SMBG5913 thru SMBG5956B, e3 SMBJ5913 thru SMBJ5956B, e3 SILICON 2.0 Watt ZENER DIODES SCOTTSDALE DIVISION APPEARANCE The SMBJ5913-5956B or SMBG5913-5956B series of surface mount 2.0 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part number. This series is equivalent to the JEDEC registered 1N5913 thru 1N5956B with identical electrical characteristics except it is rated at 2.0 W instead of 1.5 W with the lower thermal resistance features of the surface mount packaging. It is available in J-bend design (SMBJ) with the DO214AA package for greater PC board mounting density or in Gull-wing design (SMBG) in the DO-215AA for visible solder connections. It is also available as RoHS Compliant with an e3 suffix. Microsemi also offers numerous other Zener products to meet higher and lower power applications. NOTE: All SMB series are equivalent to prior SMS package identifications. WWW . Microsemi .C OM DESCRIPTION IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES APPLICATIONS / BENEFITS * * * * Surface mount equivalent to 1N5913 to 1N5956B Ideal for high-density and low-profile mounting Zener voltage available 3.3V to 200V Standard voltage tolerances are plus/minus 5% with B suffix and 10 % with A suffix identification * Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively * Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, and JANTXV are available by adding MQ, MX, or MV prefixes respectively to part numbers. * RoHS Compliant devices available by adding an "e3" suffix MAXIMUM RATINGS * * * * * * * * MECHANICAL AND PACKAGING Power dissipation at 25 C: 2.0 watts (also see derating in Figure 1). Operating and Storage temperature: -65C to +150C Thermal Resistance: 35 C/W junction to lead, or 100C/W junction to ambient when mounted on FR4 PC board (1oz Cu) with recommended footprint (see last page) Steady-State Power: 2 watts at TL < 80oC, or 1.25 watts at TA = 25C when mounted on FR4 PC board with recommended footprint (also see Figure 1) Forward voltage @200 mA: 1.2 volts (maximum) Solder Temperatures: 260 C for 10 s (maximum) Copyright (c) 2007 6-21--2007 REV H * * Regulates voltage over a broad operating current and temperature range Wide selection from 3.3 to 200 V Popular DO-214AA or DO-215AA packages and footprints for either high density J-bend or Gull-wing designs for visible solder joints Nonsensitive to ESD per MIL-STD-750 Method 1020 Withstands high surge stresses (see Figure 2) Moisture classification: Level 1 per IPC/JEDEC J-STD-020B with no dry pack required * CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 * TERMINALS: Gull-wing or C-bend (modified J-bend) tin-lead or RoHS compliant annealed matte-Tin plating solderable per MIL-STD-750, method 2026 * POLARITY: Cathode indicated by band. Diode to be operated with banded end positive with respect to opposite end for Zener regulation * MARKING: Includes part number without prefix (e.g. 5913B, 5913Be3, 5948C, 5956D, etc.) * TAPE & REEL option: Standard per EIA-481-1A with 12 mm tape, 750 per 7 inch reel or 2500 per 13 inch reel (add "TR" suffix to part number) * WEIGHT: 0.1 grams * See package dimensions on last page Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 SMBG(J)5913-5956B, e3 * * SMBG5913 thru SMBG5956B, e3 SMBJ5913 thru SMBJ5956B, e3 SILICON 2.0 Watt ZENER DIODES SCOTTSDALE DIVISION MICROSEMI PART NUMBER GULL-WING LEAD SMBJ5913 SMBJ5914 SMBJ5915 SMBJ5916 SMBJ5917 SMBJ5918 SMBJ5919 SMBJ5920 SMBJ5921 SMBJ5922 SMBJ5923 SMBJ5924 SMBJ5925 SMBJ5926 SMBJ5927 SMBJ5928 SMBJ5929 SMBJ5930 SMBJ5931 SMBJ5932 SMBJ5933 SMBJ5934 SMBJ5935 SMBJ5936 SMBJ5937 SMBJ5938 SMBJ5939 SMBJ5940 SMBJ5941 SMBJ5942 SMBJ5943 SMBJ5944 SMBJ5945 SMBJ5946 SMBJ5947 SMBJ5948 SMBJ5949 SMBJ5950 SMBJ5951 SMBJ5952 SMBJ5953 SMBJ5954 SMBJ5955 SMBJ5956 VZ Volts 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 TEST DYNAMIC CURRENT IMPEDANCE IZT ZZT mA Ohms 10.0 113.6 9.0 104.2 7.5 96.1 6.0 87.2 5.0 79.8 4.0 73.5 2.0 66.9 2.0 60.5 2.5 55.1 3.0 50.0 3.5 45.7 4.0 41.2 4.5 37.5 5.5 34.1 6.5 31.2 7.0 28.8 9.0 25.0 10.0 23.4 12.0 20.8 14.0 18.7 17.5 17.0 19.0 15.6 23.0 13.9 28.0 12.5 33.0 11.4 38.0 10.4 45.0 9.6 53.0 8.7 67.0 8.0 70.0 7.3 86.0 6.7 100.0 6.0 120.0 5.5 140.0 5.0 160.0 4.6 200.0 4.1 250.0 3.7 300.0 3.4 380.0 3.1 450.0 2.9 600.0 2.5 700.0 2.3 900.0 2.1 1200.0 1.9 KNEE CURRENT IZK mA 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 KNEE IMPEDANCE ZZK Ohms 500 500 500 500 500 350 250 200 200 400 400 500 500 550 550 550 600 600 650 650 650 700 700 750 800 850 900 950 1000 1100 1300 1500 1700 2000 2500 3000 3100 4000 4500 5000 6000 6500 7000 8000 REVERSE CURRENT IR adc 100.0 75.0 25.