PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. e g e Features T 1. Improves endurance against Board Bending Stress. 2. Reduces the board bending stress by the conductive polymer termination. 3. Use the GRJ21/31 types with flow or reflow soldering, and other types with reflow soldering only. L Part Number GRJ21A GRJ21B GRJ31B GRJ31C GRJ32Q GRJ32D GRJ43Q GRJ43D GRJ55D Applications 3.2 0.2 3.2 0.3 4.5 0.4 5.7 0.4 g min. 0.7 1.2 2.2 3.2 Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Electrode g min. (mm) Electrode e (mm) 1.0 0.7 0.3 min. 1.0 0.7 0.3 min. 1.25 1.0 0.7 0.3 min. 2.0 1.25 1.0 0.7 0.3 min. 4700pF 10% 2.0 1.25 1.0 0.7 0.3 min. X7R (EIA) 6800pF 10% 2.0 1.25 1.0 0.7 0.3 min. DC250 X7R (EIA) 10000pF 10% 2.0 1.25 1.25 0.7 0.3 min. GRJ31BR72E153KWJ1L DC250 X7R (EIA) 15000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR72E223KWJ1L DC250 X7R (EIA) 22000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31CR72E333KWJ3L DC250 X7R (EIA) 33000pF 10% 3.2 1.6 1.6 1.2 0.3 min. GRJ31CR72E473KWJ3L DC250 X7R (EIA) 47000pF 10% 3.2 1.6 1.6 1.2 0.3 min. GRJ31BR72E683KWJ1L DC250 X7R (EIA) 68000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ32QR72E683KWJ1L DC250 X7R (EIA) 68000pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRJ31CR72E104KWJ3L DC250 X7R (EIA) 0.10F 10% 3.2 1.6 1.6 1.2 0.3 min. GRJ32DR72E104KWJ1L DC250 X7R (EIA) 0.10F 10% 3.2 2.5 2.0 1.2 0.3 min. GRJ32QR72E154KWJ1L DC250 X7R (EIA) 0.15F 10% 3.2 2.5 1.5 1.2 0.3 min. GRJ43QR72E154KWJ1L DC250 X7R (EIA) 0.15F 10% 4.5 3.2 1.5 2.2 0.3 min. GRJ32DR72E224KWJ1L DC250 X7R (EIA) 0.22F 10% 3.2 2.5 2.0 1.2 0.3 min. GRJ43DR72E224KWJ1L DC250 X7R (EIA) 0.22F 10% 4.5 3.2 2.0 2.2 0.3 min. GRJ43DR72E334KWJ1L DC250 X7R (EIA) 0.33F 10% 4.5 3.2 2.0 2.2 0.3 min. GRJ55DR72E334KWJ1L DC250 X7R (EIA) 0.33F 10% 5.7 5.0 2.0 3.2 0.3 min. GRJ43DR72E474KWJ1L DC250 X7R (EIA) 0.47F 10% 4.5 3.2 2.0 2.2 0.3 min. GRJ55DR72E474KWJ1L DC250 X7R (EIA) 0.47F 10% 5.7 5.0 2.0 3.2 0.3 min. GRJ55DR72E105KWJ1L DC250 X7R (EIA) 1.0F 10% 5.7 5.0 2.0 3.2 0.3 min. GRJ31BR72J102KWJ1L DC630 X7R (EIA) 1000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR72J152KWJ1L DC630 X7R (EIA) 1500pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR72J222KWJ1L DC630 X7R (EIA) 2200pF 10% 3.2 1.6 1.25 1.2 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance Length L Width W Thickness T (mm) (mm) (mm) GRJ21AR72E102KWJ1D DC250 X7R (EIA) 1000pF 10% 2.0 1.25 GRJ21AR72E152KWJ1D DC250 X7R (EIA) 1500pF 10% 2.0 1.25 GRJ21AR72E222KWJ1D DC250 X7R (EIA) 2200pF 10% 2.0 GRJ21AR72E332KWJ1D DC250 X7R (EIA) 3300pF 10% GRJ21AR72E472KWJ1D DC250 X7R (EIA) GRJ21AR72E682KWJ1D DC250 GRJ21BR72E103KWJ3L Continued on the following page. 171 Product Information Safety Standard Certified GA3 Series 1. Ideal for use on diode-snubber circuits for switching power supplies. 2. Ideal for use as primary-secondary coupling for DC-DC converters. 3. Ideal for use on line filters and ringer detectors for telephones, facsimiles and modems. L 2.0 0.2 W Dimensions (mm) e W T 1.0 +0,-0.3 1.25 0.2 1.25 0.2 1.25 +0,-0.3 1.6 0.2 1.6 0.2 1.5 +0,-0.3 0.3 min. 2.5 0.2 2.0 +0,-0.3 1.5 +0,-0.3 3.2 0.3 2.0 +0,-0.3 2.0 +0,-0.3 5.0 0.4 AC250V Type GA2 Series Soft Termination Type GRJ series Only for Applications For General Purpose GRM/GRJ Series Chip Monolithic Ceramic Capacitors (Medium Voltage) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Electrode g min. (mm) Electrode e (mm) 1.25 1.2 0.3 min. 1.25 1.2 0.3 min. 1.6 1.25 1.2 0.3 min. 3.2 1.6 1.25 1.2 0.3 min. 15000pF 10% 3.2 1.6 1.6 1.2 0.3 min. X7R (EIA) 22000pF 10% 3.2 2.5 1.5 1.2 0.3 min. DC630 X7R (EIA) 33000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRJ32DR72J473KWJ1L DC630 X7R (EIA) 47000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRJ43QR72J683KWJ1L DC630 X7R (EIA) 68000pF 10% 4.5 3.2 1.5 2.2 0.3 min. GRJ43DR72J104KWJ1L DC630 X7R (EIA) 0.10F 10% 4.5 3.2 2.0 2.2 0.3 