CP Vishay Dale Wirewound/Metal Oxide Resistors, Commercial Power, Axial Lead FEATURES * * * * * High performance for low cost Pb-free Meets or exceeds requirements of EIA Standard Available RS-344 High power to size ratio e3 Ceramic cases are available with circuit board stand-offs (designated with a - 3 model ending) RoHS* COMPLIANT Special inorganic potting compound and ceramic case provide high thermal conductivity in a fireproof package STANDARD ELECTRICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS GLOBAL MODEL PARAMETER POWER RESISTANCE RANGE WEIGHT (Typical) RATING P40 C 10 % Standard, 5 % Available W g WIREWOUND** METAL OXIDE** CP0002 2 0.1 - 1 k 100 - 12 k 2.0 CP0002...3 2 0.1 - 1 k 100 - 12 k 2.2 CP0003 3 0.1 - 2 k 150 - 22 k 3.4 CP0003...3 3 0.1 - 2 k 150 - 22 k 3.6 CP0005 5 0.1 - 2.4 k 150 - 27 k 4.8 CP0005...3 5 0.1 - 2.4 k 150 - 27 k 5.0 CP0007 7 0.1 - 5 k 1 k - 35 k 6.8 CP0007...3 7 0.1 - 5 k 1 k - 35 k 7.0 CP0010 10 0.1 - 7 k 1 k - 40 k 9.5 CP0010...3 10 0.1 - 7 k 1 k - 40 k 9.9 CP0015 15 0.1 - 8 k 1 k - 40 k 16.8 CP0015...3 15 0.1 - 8 k 1 k - 40 k 17.4 CP0020 20 0.1 - 10 k 1 k - 45 k 22.8 CP0020...3 20 0.1 - 10 k -- 23.6 CP0022 22 0.1 - 10 k -- 24.5 CP0022...3 22 0.1 - 10 k -- 25.3 CP0025 25 0.1 - 10 k -- 37.0 ** To specifically order a Wirewound sub-assembly for resistance values that overlap between the Wirewound and Metal Oxide technologies, the model will be a CPxxxx...85 for standard body and CPxxxx...91 for body with stand-offs. To specifically order a Metal Oxide sub-assembly for resistance values that overlap between the Wirewound and Metal Oxide technologies, the model will be a CPxxxx...100 for a standard body and CPxxxx...101 for body with stand-offs. If no dash type is specified, either technology may be supplied. UNIT WIREWOUND CHARACTERISTICS ppm/C 600 below 1 , 300 1 and above - 5 x rated power for 5 seconds Terminal Strength lb 10 minimum Operating Temperature Range C - 65/+ 275 Dielectric Withstanding Voltage VAC 1000 V (P x R)1/2 Temperature Coefficient Short Time Overload Maximum Working Voltage METAL OXIDE CHARACTERISTICS Temperature Coefficient ppm/C 300 for CP0002 to CP0005; 400 for CP0007 to CP0020 Short Time Overload - 5 x rated power for 5 seconds Terminal Strength lb 10 minimum Operating Temperature Range C - 65/+ 225 Dielectric Withstanding Voltage VAC 1000 V (P x R)1/2 Maximum Working Voltage NOTE: Wirewound CP resistors can reliably function as a fuse and as a resistor. Such components involve compromise between fusing and resistive functions; therefore, each design should be tailored to the application to ensure optimum performance. Contact factory by using the e-mail address at the bottom of this page for design assistance. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CP000515R00JB143 (preferred part numbering format) C P 0 0 GLOBAL MODEL (See Standard Electrical Specifications Global Model column for options) 0 5 1 5 VALUE R = Decimal K = Thousand R1500 = 0.15 1K500 = 1500 Historical Part Number example: CP-5-3 15 R 0 TOLERANCE H = 3.0 % J = 5.0 % K = 10 % 0 J B 1 4 3 PACKAGING E14 = Lead (Pb)-free bulk pack E31 = Lead (Pb)-free four layer bulk pack B14 = Bulk pack B31 = Four layer bulk pack SPECIAL (Dash Number) (up to 3 digits) From 1-999 as applicable 5 % B14 (will continue to be accepted) CP-5-3 15 5% HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE B14 PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 40 For technical questions, contact ww2aresistors@vishay.com Document Number 30213 Revision 12-Jan-06 CP Vishay Dale Wirewound/Metal Oxide Resistors, Commercial Power, Axial Lead DIMENSIONS GLOBAL MODEL CPxxxx F Typical E A B DIMENSIONS in inches [millimeters] A* B C D 0.031 