© Semiconductor Components Industries, LLC, 2001
August, 2019 − Rev. 8 1Publication Order Number:
GF1A/D
GF1A - GF1M
General Purpose Rectifiers
(Glass Passivated)
Features
•Low Forward Voltage Drop
•High Current Capability
•Easy Pick and Place
•High Surge Current Capability
•This Device is Pb−Free and is RoHS Compliant
www.onsemi.com
MARKING DIAGRAM
SMA
CASE 403AE
(COLOR BAND DENOTES CATHODE)
$Y = ON Semiconductor Logo
&Z = Assembly Plant Code
&3 = Data Code (Year & Week)
GF1x = Specific Device Code
x = A/B/D/G/J/K/M
See detailed ordering and shipping information on page 2 o
f
this data sheet.
ORDERING INFORMATION
$Y&Z&3
GF1x
GF1A − GF1M
www.onsemi.com
2
ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise noted
Symbol Parameter
Value
Units
1A 1B 1D 1G 1J 1K 1M
VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V
IF(AV) Average Rectified Forward Current, @ TL = 125°C 1.0 A
IFSM Non−repetitive Peak Forward Surge Current
8.3 ms Single Half−Sine−Wave 30 A
Tstg Storage Temperature Range −65 to +175 °C
TJOperating Junction Temperature Range −65 to +175 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be af fected.
THERMAL CHARACTERISTICS
Symbol Parameter Value Units
PDPower Dissipation 1.8 W
RθJA Thermal Resistance, Junction−to−Ambient* 80 °C/W
RqJL Thermal Resistance, Junction−to−Lead* 26 °C/W
*Device mounted on PCB with 0.2 x 0.2″ (5.0 x 5.0 mm) copper pad areas.
ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise noted
Symbol Parameter
Device
Units
1A 1B 1D 1G 1J 1K 1M
VFMaximum Forward Voltage @ 1.0 A 1.0 1.2 V
trr Maximum Reverse Recovery Time
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 2.0 ms
IRMaximum Reverse Current @ Rated VR
TA = 25°C
TA = 125°C5.0
50
mA
CTTypical Capacitance
VR = 4.0 V, f = 1.0 MHz 15 pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
PACKAGE MARKING AND ORDERING INFORMATION
Device Device Marking Package Quantity†
GF1A GF1A
SMA 7500 / Tape & Reel
GF1B GF1B
GF1D GF1D
GF1G GF1G
GF1J GF1J
GF1K GF1K
GF1M GF1M
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
GF1A − GF1M
www.onsemi.com
3
TYPICAL CHARACTERISTICS
Figure 1. Forward Current Derating Curve Figure 2. Non−Repetitive Surge Current
Figure 3. Forward Voltage Characteristics Figure 4. Reverse Current vs. Reverse Voltage
Figure 5. Total Capacitance
0 20 40 60 80 100 120 140
0.001
0.01
0.1
1
10
100
Percent of Rated Peak Reverse Voltage [%]
Reverse Current, IR
[mA]
T = 125 Cº
A
T = 25 Cº
A
T = 75 C
º
A
0.01 0.1 1 10 100
1
2
5
10
20
50
100
Reverse Voltage, VR [V]
Total Capacitance, C T [pF]
0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2
0.01
0.1
1
10
100
Forward Voltage, V F [V]
Forward Current, I F [A]
T = 25 Cº
A
Pulse Width = 300 S
2% Duty Cycle
0 25 50 75 100 125 150 175
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
Lead Temperature [ºC]
Average Rectified Forward Current, I F [A]
RESISTIVE OR
INDUCTIVE LOAD
P.C.B. MOUNTED
ON 0.2 x 0.2”
(5.0 x 5.0 mm)
COPPER PAD AREAS
12 51020 50100
1
2
5
10
20
50
100
Number of Cycles at 60 Hz
Peak Forward Surge Current, I FSM [A]
m
GF1A − GF1M
www.onsemi.com
4
PACKAGE DIMENSIONS
SMA
CASE 403AE
ISSUE O
2.65
4.30
1.75
2.50 MAX
2.20
1.90
0.30
0.05
B0.203
0.050
2.05
1.95
A
C
B1.65
1.20
2.95
2.50
B5.60
4.80
B4.75
4.00
A
B
0.41
0.15
1.52
0.75
R0.15 4X
8
0
0.45
8
0DET AIL A
SCALE 20 : 1
GAGE PLANE
NOTES:
A. EXCEPT WHERE NOTED, CONFORMS
TO JEDEC DO214 VARIATION AC.
BDOES NOT COMPLY JEDEC STANDARD
VALUE.
C. ALL DIMENSIONS ARE IN MILLIMETERS.
D. DIMENSIONS ARE EXCLUSIVE OF
BURRS, MOLD FLASH AND TIE BAR
PROTRUSIONS.
E. DIMENSIONS AND TOLERANCE AS
PER ASME Y14.5−2009.
E. LAND PATTERN STD. DIOM5025X231M
LAND PATTERN RECOMMENDATION
TOP VIEW
SIDE VIEW
0.13 MCBA
0.13 MCBA
°
°
°
°
GF1A − GF1M
www.onsemi.com
5
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor ’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer ’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body . Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
P
UBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
GF1A/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
al
Sales Representative
◊