min. GRJ55DR72J154KWJ1L DC630 X7R (EIA) 0.15F 10% 5.7 5.0 2.0 3.2 0.3 min. GRJ55DR72J224KWJ1L DC630 X7R (EIA) 0.22F 10% 5.7 5.0 2.0 3.2 0.3 min. GRJ31BR73A471KWJ1L DC1000 X7R (EIA) 470pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR73A102KWJ1L DC1000 X7R (EIA) 1000pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR73A152KWJ1L DC1000 X7R (EIA) 1500pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR73A222KWJ1L DC1000 X7R (EIA) 2200pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR73A332KWJ1L DC1000 X7R (EIA) 3300pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ31BR73A472KWJ1L DC1000 X7R (EIA) 4700pF 10% 3.2 1.6 1.25 1.2 0.3 min. GRJ32QR73A682KWJ1L DC1000 X7R (EIA) 6800pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRJ32QR73A103KWJ1L DC1000 X7R (EIA) 10000pF 10% 3.2 2.5 1.5 1.2 0.3 min. GRJ32DR73A153KWJ1L DC1000 X7R (EIA) 15000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRJ32DR73A223KWJ1L DC1000 X7R (EIA) 22000pF 10% 3.2 2.5 2.0 1.2 0.3 min. GRJ43DR73A333KWJ1L DC1000 X7R (EIA) 33000pF 10% 4.5 3.2 2.0 2.2 0.3 min. GRJ43DR73A473KWJ1L DC1000 X7R (EIA) 47000pF 10% 4.5 3.2 2.0 2.2 0.3 min. GRJ55DR73A104KWJ1L DC1000 X7R (EIA) 0.10F 10% 5.7 5.0 2.0 3.2 0.3 min. Part Number Rated Voltage (V) TC Code (Standard) Capacitance GRJ31BR72J332KWJ1L DC630 X7R (EIA) 3300pF 10% 3.2 1.6 GRJ31BR72J472KWJ1L DC630 X7R (EIA) 4700pF 10% 3.2 1.6 GRJ31BR72J682KWJ1L DC630 X7R (EIA) 6800pF 10% 3.2 GRJ31BR72J103KWJ1L DC630 X7R (EIA) 10000pF 10% GRJ31CR72J153KWJ3L DC630 X7R (EIA) GRJ32QR72J223KWJ1L DC630 GRJ32DR72J333KWJ1L Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications For General Purpose GRM/GRJ Series Continued from the preceding page. 172 Length L Width W Thickness T (mm) (mm) (mm) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Test Method 1 -55 to +125C 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers - No failure should be observed when voltage in the Table is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. 4 Dielectric Strength No defects or abnormalities 5 Insulation Resistance (I.R.) CU0.01F: More than 100M * F CF0.01F: More than 10,000M 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.025 max. Rated Voltage DC250V DC630V DC1kV Test Voltage 200% of the rated voltage 150% of the rated voltage 120% of the rated voltage The insulation resistance should be measured with DC50050V (DC25025V in case of rated voltage: DC250V) and within 605 sec. of charging. The capacitance/D.F. should be measured at a frequency of 10.2kHz and a voltage of AC10.2V(r.m.s.) The capacitance measurement should be made at each step specified in the Table. 8 Capacitance Temperature Characteristics Cap. Change Within 15% (Temp. Range: -55 to +125C) Step 1 2 3 4 5 Temperature (C) 252 Min. Operating Temp.3 252 Max. Operating Temp.2 252 *Pretreatment Perform a heat treatment at 150+0 -10C for 605 min. and then let sit for 242 hrs. at room condition.* 9 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 Appearance No defects or abnormalities Capacitance Within the specified tolerance 10 Vibration Resistance D.F. Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 0.025 max. Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 173 Only for Applications Specifications AC250V Type GA2 Series Item Operating Temperature Range Safety Standard Certified GA3 Series No. Product Information Medium Voltage Soft Termination TypeGRJ GRJSeries SeriesSpecifications Specifications and and Test TestMethods Methods For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Medium Voltage Soft Termination Type GRJ Series Specifications and Test Methods GRJ Series Specifications and Test Methods Continued from the preceding page. No. Item Specifications Capacitance Within 12.5% Change b 4.5 RSTUZX, X_$&%!