0.031 0.031 0.031 [0.794] [0.794] [0.794] [0.794] C E F WIRE- METAL [0.025] WOUND OXIDE WIRE- METAL 0.125 WOUND OXIDE [3.175] MINIMUM 0.001 CP0002 0.688 0.250 [17.46] [6.35] 0.250 [6.35] -- 0.032 [0.813] 0.032 [0.813] 1.500 [38.10] 0.750 [19.05] CP0002...3 0.688 0.250 [17.46] [6.35] 0.250 [6.35] 0.313 [7.94] 0.032 [0.813] 0.032 [0.813] 1.500 [38.10] 0.750 [19.05] CP0003 0.875 0.313 [22.22] [7.94] 0.313 [7.94] -- 0.036 [0.914] 0.032 [0.813] 1.500 38.10] 1.000 [25.40] CP0003...3 0.875 0.313 [22.22] [7.94] 0.313 [7.94] 0.375 [9.52] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] CP0005 0.875 0.375 [22.22] [9.52] 0.344 [8.73] -- 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] CP0005...3 0.875 0.375 [22.22] [9.52] 0.344 0.406 [8.73] [10.32] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] CP0007 Metal Oxide = High temperature fired Metal Oxide film 1.391 0.375 [35.32] [9.52] 0.344 [8.73] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] CP0007...3 Core: Wirewound = Woven fiberglass Metal Oxide = Alumina ceramic 1.391 0.375 [35.32] [9.52] 0.344 0.469 [8.73] [11.91] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] CP0010 1.875 0.375 [47.62] [9.52] 0.344 [8.73] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] CP0010...3 1.875 0.375 [47.62] [9.52] 0.344 0.469 [8.73] [11.91] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] CP0015 1.875 0.500 0.500 [47.62] [12.70] [12.70] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] Terminals: Tinned copper CP0015...3 Part Marking: DALE, Model, Wattage, Value, Tolerance, Date Code 1.875 0.500 0.500 0.625 [47.62] [12.70] [12.70] [15.87] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] CP0020** 2.500 0.500 0.500 [63.50] [12.70] [12.70] 0.036 [0.914] 0.032 [0.813] 1.500 [38.10] 1.000 [25.40] CP0020...3 2.500 0.500 0.500 0.625 [63.50] [12.70] [12.70] [15.87] 0.036 [0.914] -- 1.500 [38.10] -- CP0022 2.500 0.500 0.500 [63.50] [12.70] [12.70] 0.036 [0.914] -- 1.500 [38.10] -- CP0022...3 2.500 0.500 0.500 0.625 [63.50] [12.70] [12.70] [15.87] 0.036 [0.914] -- 1.500 [38.10] -- CP0025 2.500 0.625 0.625 [63.50] [15.87] [15.87] 0.040 [1.016] -- 1.500 [38.10] -- CPxxxx...3 F Typical A C D 0.125 [3.18] Typical E B MATERIAL SPECIFICATIONS Element: Wirewound = Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Body: Steatite ceramic case with inorganic potting compound RATED POWER IN % End Caps: Tin plated steel 120 100 80 60 Wirewound 40 Metal Oxide 20 0 - 65 - 25 25 75 125 175 225 275 40 Derating AMBIENT TEMPERATURE IN C -- -- -- -- -- -- *Potting compound may extend outside of ceramic case up to 0.060" [1.52] maximum per side. **Dimensions for the metal oxide are: A = 2.360 [59.94], B = 0.570 [14.48], C = 0.530 [13.46], E = 0.032 [0.813], F = 1.000 [25.40] PERFORMANCE TEST CONDITIONS OF TEST Thermal Shock - 55 C to + 275 C (+ 225 C for Metal Oxide), 5 cycles, 30 minute dwell time (5.0 % + 0.05 ) R Short Time Overload 5 x rated power for 5 seconds (4.0 % + 0.05 ) R Dielectric Withstanding Voltage 1000 Vrms for one minute (2.0 % + 0.05 ) R Low Temperature Operation - 65 C, full rated working voltage for 45 minutes (3.0 % + 0.05 ) R Humidity 75 C, 90 % - 100 % RH, 240 hours (5.0 % + 0.05 ) R Load Life 1000 hours at rated power, + 25 C, 1.5 hours "ON", 0.5 hours "OFF" (10.0 % + 0.05 ) R Terminal Strength 5 pounds for 30 seconds; body twisted about axis, 3 360 rotations (2.0 % + 0.05 ) R Resistance to Solder Heat Terminal immersed 3.5 seconds in molten solder at 1/8" to 3/16" from body (4.0 % + 0.05 ) R Document Number 30213 Revision 12-Jan-06 For technical questions, contact ww2aresistors@vishay.com TEST LIMITS (EIA-344) www.vishay.com 41 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1