SOT-23 SURFACE MOUNT LED LAMP Part Number: KM-23ESGW-CA High Efficiency Red Super Bright Green Features Description z SOT-23 package surface mount LED lamp. The High Efficiency Red source color devices are made with z Low power consumption. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Long life - solid state reliability. Light Emitting Diode. z Package: 2000pcs / reel. The Super Bright Green source color devices are made with z Moisture sensitivity level : level 3. Gallium Phosphide Green Light Emitting Diode. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 5.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAA3940 APPROVED: WYNEC REV NO: V.10A CHECKED: Allen Liu DATE: MAY/03/2012 DRAWN: D.M.Su PAGE: 1 OF 6 ERP: 1202000007 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Viewing Angle [1] Min. Typ. 5 12 *3 *5 5 9 *5 *9 21/2 High Efficiency Red (GaAsP/GaP) KM-23ESGW-CA White Diffused 140 Super Bright Green (GaP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength High Efficiency Red Super Bright Green 627 565 D [1] Dominant Wavelength High Efficiency Red Super Bright Green 625 568 1/2 Spectral Line Half-width High Efficiency Red Super Bright Green C Capacitance VF [2] IR Max. Units Test Conditions *627 *565 nm IF=20mA *617 *568 nm IF=20mA 45 30 nm IF=20mA High Efficiency Red Super Bright Green 15 15 pF VF=0V;f=1MHz Forward Voltage High Efficiency Red Super Bright Green 2 2.2 2.5 2.5 V IF=20mA Reverse Current High Efficiency Red Super Bright Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. *Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating Temperature -40C To +85C Storage Temperature -40C To +85C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA3940 APPROVED: WYNEC REV NO: V.10A CHECKED: Allen Liu DATE: MAY/03/2012 DRAWN: D.M.Su PAGE: 2 OF 6 ERP: 1202000007 KM-23ESGW-CA High Efficiency Red SPEC NO: DSAA3940 APPROVED: WYNEC REV NO: V.10A CHECKED: Allen Liu DATE: MAY/03/2012 DRAWN: D.M.Su PAGE: 3 OF 6 ERP: 1202000007 Super Bright Green SPEC NO: DSAA3940 APPROVED: WYNEC REV NO: V.10A CHECKED: Allen Liu DATE: MAY/03/2012 DRAWN: D.M.Su PAGE: 4 OF 6 ERP: 1202000007 KM-23ESGW-CA Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAA3940 APPROVED: WYNEC REV NO: V.10A CHECKED: Allen Liu DATE: MAY/03/2012 DRAWN: D.M.Su PAGE: 5 OF 6 ERP: 1202000007 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAA3940 APPROVED: WYNEC REV NO: V.10A CHECKED: Allen Liu KM-23ESGW-CA DATE: MAY/03/2012 DRAWN: D.M.Su PAGE: 6 OF 6 ERP: 1202000007