SDDJE SeriesBasic information Page 1 of 3 ALPS Manufacturer of Electronic Components/Parts Catalog 10A 250V AC Qualified Power Switch SDDJE Series Detail Model No. SDDJE30300 Type Rocker Circuit arrangement DPST Travel 3.5mm Operating force 62N Mounting method Snap-in Terminal style Lead Frame Without Marking (knob) I-O mark Minimum packing unit (pcs.) 100 UL CSA 10A 250V AC SEMKO 6A/96A 250V~, 10(6)/250~ VDE 6A/96A 250V~, 10(6)/250~ BS 6A/96A 250V~, 10(6)/250~ Ratings satisfying local electrical appliance and material safety law 125V 10A Operating temperature range -10 to +55 Ratings 6A/96A 250V~ Electrical performance Contact resistance 100m max. Insulation resistance 500M min. 500V DC Voltage proof 2,000V AC for 1 minute Robustness terminal 10N for 1 minute Robustness of actuator Operating direction 25N Perpendicular direction 25N Mechanical performance 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively Vibration Resistance to soldering heat Manual soldering 35010, 30.5s 10,000 cycles Load: as ratings. Durability Operating life Cold Environmental performance Dry heat Damp heat -202 for 96h 852 for 96h 402, 90 to 95%RH for 96h http://www3.alps.com/WebObjects/catalog.woa/E/HTML/Switch/Power/SDDJE/SD... 10/19/2008 SDDJE SeriesBasic information Page 2 of 3 Dimensions Mounting Hole Reference Size Verify the performance under actual product conditions before use. Circuit Diagram Marking (knob) http://www3.alps.com/WebObjects/catalog.woa/E/HTML/Switch/Power/SDDJE/SD... 10/19/2008 SDDJE SeriesBasic information Page 3 of 3 1. Consult with us for other markings. 2. The standard color of the knob and casing is black. Other colors (gray, ivory) are available upon request. Notes are common to this series/models. 1. 2. 3. 4. 5. 6. 7. 8. 9. The lead terminals are also used as faston terminals (#187). (Use a positive lock connector type.) The lead terminal type can be built onto a board. (Manual soldering needed.) The right angle terminal in the reverse direction is also available. Standard products use the Grade V-2 material (Flame Class). Consult with us for the Grade V-0 type. Place your purchase order in N minimum package units (N: integer). Ask us for the export packaging unit. Products other than those listed in the above chart are also available. Please contact us for details. We can raise the working temperature range for in-vehicle applications upon request. Contact us if you have any requirements of this kind. This products can be used in vehicles. Although these products are designed to perform over a wide operating temperature range, please ensure that you receive and read the formal delivery specifications before use. Inquiries about Products For more information please contact: Products Information Center. 1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan Phone: +81 (3) 5499-8154 COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD. http://www3.alps.com/WebObjects/catalog.woa/E/HTML/Switch/Power/SDDJE/SD... 10/19/2008