MS27466K
2 February 2012
SUPERSEDING
MS27466J
12 July 2002
DETAIL SPECIFICATION SHEET
CONNECTORS, RECEPTACLE, ELECTRICAL, WALL MOUNTING
FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES I
This specification is approved for use by all Department s
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein
shall consist of this specification sheet and MIL-DTL-38999.
FIGURE 1. Receptacle, classes E, T and P.
AMSC N/A FSC 5935
INCH-POUND
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:06Z
Check the source to verify that this is the current version before use.
MS27466K
2
Shell
size K
+.015
-.000
L (class E)
max
see basic
L (class P)
max
see basic
L (class T)
max
see basic
M
+.000
-.005
P dia
+.010
-.005
R
BSC S
± .020
9
.085
.531
.953
.531
.632
.128
.938
11
1.031
13
1.125
15
1.219
17
1.312
19
1.438
21
.115 1.047 .602
1.562
23
.147
1.688
25
1.156
1.812
FIGURE 1. Receptacle, classes E, T and P - Continued.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:06Z
Check the source to verify that this is the current version before use.
MS27466K
3
Inches
mm
Inches
mm
Inches
mm
.005
0.13
.406
10.31
.938
23.83
.007
0.18
.453
11.51
.953
24.21
.010
0.25
.4845
12.31
1.031
26.19
.015
0.38
.516
13.11
1.047
26.59
.085
2.16
.531
13.49
1.125
28.58
.115
2.29
.578
14.68
1.156
29.36
.128
3.25
.602
15.29
1.219
30.96
.147
3.73
.625
15.88
1.312
33.32
.156
3.96
.632
16.05
1.438
36.53
.266
6.76
.6875
17.46
1.562
39.67
.3595
9.13
.750
19.05
1.688
42.88
1.812
46.02
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for inf ormation only.
3. For main keyway and keyway positi ons, see MI L-DTL-38999.
4. The gauge features for GG shall be . 010 (0.25 mm) smaller t han the MMC size at basic location.
FIGURE 1. Receptacle, classes E, T and P - Continued.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:06Z
Check the source to verify that this is the current version before use.
MS27466K
4
REQUIREMENTS:
Dimensions and configuration: See figure 1. Interface dimensions shall be in accordance with
MIL-DTL-38999.
Mating connectors: This connector mates with MS27467, MS27661 and MS27653.
Insert arrangements: See MIL-STD-1560.
Part or Identif ying Number (PIN) ex ample:
MS27466 T 15 F 18 P A
MS number
Class
Shell size
Finish
Insert arrangement
Contact style
Polarizing positions
No letter designator is required for normal.
Specification restrictions
Navy
Army
Air Force
The entire specification sheet is
inactive for new design.
For ground equipment only, class
E is inactive for new design.
Classes E and P are
inactive for new de sign.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with
respect to the prev ious issue, due to the extent of t he changes.
Referenced docum ents. In addition t o MIL-DTL-38999, this document references the following:
MIL-STD-1560
MS27467
MS27653
MS27661
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:06Z
Check the source to verify that this is the current version before use.
MS27466K
5
CONCLUDING MATERIAL
Custodians: P reparing activi ty:
Army - CR DLA - CC
Navy - AS
Air Force – 85 (Project 5935–2012-019)
DLA - CC
Review activities:
Army - AR, MI
Navy - EC, MC, OS
Air Force - 19, 99
NOTE: The activi ties listed above were interested in this document as of the date of this document.
Since organizat ions and responsibilities can change, you shoul d verify the curre ncy of the information
above using the A S SIST Online data base at https://assist.daps.dla.mil.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:06Z
Check the source to verify that this is the current version before use.