1© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4013_PEG127 • 2/6/2017
One world. One KEMET
Benets
• 1,600 hours at +150°C
• Resistance to vibrations
• Resistance to high ambient temperature
• High ripple capability
• Polarized all-welded design
• Outstanding electrical performance
Overview
KEMET’s PEG127 is an electrolytic capacitor with
outstanding electrical performance. The device has a
polarized all-welded design, tinned copper wire leads, a
negative pole connected to the case, and plastic insulation.
The PEG127 winding is housed in a cylindrical aluminum
can with a high purity aluminum lid and high quality rubber
gasket, as well as high temperature capability in small
case sizes. The PEG127 has 1,600 hours operational life at
+150°C for all case sizes.
Applications
KEMET’s PEG127 is a high performance axial electrolytic
capacitor. It is designed for automotive applications with
high demands on resistance to vibrations and high ambient
temperature.
Axial Aluminum Electrolytic Capacitors
PEG127 Series, +150°C
Part Number System
PEG127 H A 318 0QT1
Series Rated Voltage (VDC) Size Code Capacitance Code
(µF) Version Capacitance
Tolerance Packaging
Axial Aluminum
Electrolytic
H = 25
K = 40
M = 63
See Dimension
Table
The last two
digits represent
signicant
gures. The rst
digit indicates
the total number
digits.
0 = Standard Q = −10 +30% See Ordering
Options Table
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
2© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4013_PEG127 • 2/6/2017
Axial Aluminum Electrolytic Capacitors – PEG127, +150°C
Performance Characteristics
Item Performance Characteristics
Capacitance Range 33 – 1,300 µF
Rated Voltage 25 – 63 VDC
Operating Temperature −40 to +150°C
Capacitance Tolerance −10/+30% at 100 Hz/+20°C
Shelf Life 5,000 hours at +105°C or 10 years at +40°C 0 VDC
Leakage Current I = 0.003 CV + 4.0 (µA)
C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.
Vibration Test Specications
Procedure Requirements
1.5 mm displacement amplitude or 20 g maximum
acceleration. Vibration applied for three 2-hour
sessions at 10 – 2,000 Hz (capacitor clamped by body).
No leakage of electrolyte or other visible
damage. Deviations in capacitance from initial
measurements must not exceed: Δ C/C < 5%
Standards IEC 60384–4 long life grade 40/125/56, AEC–Q200
Compensation Factor of Ripple Current (RC) vs. Frequency
Frequency 100 Hz 300 Hz 1 kHz 5 kHz 100 kHz
Coefcient 0.35 0.57 0.80 1.00 1.04
Compensation Factor of ESR (5 kHz,+125°C) vs. Frequency
Frequency 300 Hz 1 kHz 5 kHz 100 kHz
Coefcient 2.5 1.4 1.0 0.9
Compensation Factor of ESR (5 kHz,+125°C) vs. Temperature
Frequency −10°C 60°C 105°C 125°C
Coefcient 5.00 1.50 1.1 1
3© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4013_PEG127 • 2/6/2017
Axial Aluminum Electrolytic Capacitors – PEG127, +150°C
Test Method & Performance
Endurance Life Test
Conditions Performance
Temperature +150°C
Test Duration 1,600 hours
Ripple Current Maximum ripple current specied in table
Voltage The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor
Performance The following specications will be satised when the capacitor is tested at +20°C:
Capacitance Change Within 15% of the initial value
Equivalent Series Resistance Does not exceed 200% of the initial value
Leakage Current Does not exceed leakage current limit
Ordering Options Table
Packaging Kind Lead Length (mm) Lead and
Packaging Code
Standard Packaging Options
Bulk (box) 42+3/−2 L1
Tape & Reel See Dimension Table T1
4© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4013_PEG127 • 2/6/2017
Axial Aluminum Electrolytic Capacitors – PEG127, +150°C
Dimensions – Millimeters
SIDE VIEWEND VIEW (+)
L
L1
+
+
d
Length to Lead Bend
Polarity Indicator
LL LL
D
Size
Code
Dimensions in mm Bulk Taped Approximate
Weight
Grams
DLL1 dLL LL
±0.5 ±1 Minimum ±0.03 +3/−2 +3/−2
A10 20.0 26.0 0.8 42 31 3
B10 29.0 35.0 0.8 42 27 4
C13 20.0 26.0 0.8 42 31 4
D13 29.0 35.0 0.8 42 27 6
E13 37.0 43.0 0.8 42 24 7
Note: L1 is KEMET's recommendation for minimum distance between symmetrical Lead bend. Available only for Customer specic part numbers.
