25% 100 750 1.6 100 Mechanical PE-XXXXHFB PCB LAYOUT B T X A N W Y SUGGESTED LAND PATTERN Unit: mm Dimension: Imperial Size A B W T X Y Z 0402 1.00.15 0.250.1 0.50.15 0.50.15 1.251.55 0.450.55 0.450.55 0603 1.60.15 0.30.2 0.80.15 0.850.2 1.82.4 0.60.8 0.60.8 All units in mm 12 Networking.PulseElectronics.com WC706.H (03/19) FERRITE BEAD EMI SUPPRESSOR SINGLE TYPE FOR HIGH FREQUENCY APPLICATION Impedance Frequency Characteristics (Typical) PE-0402HFB221ST PE-0402HFB601ST 350 2000 200 R 150 100 X 50 1 10 100 2400 1600 1200 Z 800 400 1000 0 10000 1 10 10000 R 600 1 10 100 1000 Z 1000 X 1 10 100 1000 PE-0603HFB601ST PE-0603HFB102ST 10000 Z 2000 1000 0 X R 1 10 100 1800 1600 600 Impedance() Z 700 R 500 400 300 200 1400 100 Z 1200 R 1000 X 800 600 400 X 200 1 10 100 1000 10000 Frequency (MHz) WC706.H (03/19) 10000 3000 Frequency (MHz) Frequency (MHz) 800 0 R Frequency (MHz) 900 1000 4000 2000 10000 100 PE-0402HFB182ST 3000 0 10 5000 X 200 1 Frequency (MHz) Impedance() Z 1200 Impedance() Impedance() 1000 R PE-0402HFB152ST 400 Impedance() 100 0 4000 800 600 X R PE-0402HFB102STA 1000 Z 1200 Frequency (MHz) 1600 1400 1800 X Frequency (MHz) 0 Impedance() Z 250 Impedance() Impedance() 300 0 PE-0402HFB102ST 0 1 10 100 Frequency (MHz) 1000 10000 Networking.PulseElectronics.com 13 1000 10000 FERRITE BEAD EMI SUPPRESSOR FOUR IN ONE ARRAY TYPE FOR SIGNAL LINE APPLICATION Signal Line EMI Suppression Combines four single type designs to support high density applications Various impedance and frequency application Industry Standard package Electrical Specifications @ 25C Part Number Impedance () Tolerance Test Frequency (MHz) DC Resistance () max. Rated Current (mA) max. PE-1206FBA300ST 30 25% 100 0.20 500 PE-1206FBA600ST 60 25% 100 0.25 400 PE-1206FBA121ST 120 25% 100 0.30 350 PE-1206FBA301ST 300 25% 100 0.40 250 PE-1206FBA601ST 600 25% 100 0.50 200 PE-1206FBA102ST 1000 25% 100 0.75 150 Mechanical Application PE-1206FBA SUGGESTED LAND PATTERN Unit: mm Schematic 14 Networking.PulseElectronics.com WC706.H (03/19) FERRITE BEAD EMI SUPPRESSOR FOUR IN ONE ARRAY TYPE FOR SIGNAL LINE APPLICATION Impedance Frequency Characteristics (Typical) PE-1206FBA300STA Impedance () () Impedance 40 50 Z 30 40 Z 20 30 X 10 20 0 10 0 X 1 100 10 Z X 2 0 100 100 0 0 X R 1 1 10 100 Frequency (MHz) 10 R 100 Z Z X X 200 400 R 1 10 100 Frequency (MHz) 1 10 1000 R 100 1000 PE-1206FBA102ST 1600 Z 800 600 X Z 1200 800 X 400 200 R 10 1000 Frequency (MHz) Impedance () Impedance () 10 400 600 0 1000 1000 1 1000 600 800 PE-1206FBA601ST 0 100 Frequency R(MHz) PE-1206FBA301STA Frequency (MHz) 400 10 800 1000 0 200 1000 100 1 1000 Z 300 2 0 R 1 PE-1206FBA301STA Frequency (MHz) PE-1206FBA121STA 400 300 X 40 1000 PE-1206FBA121STA Frequency (MHz) X 40 0 100 Z 80 1000 R (MHz) Frequency Z 80 0 10 PE-1206FBA600STA 120 R 1 400 Impedance Impedance () () 120 PE-1206FBA300STA Impedance Impedance () () Impedance Impedance () () 50 PE-1206FBA600STA 100 Frequency (MHz) WC706.H (03/19) 1000 0 R 1 10 100 Frequency (MHz) Networking.PulseElectronics.com 15 1000 FERRITE BEAD EMI