# Only for Applications Test Method Appearance No marking defects d 20 50 Pressurizing speed: 1.0mm/s Pressurize 40 c a 11 Deflection 100 R230 t : 1.6 Fig. 2 AC250V Type GA2 Series LZW (mm) 2.0Z1.25 3.2Z1.6 3.2Z2.5 4.5Z3.2 5.7Z5.0 12 Safety Standard Certified GA3 Series Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. Solderability of Termination a 1.2 2.2 2.2 3.5 4.5 Dimension (mm) b c 4.0 1.65 5.0 2.0 5.0 2.9 7.0 3.7 8.0 5.6 Capacitance Within 10% Change D.F. Resistance 13 to Soldering I.R. Heat d 0.025 max. CU0.01F: More than 100M * F CF0.01F: More than 10,000M 45 45 (in mm) Fig. 3 1.0 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Flexure=3 Capacitance meter Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 20.5 sec. Immersing speed: 252.5mm/s Temp. of solder: 2455C Lead Free Solder (Sn-3.0Ag-0.5Cu) 2355C H60A or H63A Eutectic Solder Preheat the capacitor at 120 to 150C* for 1 min. Immerse the capacitor in solder solution at 2605C for 101 sec. Let sit at room condition* for 242 hrs., then measure. *Immersing speed: 252.5mm/s *Pretreatment 0 Perform a heat treatment at 150+ -10C for 605 min. and then let sit for 242 hrs. at room condition.* Product Information *Preheating for more than 3.2Z2.5mm Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Within 7.5% Change 14 D.F. 0.025 max. I.R. CU0.01F: More than 100M * F CF0.01F: More than 10,000M Temperature Cycle Step 1 2 Temperature 100 to 120C 170 to 200C Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 242 hrs. at room condition,* then measure. Step 1 2 3 4 Temperature (C) Min. Operating Temp.3 Room Temp. Max. Operating Temp.2 Room Temp. Time (min.) 303 2 to 3 303 2 to 3 *Pretreatment 0 Perform a heat treatment at 150+ -10C for 605 min. and then let sit for 242 hrs. at room condition.* Dielectric Strength In accordance with item No.4 Solder resist Cu Glass Epoxy Board Fig. 4 Appearance No marking defects Capacitance Within 15% Change Humidity 15 (Steady State) D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Let the capacitor sit at 402C and relative humidity of 90 to 95% for 500+24 - 0hrs. Remove and let sit for 242 hrs. at room condition,* then measure. *Pretreatment 0 Perform a heat treatment at 150+ -10C for 605 min. and then let sit for 242 hrs. at room condition.* * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 174 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note C02E.pdf 10.12.20 Medium Voltage Soft Termination TypeGRJ GRJSeries SeriesSpecifications Specifications and and Test TestMethods Methods Continued from the preceding page. Specifications Appearance No marking defects Capacitance Within 15% (rated voltage: DC250V, DC630V) Change Within 20% (rated voltage: DC1kV) D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M 16 Life Dielectric Strength In accordance with item No.4 Test Method Apply voltage as in Table for 1,000+48 - 0hrs. at maximum operating temperature 3C. Remove and let sit for 242 hrs. at room condition,* then measure. Rated Voltage DC250V DC630V DC1kV Applied Voltage 150% of the rated voltage 120% of the rated voltage 110% of the rated voltage Only for Applications Item The charge/discharge current is less than 50mA. *Pretreatment Apply test voltage for 605 min. at test temperature. Remove and let sit for 242 hrs. at room condition.* Appearance No marking defects Humidity Loading (Application: 17 DC250V, DC630V item) Capacitance Within 15% Change D.F. 0.05 max. I.R. CU0.01F: More than 10M * F CF0.01F: More than 1,000M Dielectric Strength In accordance with item No.4 Apply the rated voltage at 402C and relative humidity of 90 to +24 95% for 500- 0hrs. Remove and let sit for 242 hrs. at room condition,* then measure. *Pretreatment Apply test voltage for 605 min. at test temperature. Remove and let sit for 242 hrs. at room condition.* AC250V Type GA2 Series No. For General Purpose GRM/GRJ Series sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Product Information Safety Standard Certified GA3 Series * "Room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 175