Lead bend dimensions must be specied and conrmed per article.
5© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4013_PEG127 • 2/6/2017
Axial Aluminum Electrolytic Capacitors – PEG127, +150°C
Shelf Life
The capacitance, ESR and impedance of a capacitor will not change signicantly after extended storage periods, however the
leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of ten years
at 40°C. See sectional specication under each product series for specic data.
Failure Rate
Estimated eld failure rate: ≤ 0.15 ppm (failures per year/produced number of capacitors per year).
The expected failure rate for this capacitor range is based on eld experience for capacitors with structural similarity.
Environmental Compliance
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental
effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like
China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic
equipment. All products in this catalog are produced to help our customers’ obligations to guarantee their products and fulll
these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed
from all designs to fulll the requirement of containing less than 0.1% of lead in any homogeneous material. KEMET will
closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed.
Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode
coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels
for RoHS compatible capacitors.
Because of customer requirements, there may appear additional markings such as LF = Lead Free or LFW = Lead Free Wires
on the label.
6© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4013_PEG127 • 2/6/2017
Axial Aluminum Electrolytic Capacitors – PEG127, +150°C
Table 1 – Ratings & Part Number Reference
(1) Insert packaging code. See Ordering Options Table for available options.
Packaging Quantities
Size Code Packaging Quantities
Tape and Reel Bulk
A
500
250
B
500
200
C
400
250
D
400
200
E
400
150
Marking
Capacitance, Rated Voltage (VDC)
Part Number KEMET Logo, Polarity Marks
4 Digit Date Code
(Year, Week),
Batch Number
VDC
Rated
Capacitance Size
Code
Case
Size Ripple Current Maximum ESR Maximum Part Number
100 Hz
20°C (µF)
D x L (mm)
≥ 5 kHz
100°C (A)
≥ 5 kHz
125°C (A)
≥ 5 kHz
140°C (A)
≥ 5 kHz
150°C (A)
100 Hz 20°C
(mΩ)
100 kHz 20°C
(mΩ)
5 – 100 kHz
125 – 150°C (mΩ)
25 180 A 10 x 20 2.4 1.7 1.1 0.49 560 255 80 PEG127HA3180Q(1)
25 360 B 10 x 29 3.5 2.5 1.6 0.71 281 130 43 PEG127HB3360Q(1)
25 470 C 13 x 20 3.8 2.8 1.8 0.79 226 110 40 PEG127HC3470Q(1)
25 900 D 13 x 29 5.6 4.0 2.6 1.15 118 58 23 PEG127HD3900Q(1)
25 1300 E 13 x 37 6.6 4.8 3.0 1.35 85 42 18 PEG127HE4130Q(1)
40 110 A 10 x 20 2.3 1.7 1.1 0.48 710 240 82 PEG127KA3110Q(1)
40 220 B 10 x 29 3.4 2.5 1.6 0.70 360 125 45 PEG127KB3220Q(1)
40 270 C 13 x 20 3.7 2.7 1.7 0.77 301 110 42 PEG127KC3270Q(1)
40 520 D 13 x 29 5.4 3.9 2.5 1.11 157 58 24 PEG127KD3520Q(1)
40 750 E 13 x 37 6.5 4.7 3.0 1.32 110 42 19 PEG127KE3750Q(1)
63 33 A 10 x 20 1.6 1.1 0.7 0.32 1700 370 181 PEG127MA2330Q(1)
63 68 B 10 x 29 2.4 1.7 1.1 0.49 825 185 92 PEG127MB2680Q(1)
63 80 C 13 x 20 2.7 1.9 1.2 0.55 704 160 82 PEG127MC2800Q(1)
63 160 D 13 x 29 4.0 2.9 1.8 0.83 354 82 44 PEG127MD3160Q(1)
63 230 E 13 x 37 4.9 3.5 2.2 1.00 250 59 32 PEG127ME3230Q(1)
VDC
Rated
Capacitance