SUPPRESSOR SINGLE TYPE FOR POWER LINE APPLICATION Power Line EMI Suppression Monolithic inorganic material construction Various impedance and frequency application Industry Standard package Electrical Specifications @ 25C Part Number Impedance () Tolerance Test Frequency (MHz) DC Resistance () max. Rated Current (mA) max. PE-0603PFB121ST 120 25% 100 0.05 2000 PE-0603PFB181ST 180 25% 100 0.09 1500 PE-0603PFB221ST 220 25% 100 0.05 2200 PE-0603PFB471ST 470 25% 100 0.2 1000 PE-0603PFB600ST 60 25% 100 0.04 3000 PE-0603PFB300ST 30 25% 100 0.02 5000 PE-0603PFB260ST 26 25% 100 0.01 6000 PE-0805PFB121ST 120 25% 100 0.03 3000 PE-0805PFB221ST 220 25% 100 0.07 2000 PE-0805PFB331ST 330 25% 100 0.1 1500 PE-0805PFB600ST 60 25% 100 0.025 3000 PE-1206PFB121ST 120 25% 100 0.03 3000 PE-1206PFB500ST 50 25% 100 0.03 3000 PE-1206PFB601ST 600 25% 100 0.1 2000 PE-1806PFB600ST 60 25% 100 0.01 6000 PE-1806PFB720ST 72 25% 100 0.04 6000 Mechanical PE-XXXXPFB B PCB LAYOUT T X A W N Y SUGGESTED LAND PATTERN Unit: mm Imperial Size A B W T X Y Z 0603 1.60.15 0.30.2 0.80.15 0.850.2 1.82.4 0.60.8 0.60.8 0805 2.0 (+0.3, -0.1) 0.50.3 1.250.2 0.850.2 2.43.6 0.81.2 0.91.6 1206 3.20.2 0.50.3 1.60.2 0.850.2 3.85.5 1.82.5 1.22.0 1806 4.50.2 0.50.3 1.60.2 1.60.2 5.36.7 2.43.2 0.91.6 All units in mm 16 Networking.PulseElectronics.com WC706.H (03/19) FERRITE BEAD EMI SUPPRESSOR SINGLE TYPE FOR POWER LINE APPLICATION Impedance Frequency Characteristics (Typical) X 250 Z 200 R 150 100 X 100 1000 0 10000 150 R 100 X 1 10 Frequency (MHz) PE-0603PFB260ST 100 1000 0 10000 1 10 30 90 100 1000 10 30 X 1 10 100 1000 0 10000 10 PE-0805PFB221ST 100 X Z 350 300 R 250 200 150 X 100 0 1000 PE-1206PFB500ST 100 1000 10000 Impedance () 60 R 40 X 20 100 1000 Frequency (MHz) 10000 10 1000 3000 PE-1206PFB121ST Z 60 R 40 X 0 100 Frequency (MHz) 1 10 Z 100 R X 50 1000 100 150 0 10000 1 10 100 1000 10000 Frequency (MHz) PE-1806PFB720ST 100 R 500 400 300 200 0 1 PE-1806PFB600ST Z 600 X 100 10 0 10000 100 700 1 80 PE-1206PFB601ST Z X 40 Frequency (MHz) 800 80 1000 R 80 200 Frequency (MHz) Frequency (MHz) 0 10 10000 100 100 20 1 10000 Z PE-0805PFB600ST 50 50 100 10 120 Frequency (MHz) Impedance () 150 10 1 100 400 R 1 R X 0 1000 Z 200 1000 100 PE-0805PFB121ST 300 PE-0805PFB331ST Impedance() Impedance () 200 0 100 450 Z 10 160 Frequency (MHz) 300 1 Frequency (MHz) 400 X R 1 Frequency (MHz) 250 3000 100 R 0 Impedance () Impedance () Z Impedance () Impedance () 60 20 X PE- 0603PFB471ST 600 500 Z Z 40 Frequency (MHz) PE-0603PFB300ST 120 80 R Frequency (MHz) 40 120 0 Impedance 10 Z 200 50 50 1 160 1 10 100 80 Impedance () 50 300 250 PE-0603PFB600ST Impedance () R 300 Impedance () Impedance () Z 100 0 Impedance () 200 150 PE-0603PFB221ST PE-0603PFB181ST Impedance () PE-0603PFB121ST Z 60 R 40 X 20 1000 Frequency (MHz) 10000 0 Z 80 R 60 40 X 20 1 10 100 1000 10000 0 1 10 100 1000 Frequency (MHz) Frequency (MHz) For More Information Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2019. Pulse Electronics, Inc. All rights reserved. WC706.H (03/19) Networking.PulseElectronics.com 17 10000