XAA117 Dual Single Pole OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max RON LED Current to Operate Ratings 60 150 16 1 Units VP mA mA Features * Low Drive Power Requirements (TTL/CMOS Compatible) * Arc-Free With No Snubbing Circuits * 3750Vrms Input/Output Isolation * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount Tape & Reel Version Available Description Clare's XAA117 is a dual 1-Form-A Solid State Relay that has two independently controlled, optically coupled MOSFET switches. The MOSFET switches and photovoltaic die use Clare's patented OptoMOS(R) architecture to provide 3750 Vrms of input-to-output isolation. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED. This dual single-pole OptoMOS relay provides a more compact design solution than discrete single-pole relays in a variety of applications, and saves board space by incorporating both switches in a single 8-Pin package. Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 Applications * Security * Passive Infrared Detectors (PIR) * Data Signaling * Sensor Circuitry * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Ordering Information Part # XAA117 XAA117S XAA117STR XAA117P XAA117PTR Description 8-Pin DIP (50/Tube) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1,000/Reel) 8-Pin Flat Pack (50/Tube) 8-Pin Flat Pack (1,000/Reel) Pin Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices CONTROL ILOAD + 90% 10%+ TON DS-XAA117-R01 www.clare.com TOFF 1 XAA117 Absolute Maximum Ratings Parameter Ratings Blocking Voltage 60 Reverse Input Voltage 5 Input Control Current 50 Peak (10ms) 1 150 Input Power Dissipation 1 Total Power Dissipation 2 800 Isolation Voltage, Input to Output 3750 Operational Temperature -40 to +85 Storage Temperature -40 to +125 1 2 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms C C Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C Electrical absolute maximum ratings are at 25C Electrical Characteristics Parameter Output Characteristics @ 25C Load Current Continuous 1 Peak On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25C Input to Output Capacitance 1 2 Conditions Symbol Min Typ Max t =10ms IL=150mA VL=60V IL ILPK RON ILEAK - 7 - 150 400 16 1 50V; f=1MHz TON TOFF COUT - 0.1 0.5 25 5 5 - IL=150mA IF=5mA VR=5V IF VF IR 0.05 0.9 - 1.2 - 1 1.4 10 mA mA V A - CI/O - 3 - pF IF=5mA, VL=10V Units mA A ms pF If both poles operate, the load current must be derated so as not to exceed the package power dissipation value. www.clare.com R01 XAA117 PERFORMANCE DATA* XAA117 Typical LED Forward Voltage Drop (TA=25C, IF=5mA) 35 XAA117 o Typical On-Resistance Distribution (TA=25C, IL=100mA) 20 25 20 15 10 15 Device Count (N) Device Count (N) Device Count (N) 30 25 10 5 5 0 1.22 1.23 1.24 1.25 LED Forward Voltage Drop (V) 25 6.9 6.8 XAA117 Typical Turn-On Time (TA=25C, IL=100mA, IF=5mA) 20 15 10 5 0 0 1.21 XAA117 Typical IF for Switch Operation (TA=25C, IL=100mA) 7.0 7.1 7.2 On-Resistance () 0.05 7.4 7.3 XAA117 Typical Turn-Off Time (TA=25C, IL=100mA, IF=5mA) 25 35 0.06 0.07 0.08 0.09 0.10 LED Current (mA) 0.11 XAA117 Typical Blocking Voltage Distribution (TA=25C) 15 10 5 15 10 5 80 85 90 95 Turn-On (s) 100 XAA117 Typical Load Current vs. Temperature (IF=2mA) 160 150 130 120 110 Both Poles 100 0.45 0.50 0.55 Turn-Off (ms) 0.60 90 15 10 84 0.65 85 86 87 88 89 Blocking Voltage (VP) 90 XAA117 Typical Blocking Voltage vs. Temperature 94 10 Leakage (nA) 140 0.40 XAA117 Typical Leakage vs. Temperature Measured Across Pins 5-6 or 7-8 (IL=max rated) 12 Single Pole 20 0 0.35 105 Blocking Voltage (VP) 75 25 5 0 0 Load Current (mA) 20 Device Count (N) Device Count (N) Device Count (N) 30 20 8 6 4 2 92 90 88 86 80 0 -40 70 1.6 -20 0 20 40 60 Temperature (C) 80 100 -20 0 20 40 