o Part Numbering Trimmer Potentiometers (Part Number) PV Z3 A 103 q w e r C01 R00 t y rTotal Resistance qProduct ID Product ID PV Trimmer Potentiometers wSeries Expressed by three figures. The unit is ohm. The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex.) Code eAdjustment Direction /Lead Type Series Code Adjustment Direction/ Lead Type Z2 SMD Open 2mm Size Carbon Resistive Element A Top R Rear A2 SMD Open 2mm Size Code Z3 F2 G3 M4 G5 32 12 36 37 Total Resistance 100 10 102 1000 104 100000 (=100k) tIndividual Specification A Top Series Code A Top PVA2 A01 Standard Type G Top K Rear C04 Standard Type (High-heat Resistance Type/Ultra-thin Type) A Top A Top, J-hook C01 Standard Type (High-heat Resistance Type/Top Adjustment) G Top, Gull-wing K Rear F01 High Characteristic Carbon Type (only PVZ3G) SMD Sealed 4mm Size A Top Top E01 SMD Sealed 5mm Square 11-turns A High-heat Resistance Type (for Rear Adjustment) SMD Open 3mm Size Carbon Resistive Element SMD Sealed 2mm Size SMD Sealed 3mm Size Lead Sealed 6mm Round Single-turn Lead Sealed 7mm Round 4-turns Lead Sealed 10mm Square 25-turns Lead Sealed 6mm Square 12-turns H Side H Top, Triangle PVZ2 PVZ3 Individual Specification Code C01 Standard Type D01 High-liability Type PVF2 A11 Standard Type (Resistance Change Characteristics: Linear) PVM4 P Top, Triangle R Top, Inline N Side, Triangle PV32/PV12 A01 Standard Type PVG3/ PV36/PV37 C01 Standard Type C01 Standard Type T Side, Triangle S Side, Triangle H Top, Triangle P Top, Triangle T Side, Triangle S Side, Triangle W Top, Inline PV36/PV37 PVG5 C31 Radial Taping C03 Standard Type yPackaging Y Top, Triangle Code Packaging P Side, Triangle A00 Ammo Pack X Side, Inline B00 Bulk Z Side, Triangle M00* Magazine W Top, Triangle R00 Reel Y Top, Inline P Side, Triangle X Side, Triangle Z Side, Inline * M12 for PV36P Type and M15 for PV36W/Y/X/Z Type.