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 REVERSE VOLTAGE VR Volts 1.0 1.0 1.0 1.0 1.5 2.0 3.0 4.0 5.2 6.0 6.5 7.0 8.0 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.2 56.0 62.2 69.2 76.0 83.6 91.2 98.8 114.0 121.6 136.8 152.0 MAX. DC CURRENT IZM mA 606 554 512 464 425 392 356 321 293 266 242 218 200 181 166 153 133 122 110 100 90 82 73 66 60 54 50 45 41 38 34 32 29 26 24 10 20 17 16 14 13 12 10 9 NOTE 1: No suffix indicates a +/- 20% tolerance on nominal VZ. Suffix A denotes a +/-10% tolerance, B denotes a +/-5% tolerance, C denotes a +/-2% tolerance, and D denotes a +/-1% tolerance. NOTE 2: Zener voltage (Vz) is measured at TL = 30oC and 20 seconds after application of dc current. NOTE 3: The zener impedance is derived from 1 kHz ac voltage resulting from an ac current modulation having an rms value equal to 10% of the dc zener current (IZT or IZK) superimposed on IZT or IZK. See Micro Note 202 for zener impedance variation with different operating currents. NOTE 4: The maximum dc current (IZM) is based only on the maximum power of 2.0 watts at TL < 80oC. These values must be reduced by 37.5% (1.25 W) when mounted on PC boards as described in Maximum Ratings. Copyright (c) 2007 6-21--2007 REV H Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2 SMBG(J)5913-5956B, e3 SMBG5913 SMBG5914 SMBG5915 SMBG5916 SMBG5917 SMBG5918 SMBG5919 SMBG5920 SMBG5921 SMBG5922 SMBG5923 SMBG5924 SMBG5925 SMBG5926 SMBG5927 SMBG5928 SMBG5929 SMBG5930 SMBG5931 SMBG5932 SMBG5933 SMBG5934 SMBG5935 SMBG5936 SMBG5937 SMBG5938 SMBG5939 SMBG5940 SMBG5941 SMBG5942 SMBG5943 SMBG5944 SMBG5945 SMBG5946 SMBG5947 SMBG5948 SMBG5949 SMBG5950 SMBG5951 SMBG5952 SMBG5953 SMBG5954 SMBG5955 SMBG5956 C-BEND (MOD. "J") ZENER VOLTAGE WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS @ TL = 30oC SMBG5913 thru SMBG5956B, e3 SMBJ5913 thru SMBJ5956B, e3 SILICON 2.0 Watt ZENER DIODES SCOTTSDALE DIVISION TA on FR4 PC BOARD Typical Maximum Power in Watts Pd, Maximum Power Dissipation (Watts) TL WWW . Microsemi .C OM GRAPHS o Temperature ( C) TL Lead temp (C), or TA on FR4 PC Board Time in Milliseconds FIGURE 2 - Transient Surge Capability Square-Wave Pulse Width (non-Repetitive) in Milliseconds FIGURE 1 - Power Derating Curve C - Capacitance - Picofarads PACKAGE DIMENSIONS & PAD LAYOUT SMBJ SMBG A B C D E F K L MIN MAX .077 .083 .160 .180 .130 .155 .205 .220 .077 .104 .235 .255 .015 .030 .030 .060 MIN MAX 1.96 2.10 4.06 4.57 .381 .762 .760 1.520 DIMENSIONS IN MILLIMETERS 5.21 5.59 A B C A B C VZ - Zener Voltage - Volts 1.95 2.65 5.97 6.48 INCHES 0.320 0.085 0.110 INCHES .260 .085 .110 mm 8.13 2.16 2.79 mm 6.60 2.16 2.79 SMBG SMBJ FIGURE 3 - Capacitance vs Zener Voltage Copyright (c) 2007 6-21--2007 REV H Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3 SMBG(J)5913-5956B, e3 3.30 3.94 4/25/12 SMBJ5927Be3/TR13 | Microsemi Home Products Product Directory Discrete Pow er And Small Signal Products Zeners Zener Voltage Regulator Diode SMBJ5927Be3/TR13 (#312435) Zener Voltage Regulator Diode Overview Docs & Specs Diagrams Buy & Sample Description : The SMBJ5913-5956B or SMBG5913-5956B series of surface mount 2.0 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part number. This series is equivalent to the JEDEC registered 1N5913 thru 1N5956B with identical electrical characteristics except it is rated at 2.0 W instead of 1.5 W with the lower thermal resistance features of the surface mount packaging. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting density or in Gull-wing design (SMBG) in the DO-215AA for visible solder connections. It is also available as RoHS Compliant with an e3 suffix. Microsemi also offers numerous other Zener products to meet higher and lower power applications. Datasheet Division ROHS Microsemi Commercial Business Unit Privacy Policy Products Terms & Conditions Applications Site map Design Support Company PPG Extranet Login Careers Investors PPG Webex Portal Survey Copyright (c) 2011 Microsemi Corporation. All rights reserved. The Endwave logo is a registered trademark of Endwave Corporation. www.microsemi.com/en/products/product-directory/312435 1/1