60 Temperature (C) 80 84 -40 100 1.5 1200 485 1000 480 IF=50mA 1.4 IF=20mA 1.3 1.2 1.1 1.0 -40 600 0 20 40 60 Temperature (C) 80 100 475 470 400 IF=10mA IF=5mA IF=2mA IF=1mA -20 TOFF (s) 800 -20 XAA117 Typical Turn-Off vs. LED Forward Current (IL=100mA) XAA117 Typical Turn-On vs. LED Forward Current (IL=100mA) XAA117 Typical LED Forward Voltage Drop vs. Temperature TON (s) LED Forward Voltage Drop (V) -40 465 200 460 0 0 20 40 60 Temperature (C) 80 100 0 5 10 15 LED Forward Current (mA) 20 0 5 10 15 LED Forward Current (mA) 20 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 3 XAA117 PERFORMANCE DATA* XAA117 Typical On-Resistance vs. Temperature (IL=50mA, IF=1mA) 12 0.3 8 7 Turn-On (s) Current (mA) 0.1 0.0 -0.1 300 200 IF=5mA -20 0 20 40 60 Temperature (C) 80 -0.3 -1.5 100 -1.0 -0.5 0.0 0.5 1.0 XAA117 Typical Turn-Off vs. Temperature (IL=50mA) 0.18 XAA117 Typical IF to Operate vs. Temperature (IL=100mA) 0.16 IF=1mA & IF=5mA 500 IF (mA) 600 0.14 0.12 400 0.10 300 -20 0 20 40 60 Temperature (C) 0 -40 1.5 Voltage (V) 700 200 -40 400 100 -0.2 80 100 0.08 -40 -20 0 20 40 60 Temperature (C) 80 100 -20 0 20 40 60 Temperature (C) 80 100 XAA117 Energy Rating Curve Load Current (A) On-Resistence () 9 6 TOFF (s) 500 0.2 10 800 600 XAA117 Typical Turn-On vs. Temperature (IL=50mA) IF=1mA 11 5 -40 XAA117 Typical Load Current vs. Load Voltage (TA=25C, IF=1mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R01 XAA117 MANUFACTURING INFORMATION Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 8-Pin DIP Through-Hole Package PC Board Pattern 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 9.144 TYP. (0.360 TYP.) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 8-0.800 DIA. (8-0.031 DIA.) 7.620 0.254 (0.300 0.010) 6.350 0.127 (0.250 0.005) 7.620 0.127 (0.300 0.005) 3.302 (0.130) 8.077 0.127 (0.318 0.005) 2.540 0.127 (0.100 0.005) 7.239 TYP. (0.285) 7.620 0.127 (0.300 0.005) 4.064 Typ (0.160 Typ) Dimensions mm (inches) 0.889 0.102 (0.035 0.004) Recommended PCB Land Pattern 8-Pin Surface Mount Package 4.445 0.127 (0.175 0.005) 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 3.302 (0.130) 9.525 0.254 (0.375 0.010) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 8.077 0.127 (0.318 0.005) 2.54 (0.10) 0.635 0.127 (0.025 0.005) 8.90 (0.3503) 1.65 (0.0649) 7.620 0.254 (0.300 0.010) 0.65 (0.0255) 0.254 0.127 (0.010 0.0005) 4.064 Typ (0.160 Typ) Dimensions mm (inches) 0.889 0.102 (0.035 0.004) 8 Pin Flatpack Package 2.159 TYP. (0.085 TYP.) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 9.398 0.127 (0.370 0.005) 7.620 0.254 (0.300 0.010) 2.286 MAX. (0.090 MAX.) 2.54 (0.10) 0.635 0.127 (0.025 0.005) 0.203 (0.008) 8.077 0.127 (0.318 0.005) Recommended PCB Land Pattern 8.70 (0.3425) 1.55 (0.0610) 0.65 (0.0255) 9.652 0.381 (0.380 0.015) 2.159 TYP. (0.085 TYP.) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) R01 www.clare.com 5 MECHANICAL DIMENSIONS Tape and Reel Packaging for 8-Pin Surface Mount Package W = 16.30 max (0.642 max) 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1 8 Top Cover Tape K0 = 4.90 (0.193) K1 = 4.20 (0.165) Embossed Carrier Embossment P = 12.00 (0.472) Ao = 10.30 (0.406) Bo = 10.30 (0.406) Dimensions mm (inches) User Direction of Feed NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 Tape and Reel Packaging for 8 Pin Flatpack Package W = 16.30 max (0.642 max) 330.2 DIA. (13.00 DIA.) 1 Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 8 Bo = 10.30 (0.406) Top Cover Tape K0 = 2.70 (0.106) K1 = 2.00 (0.079) Embossed Carrier Embossment P = 12.00 (0.472) Ao = 10.30 (0.406) User Direction of Feed Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-XAA117-R01 (c)Copyright 2007, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 11/9/07