YAGEO CORPORATION SMD RESISTORS Thick Film Chip Resistors RC Series FEATURES Extremely Thin and Light Highly Reliable Multilayer Electrode Construction Compatible with all Soldering Process Highly Stable in Auto-Placement Surface Mounting Applications Barrier Layer End Termination Zero Ohm Jumper is Available Available in 8mm Tape & Reel per EIA RS481 Resistor(RuO2) (Jumper chip is a conductor) Overcoat Alumina Substrate Secondary Electrode (Nickel Plated) Internal Electrode (Ag-Pd) External Electrode (Solder Plated) DIMENSIONS Unit : mm I1 I1 H I2 I2 L W STYLE L W H I1 I2 RC0201 0.60 0.10 0.30 0.05 0.25 0.05 0.15 0.10 0.15 0.10 RC0402 1.00 0.10 0.50 0.05 0.35 0.05 0.20 0.10 0.25 0.10 RC0603 1.60 0.10 0.80 0.10 0.45 0.10 0.25 0.15 0.25 0.15 RC0805 2.00 0.10 1.25 0.10 0.50 0.10 0.35 0.20 0.35 0.20 RC1206 3.10 0.10 1.60 0.10 0.55 0.10 0.45 0.20 0.40 0.20 RC1210 3.10 0.10 2.60 0.15 0.55 0.10 0.50 0.20 0.50 0.20 RC2010 5.00 0.10 2.50 0.15 0.55 0.10 0.60 0.20 0.50 0.20 RC2512 6.35 0.10 3.20 0.15 0.55 0.10 0.60 0.20 0.50 0.20 23 Note : ELECTRICAL CHARACTERISTICS STYLE RC0201 RC0402 RC0603 RC0805 RC1206 RC1210 RC2010 RC2512 Power Rating @ 70C 1/20W 1/16W 1/10W 1/8W 1/4W 1/3W 3/4W 1W Operating Temp. Range -55C ~ +125C Maximum Working Voltage 25V 50V 50V 150V 200V 200V 200V 200V Maximum Overload Voltage 50V 100V 100V 300V 400V 400V 400V 400V Dielectric Withstand Voltage 50V 100V 100V 300V 500V 500V 500V 500V 10 ~ 1M 2 ~ 3.3M 1 ~ 22M Resistance Range E24Tol. 2%, 5% E96Tol. 0.5%, 1% 100 ~ 2.2M 100 ~ 2.2M Zero Ohm Jumper<(0.05) TCR 100ppm/C - - 10 ~ 1M 200ppm/C 10 ~ 1M 10 ~ 3.3M 1 ~ 10, >1M 400ppm/C - 2 ~ 10 - Jumper Criteria Rated Current (A) 0.5 1.0 1.0 2.0 2.0 2.0 2.0 2.0 Maximum Current (A) @<1sec 1.0 2.0 2.0 5.0 10.0 10.0 10.0 10.0 ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD 1% TOL. 5% TOL. Temperature Coefficient MIL-STD-202F, Method 304 - 55C to +125C Thermal Shock MIL-STD-202F, Method 107 5 Cycles, -55C to +125C (Step by Step 2 min.) (0.5%+0.05) (1%+0.05) Low Temperature Operation MIL-R-55342D, Para.4.7.4 One Hour at - 65C Followed by 45 Minutes RCWV (0.5%+0.05) (1%+0.05) Short Time Overload MIL-R-55342D, Para.4.7.5 2.5 Times RCWV for 5 Seconds (1%+0.05) (2%+0.05) Insulation Resistance MIL-STD-202F, Method 302 RCOV for 1 Minute >10G Dielectric Withstand Voltage MIL-STD-202F, Method 301 R.M.S. for 1 Minute by Type Resistance to Soldering Heat MIL-STD-202F, Method 210C Soldered to Test Board at 260C for 10 Seconds (0.5%+0.05) (1%+0.05) Moisture Resistance MIL-STD-202F, Method 106F 42 Cycles. Total 1000 Hours (0.5%+0.05) (2%+0.05) Life MIL-STD-202F, Method 108A 1000 Hours at 70C RCWV Intermittent (1%+0.05) (3%+0.05) Solderability MIL-STD-202F, Method 208G 230C for 5 Seconds Bending Strength JIS-C-5202, Para.6.1.4, Unit Mounted in Center of 90mm Board Length, Deflected 5mm (power chip 2mm) in Either Direction for 5 Seconds by Type >95% Coverage (1%+0.05) (1%+0.05) 14 35 Note : EXPLANATIONS OF ORDERING CODE For Chip Resistors (RC, RT, RJ, RL, RS, SK Series) & RW, RP Series Explanations of Ordering Code RC 0805 Code 1~2 Series Name See Index Code 3~6 Size Code See Following Table R F Code 8 Packing Style R=Paper Tape Reel K=Embossed Plastic Tape Reel B=Bulk Bag C=Bulk Cassette Code 7 Resistance Tolerance B= 0.1% C= 0.25% D= 0.5% F= 1% G= 2% J= 5% K= 10% D 10 Code 10~11 Special Type 07=7 inch Dia. Reel 10=10 inch Dia. Reel 13=13inch Dia. Reel MA=MA-Type Forming MB=MB-Type Forming MN=MN-Type Forming MW=MW-Type Forming Code 9 Temperature Coefficient of Resistance A= 5ppm/C B= 10ppm/C C= 15ppm/C D= 25ppm/C E= 50ppm/C F= 100ppm/C G= 200ppm/C H= 250ppm/C "-"Base on Spec. CODE 3~6 SIZE CODE (UNIT: INCHES) 0201=0.024 x 0.012 5020=0.472 x 0.196 0402=0.040 x 0.020 1210=0.122 x 0.102 5020=0.472 x 0.196 0603=0.063 x 0.033 2010=0.197 x 0.098 5021=0.472 x 0.196 0805=0.083 x 0.051 2512=0.250 x 0.126 5022=0.472 x 0.196 1206=0.122 x 0.063 1K47 Code 12~23 Resistance Value for Example 0R1 100K 1R 1M 10R 10M 100R 1K 10K