Code Case Size Ripple Current ESR Part Number
7© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4013_PEG127 • 2/6/2017
Axial Aluminum Electrolytic Capacitors – PEG127, +150°C
Construction
Detailed Cross Section
Margin
Rubber Gasket
Aluminum Can
Welded
Terminal Tab (+)
Tinned Copper
Wire Lead (+)
Aluminum Can
Tinned Copper
Wire Lead (−)
Paper Spacer Impregnated
with Electrolyte
(First Layer)
Paper Spacer Impregnated
with Electrolyte
(Third Layer) Anode Aluminum Foil, Etched,
Covered with Aluminum Oxide
(Fourth Layer)
Cathode Aluminum Foil,
Etched (Second Layer)
High Purity
Aluminum Lid
Rubber Gasket
High Purity
Aluminum Lid
Welded
Terminal Tab (+)
Tinned Copper
Wire Lead (+) Welded
Terminal Tab (−)
Tinned Copper
Wire Lead (−)
8© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4013_PEG127 • 2/6/2017
Axial Aluminum Electrolytic Capacitors – PEG127, +150°C
Anode foil
Cathode foil
Tissues
Foil tab
Aging
Etching
Forming
Winding
Assembly
Filling (elyt)
Impregnation
Testing
Labeling
Packing
Sealing
Construction Data
The manufacturing process begins with the anode foil being
electrochemically etched to increase the surface area and
then “formed” to produce the aluminum oxide layer. Both the
anode and cathode foils are then interleaved with absorbent
paper and wound into a cylinder. During the winding process,
aluminum tabs are attached to each foil to provide the
electrical contact.
The winding is assembled to the capacitor Al-can and to
the Al-lid. The can is lled with electrolyte and the winding
is impregnated during a vacuum treatment. The capacitor
is sealed. Throughout the process, all materials inside the
housing must be maintained at the highest purity and be
compatible with the electrolyte.
Each capacitor is aged and tested before being packed. The
purpose of aging is to repair any damage in the oxide layer
and thus reduce the leakage current to a very low level. Aging
is carried out at elevated temperature and is accomplished by
applying voltage to the device while carefully controlling the
supply current. The process takes between 2 and 20 hours,
depending on voltage rating.
Damage to the oxide layer can occur due to a variety of
reasons:
• Slitting of the anode foil after forming
• Attaching the tabs to the anode foil
• Minor mechanical damage caused during winding
The following tests are applied for each individual capacitor.
Electrical:
• Leakage current
• Capacitance
• ESR
• Tan Delta
Mechanical/Visual:
• Pull strength test of wire terminals
• Print detail
• Box labels
• Packaging, including packed quantity
9© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com A4013_PEG127 • 2/6/2017
Axial Aluminum Electrolytic Capacitors – PEG127, +150°C
KEMET Electronic Corporation Sales Of ces
For a complete list of our global sales of ces, please visit www.kemet.com/sales.
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET speci cally disclaims – any warranty concerning suitability for a speci c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Kemet:
PEG127KC3270QL1 PEG127HB3360QL1 PEG127KA3110QL1 PEG127HC3470QL1 PEG127ME3230QL1
PEG127MD3160QL1 PEG127HD3900QL1 PEG127MC2800QL1 PEG127HE4130QL1 PEG127MA2330QL1
PEG127MB2680QL1 PEG127KB3220QL1 PEG127HA3180QL1 PEG127KD3520QL1 PEG127KE3750QL1