IM Relay

The Best Relaytion

Slim line AND low profile

2 pole telecom/signal relay, polarized

Through Hole Types (THT), standard version

with 5.08 mm, narrow version with 3.2 mm between

the terminal rows

or

Surface Mount Type (SMT)

- Minimum board-space 60 mm2

- Switching current 2 A

- 2 changeover contacts (2 form C / DPDT)

- Bifurcated contacts, gold plated

- High sensitivity results in low nominal power consumption

140 mW for non latching

100 mW for latching version

- High surge capability (1.2/50 µs and 10/700 µs) meets

Bellcore GR 1089, FCC Part 68 and ITU-T K20, 21, 45

³1500 V between open contacts

Linecard application – analog, ISDN, xDSL,

PABX

Voice over IP

- Office and business equipment

- Measurement and control equipment

- Consumer electronics

Set top boxes, HiFi

- Medical equipment

Surge capability ³ 2500 V between open contacts

THT: 200 Vrms

Repetitive peak voltage 2500 V

Pollution degree: External: 2

Internal: 1

Flammability classification: V-0

Maximum operating temperature: 85°C

UL 508 File No. E111441

UL 60950

QC 160501-CH0001

IEC/EN60950 IEC Ref. Cert. No. 2170

Relay - top view

Non-latching type,

not energized condition

IM THT IM THT IM SMT IM SMT

Standard Narrow Gull Wings J-Legs

mm inch mm inch mm inch

L 10 ±0.08 0.393 ±0.003 10 ±0.08 0.393 ±0.003 10 ±0.08 0.393 ±0.003 10 ±0.08 0.393 ±0.003

W 6 ±0.08 0.236 ±0.003 5.7 ±0.3 0.224 ±0.012 6 ±0.08 0.236 ±0.003 6 ±0.08 0.236 ±0.003

H 5.65 -0.2 0.222 -0.008 5.85 -0.15 0.230 -0.006 5.65 -0.2 0.222 -0.008 5.65 -0.2 0.222 -0.008

S 0.3 ±0.05 0.011 ±0.002 0.3 ±0.05 0.011 ±0.002 N/A N/A N/A N/A

Gull Wings J Legs

1.5 1.13 3.4 0.15 140 16 IM00

3 2.25 6.8 0.30 140 64 IM01

4.5 3.38 10.3 0.45 140 145 IM02

5 3.75 11.4 0.50 140 178 IM03

6 4.50 13.7 0.60 140 257 IM04

9 6.75 20.4 0.90 140 574 IM05

voltage UI voltage UII

Vdc Vdc Vdc Vdc mW W / ± 10 %

1 coil

1 coil

1.5 1.13 4.1 - 1.13 100 23 IM40

3 2.25 8.1 - 2.25 100 90 IM41

Further coil versions are available on request.

UI = Minimum voltage at 23° C after pre-energizing

with nominal voltage without contact current

UII = Maximum continous voltage at 23°

The operating voltage limits UI and UII depend on

the temperature according to the formula:

