This kit is for quickly evaluating the complete end-to-end solution provided by the Network
Interface – from host processor to Industrial Ethernet connection. Evaluation can be completed in 3
steps: 1) Connect your host to the UART or 16-bit Parallel interface; 2) Integrate the Unified
Interface API on your host; 3) Verify communication on the Industrial Ethernet connection. The
module or embedded design can then be integrated into your field device reducing your overall
time to market.
Setting up the evaluation environment is straightforward and allows you to focus on getting the
total solution working. Your host development environment connects to one end of the evaluation
kit, and a controller connects on the other end. The controller can be an actual device or a
simulator available from third party suppliers. Example code for the host processor allows you to
quickly learn how to communicate with the Network Interface and get it working with a controller.
This code can be tailored for your actual field device application.
The contents of the kit include:
• Baseboard
• Power Supply
• Ethernet Cable
• Serial Cable
• USB Memory Stick containing
Documentation and Example
Unified Interface Code for Host
The Network Interface Module is
sold separately.
Network Interface Evaluation Kit
Overview
Copyright © 2014 Innovasic, Inc. | All Rights Reserved.
5635 Jefferson Street NE, Suite A, Albuquerque, New Mexico 87109 USA
+1.505.883.5263 or 1.888.824.4184 (US Toll Free) or support@innovasic.com
Page 1 of 1
N
etwork Interface Evaluation Kit
6
/
19
/
201
5
htt
p
://www.innovasic.com/
p
roducts/networ
k
-interfac
e
-evaluatio
n
-kit
