SPEC NO: DSAA3940 REV NO: V.10A DATE: MAY/03/2012 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1202000007
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Parameter High Efficiency Red Super Bright Green Units
Power dissipation 75 62.5 mW
DC Forward Current 30 25 mA
Peak Forward Current [1] 160 140 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
iewing
Angle [1]
Min. Typ. 2θ1/2
KM-23ESGW-CA
High Efficiency Red (GaAsP/GaP)
White Diffused
5 12
140°
*3 *5
5 9
*5 *9
Super Bright Green (GaP)
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
*Wavelength value is traceable to the CIE127-2007 compliant national standards.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength
High Efficiency Red
Super Bright Green
627
565
*627
*565 nm IF=20mA
λD [1] Dominant Wavelength High Efficiency Red
Super Bright Green
625
568
*617
*568 nm IF=20mA
Δλ1/2 Spectral Line Half-width High Efficiency Red
Super Bright Green
45
30 nm IF=20mA
C Capacitance
High Efficiency Red
Super Bright Green
15
15 pF VF=0V;f=1MHz
VF [2] Forward Voltage High Efficiency Red
Super Bright Green
2
2.2
2.5
2.5 V IF=20mA
IR Reverse Current
High Efficiency Red
Super Bright Green
10
10 uA VR = 5V
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.