ALPS Manufacturer of Electronic Components/Parts Catalog
10A 250V AC Qualified Power Swit ch SDDJE Series
Detail
Model No. SDDJE30300
Type Rocker
Circuit arrangement DPST
Travel 3.5mm
Operating force 6±2N
Mounting method Snap-in
Terminal style Lead
Frame Without
Marking (knob) I-O mark
Minimum packing unit (pcs.) 100
UL CSA 10A 250V AC
SEMKO 6A/96A 250V~, 10(6)/250~
VDE 6A/96A 250V~, 10(6)/250~
BS 6A/96A 250V~, 10(6)/250~
Ratings satisfying local electrical appliance and material safety law 125V 10A‡
Operating temperature range -10℃ to +55℃
Ratings 6A/96A 250V~
Electrical performance
Contact resistance 100mΩ max.
Insulation resistance 500MΩ min. 500V DC
Voltage proof 2,000V AC for 1 minute
Mechanical performance
Robustness terminal 10N for 1 minute
Robustness of actuator Operating direction 25N
Perpendicular direction 25N
Vibration
10 to 55 to 10Hz/min., the amplitude is 1.5mm for
all the frequencies, in the 3 direction of X, Y and Z
for 2 hours respectively
Resistance to soldering
heat Manual soldering 350±10℃, 3±0.5s
Durability Operating life 10,000 cycles
Load: as ratings.
Environmental performance
Cold -20±2℃ for 96h
Dry heat 85±2℃ for 96h
Damp heat 40±2℃, 90 to 95%RH for 96h
Page 1 of 3SDDJE Series｜Basic information
10/19/2008http://www3.alps.com/WebOb
j
ects/catalo
g
.woa/E/HTML/Switch/Power/SDDJE/SD...
Dimensions
Mounting Hole Reference Si ze
Verif
y
the performance under actual product conditions before use.
Circuit Diagram
Marking (knob)
Page 2 of 3SDDJE Series｜Basic information
10/19/2008http://www3.alps.com/WebOb
j
ects/catalo
g
.woa/E/HTML/Switch/Power/SDDJE/SD...
1. Consult with us for other markin
g
s.
2. The standard color of the knob and casing is black. Other colors (gray, ivory) are available upon request.
Notes are common to this series/models.
1. The lead terminals are also used as faston terminals (#187). (Use a positive lock connector type.)
2. The lead terminal type can be built onto a board. (Manual soldering needed.)
3. The right angle terminal in the reverse direction is also available.
4. Standard products use the Grade V-2 material (Flame Class). Consult with us for the Grade V-0 type.
5. Place your purchase order in N minimum package units (N: integer).
6. Ask us for the export packaging unit.
7. Products other than those listed in the above chart are also available. Please contact us for details.
8. We can raise the working temperature range for in-vehicle applications upon request. Contact us if you have any
requirements of this kind.
9. This products can be used in vehicles.
Although these products are designed to perform over a wide operating temperature range, please ensure that
y
ou receive and read the formal deliver
y
specifications before use.
Inquiries about Products
For more information please contact: Products Information Center.
1-7, Yukigaya-otsuka-machi, Ota-ku, Tokyo, 145-8501, Japan
Phone: +81 (3) 5499-8154
COPYRIGHT(C) 1995-2008 ALPS ELECTRIC CO.,LTD.
Page 3 of 3SDDJE Series｜Basic information
10/19/2008http://www3.alps.com/WebOb
j
ects/catalo
g
.woa/E/HTML/Switch/Power/SDDJE/SD...