and

Contact assembly

Contact material

Limiting continuous current at max. ambient temperature

Maximum switching current

Maximum swichting voltage

Maximum switching capacity

Thermoelectric potential

Minimum switching voltage

Initial contact resistance / measuring condition: 10 mA / 20 mV

Electrical endurance at contact application 0

at 30 Vdc / 2 A - 60 W

Mechanical endurance

UL contact ratings

Bifurcated contacts

Palladium-ruthenium, gold-covered

2 A

2 A

220 Vdc

250 Vac

60 W, 62.5 VA

< 10 mV

100 mV

< 50 mW

min. 1 x 105 operations

typ. 108 operations

220 Vdc / 0.24 A - 60 W

125 Vdc / 0.24 A - 30 W

250 Vac / 0.25 A - 62.5 VA

30 Vdc / 2 A - 60 W

between coil and contacts

IM07NS 1-1462038-7

IM40GR 5-1462037-1

IM40JR 5-1462037-2

IM40TS 5-1462037-0

IM40NS 1-1462038-8

IM41GR 5-1462037-4

IM41JR 5-1462037-5

IM41TS 5-1462037-3

IM41NS 1-1462038-9

IM42GR 3-1462037-1

IM43NS 2-1462038-1

IM44GR 6-1462037-2

IM44JR 6-1462037-3

IM44TS 6-1462037-1

IM44NS 2-1462038-2

IM45GR 6-1462037-4

IM45JR 6-1462037-5

IM45TS 3-1462037-2

IM45NS 2-1462038-3

IM46GR 6-1462037-7

IM47NS 2-1462038-5

IM Relays

4th generation slim line – low profile polarized 2 c/o telecom relay with

bifurcated contacts, available as non latching or latching relay with

1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption

of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay

5.65 mm height.

P2 Relays

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,

available as non latching or latching relay with 1 or 2 coils. Nominal

voltage range from 3 ... 24 V, coil power consumption 140 mW,

latching relays with 1 coil 70 mW. The P2 Relay is available as through

hole or surface mount type and capable to switch currents up to 5

A. Dielectric strength fulfills the Bellcore requirements according GR

1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).

Dimensions approx. 15 x 7,5 mm board space and 10 mm height.

type and capable to switch loads up to 60 W/62,5 VA. Dielectric

strength fulfills the Bellcore requirements according GR 1089 (2,5 kV

– 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FX2 is CECC/

IECQ approved and certified in accordance with IEC/EN 60950 and

UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm

FT2 / FU2 Relays

3rd generation non polarized, non latching 2 c/o telecom relay with

bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power

consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,

available as non latching or latching relay with 1 or 2 coils. Nominal

voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW

for the high sensitive version, 140... 300 mW for the standard version,

latching relays with 1 coil 100 mW.. The FP1 Relay is available as

through hole type and capable to switch loads up to

30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 /

160 µs). The FP2 is CECC/IECQ approved. Dimensions approx.

14 x 9 mm board space and 5 mm height.

MT2 / MT4

the MT4 only.

Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height,

MT4 approx. 20 x15 mm board space and 11 mm height.

D2n Relays

2nd generation non polarized 2 c/o relay for telecom and various

other applications. Nominal voltage range from 3 ... 48 V, coil power

consumption from 150 .... 500 mW. The D2n relay is capable to

switch currents up to 3 A. Dielectric strength fulfills the requirements

a wide range of applications, available as non latching or latching relay

with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power

consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay

is available as through hole or surface mount type and capable to

switch currents up to 1 A. Dielectric strength fulfills the requirements

according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.

13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for

SMT version.

W11 Relays

Low cost, non polarized 1 c/o relay for various applications. Nominal

voltage range from 3 ... 24 V, coil power consumption 450 mW,

sensitive versions 200 mW. The W11 relay is capable to switch

applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal

voltage range from 5 ... 24 V, coil power consumption 50...280 mW

for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays

are available in DIP or SIL housing and capable to switch currents up to

0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric

strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and

5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm

height for SIL version.

Cradle Relays

Extremely reliable and mature relay family of 1st generation for various

protected and hermetically sealed versions, with plug in or solder

Dimensions from approx. 19 x 24 to 19x35 mm board space and

30 mm height.

Other Relays

We offer a variety of different relay families for maintenance and

replacement purposes. These relays are up to 60 years old now, such

as Card Relay SN (V23030 / V23031 series), Small General Purpose

Relay (V23006 series), Small Polarized Relay (V23063 ... V23067

cies up to 3 GHz. Actually smallest RF relay available combining small

size, excellent RF performance and SMD solderability. Available as non

latching or latching relay with 1 or 2 coils and a nominal coil voltage

range from 3 ... 24 V, coil power consumption 140 mW, latching relays

with 1 coil 70 mW. Dimensions 14.6 x 7.3 x 10 mm.